Scrub infested surfaces with a stiff brush to dislodge eggs. Vacuum the room extensively. Use a vacuum hose attachment to thoroughly vacuum cracks and crevices on furniture and along baseboards on the walls. Vacuum along baseboards, furniture, bed stands, rails, headboards, foot boards, bed seams, tufts, buttons, edges of the bedding, as well as the edges of the carpets (particularly along the tack strips). A good vacuum cleaning job may remove particles from cracks and crevices to encourage greater insecticide penetration. Bed bugs cling tightly to surfaces, so it is best to vacuum by scraping the end of the vacuum attachment over the infested areas to pull out the bed bugs. Caution: It is not good to use a bristle attachment, because you may transfer bed bugs to other areas since they cling to the brush. Dispose of vacuum cleaner bags after you are finished in an outdoor trashcan.
Apply as a coarse, low-pressure spray to harborage areas including crevices, baseboards, loose plaster, behind bed frames and headboards, beneath beds and furniture, and to bedsprings and bed frames. After removal of bed linens, apply Transport Mikron to mattress and boxsprings. Apply to tufts, edges, seams and folds (do not spray clothes or bed linens). Your may apply it to furniture, but not to areas where there is direct access to seating or arm placements. Infested bed linens should not be treated, but should be removed, placed in sealed plastic bags, and taken for laundering and drying at high temperatures.
CrossFire Bed Bug Concentrate has two different active ingredients for dual modes of action (both a quick kill and residual activity). Mix 3 oz of CrossFire Insecticide with one gallon of water or 0.75 oz per quart (Remember to use what you mix-within 24 hours.) Adjust the spray pattern to a mist by turning the nozzle. A low fine mist is best for most spraying, but you may need to use a stream to get into some cracks and crevices. If you can't get into the cracks and crevices use one of the aerosols described below with it's crack and crevice tips to reach into these areas.

Some patients develop blisters filled with blood or bloody fluid, especially on the arms and legs. These blood blisters are extremely rare and can burst, causing bleeding or oozing of the bloody fluid. Healthcare providers are not sure if the cause of these blisters is related to the bug or the human but have found groups of patients that were all bitten by bugs on the same train exhibiting this sign.


We are often asked, "How do you kill bed bugs?" While we would love to give a simple answer, this is actually a loaded question. There are many ways to kill a bed bug but, if you want to kill all of the bed bugs in your home or business, it is important to pay attention to the details. Here are some ways you can kill bed bugs, and what you should know about each.
Bedbugs are a species of insect known as cimex lectularius (literallycimex is Latin for bug and lactularius is Latin for bed). There is a second common species of bedbugs known as cimex hemiptera. These are known as the tropical bedbugs, staying within 30 degrees of the equator. There are published reports, many without supporting evidence, that each of the common bedbug species has chemically different saliva. Some researchers, however, have found no difference in the reactions caused by each species.
Mechanical approaches, such as vacuuming up the insects and heat-treating or wrapping mattresses, are effective.[3][6] An hour at a temperature of 45 °C (113 °F) or over, or two hours at less than −17 °C (1 °F) kills them.[6] This may include a domestic clothes drier for fabric or a commercial steamer. Bed bugs and their eggs will die on contact when exposed to surface temperatures above 180 °F (82 °C) and a steamer can reach well above 230 °F (110 °C).[31][15] A study found 100% mortality rates for bed bugs exposed to temperatures greater than 50 °C (122 °F) for more than 2 minutes. The study recommended maintaining temperatures of above 48 °C (118 °F) for more than 20 min to effectively kill all life stages of bed bugs, and because in practice treatment times of 6 to 8 hours are used to account for cracks and indoor clutter.[32] This method is expensive and has caused fires.[6][15] Starving them is not effective as they can survive without eating for 100 to 300 days, depending on temperature.[6] One expert recommends not trying to get rid of bed bugs exclusively on one's own.[29]
A hair dryer might seem like a safer way to kill bed bugs with heat. Unfortunately, their maximum temperature is rarely more than 150 degrees. That heat level can kill bed bugs, but only if you maintain the heat over them for several minutes. So unless you want to follow each bug you see around with a hair dryer until they eventually die, you’d probably be better off just hitting them with the thing.
To treat an allergic reaction, the doctor may prescribe an antihistamine, corticosteroid, or epinephrine injection. If the area is infected, he or she might prescribe an antibiotic or recommend an over-the-counter antiseptic. Finally, if it’s severe itchiness that you’re dealing with, applying corticosteroid or taking an antihistamine in pill or liquid form may be able to help.

To kill bed bugs is to save yourself from a lot of problems. However, before you could eliminate them, there are several preparatory steps that you first have to take so you will know how to get rid of bed bugs. With all those problems and pre-elimination work, many think it is better to prevent the pests by using bed bug spray than to let them in and just get rid of them.


Bed bugs are tiny, flat, wingless insects that range in color from nearly white to deep brown/reddish. The parasitic pests get their name from their hiding spot of choice – they prefer burrowing into bed frames and mattresses during the day, then become active at night when they feed on people and pets. Bed bugs are resilient pests that can hitch a ride on luggage, furniture, storage boxes, backpacks and clothing (but rarely humans), very quickly causing an infestation. 

For more information about bed bugs, including their biology and how to recognize them, see other factsheets on the Citybugs bed bug page.  The State of Michigan has also recently published a very detailed guide to Do-it-yourself bed bug control. Also, if you decide you need professional help, check out our advice onHow to Select a Bed Bug Control Professional, ENTO-033
Inspection for bed bug infestations must be very thorough. Your primary tool is a flashlight. Since bed bugs are cryptic insects and spend most of their time hiding, you will need a flashlight to find them. You must move and/or disassemble some items while searching including beds, dressers, carpets and rugs. While you inspect, be alert for a bed bug smell which has been described as an obnoxious sweetness or fresh, red raspberries. You should also look for accumulations of cast nymphal skins and for stains of blood spots on sheets and linens. A common location for bed bug infestations is a box spring. The framework is often made of wood and contains cracks can crevices suitable for harborage. Other common areas include wall voids, behind switch plates, interior corners of bedside tables, under the edges of wall to wall carpeting, couches and stuffed chairs.
Bed bugs could be hiding in all sorts of tight spaces in your room, like wood cracks, inside books and furniture, and along the baseboards and the edges of the carpet. In this step, we’re going to clean, vacuum, and steam those areas that bed bugs are likely to be. This will cut down on the bed bug population while making it harder for survivors to hide.
Before you begin your own bed bug treatment, you will need to prepare the room or rooms where bed bugs have been found, in addition to rooms that share walls with the infested rooms. Remove any items in the room that you absolutely cannot treat or that have already been treated. Cover items that will be removed from the room in plastic bags before moving to the next room to prevent any unseen bed bug from infesting another room.
Because bed bugs have become so prevalent in the past few years, many fear they’ll be their next victim. They became so anxious and paranoid of the possible bed bug presence. If you eliminate the pests though, you could have a certain sense of peace knowing that you would not be bothered or bitten them. However, you wouldn’t be able to sleep well for long if you would not kill bed bugs right and continuously do the bed bug preventive steps.

When bed bugs are suspected, sleeping and resting places should be thoroughly inspected. Check all possible hiding places, mindful that bed bugs, especially the young nymphs and eggs, can fit into very tiny cracks and crevices. Don’t overlook places where pets rest, and where bats or birds have entered structures. In these instances, bat or bird bugs, not bed bugs, may be present. If bats or birds are a source of infestation, they should be excluded from the premises. Note that bats and most bird species are protected by law and should not be killed. Contact the Illinois Department of Natural Resources for guidelines on bat or bird exclusion and removal.
Mix an insecticide labeled for use on bed bugs, such as Temprid FX, with water in a pump sprayer using the ratio found on the product label to create a bed bug spray. Spray onto baseboards, in corners, around door and window frames, around bed frames, and under furniture. Do not broadcast spray an entire carpet or floor. Allow the spray to dry before moving on to the next step.
With the bed now fully isolated and elevated, bed bugs hiding elsewhere in the room won’t be able to feed on you or hide in your bed. You can also use the ClimbUps to monitor the changing population of bed bugs in your home. Hopefully, you will see less and less bugs appear in the traps as you go through the next steps. Now that you have created a safe haven in your bed, you can move on to treating the rest of the room.
×