Bed bugs multiply quickly, and in just six months, a few can turn into a full-on infestation of 13,000 or more. Detection is critical to break the bed bug life cycle before they become a bigger problem. Orkin Bed Bug Detection Service gets to the root of the problem with targeted inspections of common bed bug hiding places in your home and ongoing monitoring to ensure the pests never return.
Susceptibility to arthropod bites depends on many external factors, such as occupation, conditions of employment, cohabitation with a variety of domestic animals, housing, climate, and clothing. An arthropod is usually attracted to its host by body heat, carbon dioxide in exhaled air, vibration, human sweat, and/or odor. The Cimex (bedbug) genus attacks both mammals and birds. C hemipterus (the tropical bedbug) bites mostly humans and is found in warm climates, whereas C lectularius (the common bedbug) also attacks bats and domestic animals, such as chickens.
While alcohol can kill bed bugs on contact, it’s not going to kill nearly enough of bed bugs to be considered effective. In lab studies, even 99 percent concentrations of alcohol only killed between 40% to 60% of the adults that were sprayed. On top of that, alcohol has no long-lasting residual effect, and doesn’t affect bed bug eggs. 60% sounds good, but a contact killer should be able to kill a lot closer to 100% of the bed bugs you see. Otherwise, a shoe or a blowtorch would be the more reliable tool for the job. (Editor’s note: please don’t use a blowtorch.)
Nightstands and dressers may need to be emptied and examined inside and out, and tipped over to inspect the woodwork underneath. Oftentimes the bugs will be hiding in cracks, corners, and recesses. Other common bed bug hiding places include: along and under the edge of wall-to-wall carpeting, especially behind beds and sofas; cracks in wood molding; ceiling-wall junctures; behind wall-mounted pictures, mirrors, outlets and switch plates; under loose wallpaper; clothing and clutter within closets; and inside clocks, phones, televisions and smoke detectors.
It is also recommended to put infested items, such as a mattress, in a sauna that reaches temperatures of upwards of 170° Fahrenheit. Similarly, they also perish in extremely cold temperatures so mattresses and other items can be cleansed of these bugs with the use of plastic wrap and dry ice. Cover the items with large plastic tarps and carefully insert dry ice, and then secure. The extreme temperature will naturally fumigate the pests.
While your laundry cycle is running, use a vacuum cleaner to remove any bed bugs, shells, fecal droppings, or eggs that might be along the seams of your mattress, pillows, box spring, and along the cracks and crevices in the bed frame, headboard, and footboard. Follow up the vacuuming with a high pressure steamer to penetrate deep inside mattresses, box springs, bed frames, headboards, and footboards to kill bed bugs and eggs on contact.
Unfortunately standard insect monitors (“sticky traps”) are not very good at trapping bed bugs. To date, the best bed bug trap as measured by cost, ease of use, and effectiveness, is the “Climbup™ Insect Interceptor.” This trap resembles a plastic dish and is placed beneath the legs of beds and other furniture on which persons might relax and serve as “bait” for bed bugs. Bed bugs that climb into the dish are unable to climb its slippery inner surface (which is coated with talcum powder). Studies have shown that even inspections performed by trained and experienced pest management professionals often miss some bed bugs, especially in heavier infestations, and that bed leg traps can catch many of those missed bed bugs.
They also have the ability to travel beyond the bedroom, so all adjoining rooms should be checked for infestation. Any area that offers a layer of protection, e.g. dark, isolated areas, should be checked. They do leave excrement droppings behind, so even if they are not seen, you can often see where they have been. The best method to find them is to check only at night, and with a red light.
* Typically used for control of wood-destroying organisms, true fumigation of structures is occasionally performed for bed bug control. Fumigating a structure involves “tenting” it, i.e., draping and sealing it with tarps so that the fumigant, a poisonous gas, can be applied into and contained within the structure where it penetrates the contents and kills all pests within. Like whole-room heat treatments, fumigation has no lasting effect (it leaves no pesticide residue), is labor-intensive, and can damage contents. It is also more expensive, especially in northern states where fumigations are done less frequently. The advantage of fumigation over heat treatment may be that fumigation is more likely to kill all the pests within a structure.
Do encasements work? Yes. When you put an encasement on your mattress or box spring you can lock bed bugs in and prevent new bed bugs from getting in. No chemical control is needed, so you don't have to worry about being poisoned by powders or some other toxin in your bed. The problem is that encasements by themselves, or when used with traps, are simply a bandaid. They are not likely to contain or stop a bed bug infestation. As mentioned above, this method can lead to the growth of an infestation and, ultimately, a prolonged and frustrating infestation.
Bed bug sprays usually act as an insecticide and repellent. The best kind of bed bug sprays should kill bed bugs on contact and need to be used repeatedly to help eliminate your bug problem. According to the Texas A&M University, bed bug sprays are best used in combination with other bug control methods like natural bed bug powders. This is because bed bugs don’t build up resistance to natural bug powders and products like diatomaceous earth which kills bed bugs as long as the powder is dry.5
We are often asked, "How do you kill bed bugs?" While we would love to give a simple answer, this is actually a loaded question. There are many ways to kill a bed bug but, if you want to kill all of the bed bugs in your home or business, it is important to pay attention to the details. Here are some ways you can kill bed bugs, and what you should know about each.
Pyrethroid sprays are among the stronger and longer-lasting pesticides, but most bed bugs are resistant to these sprays to some degree. Special care should be taken when using pyrethroid sprays, especially when children are present. Only use pyrethroids in places indicated on the label. Do not spray electrical outlets with any type of liquid spray. Spraying should be done when children are not present, and all label directions followed carefully.
Bedbug bites, like all insect bites, can become infected through excessive scratching, as underneath the fingernails lies a host of bacterial pathogens. If your bites become infected, they will appear red and swollen, feel tender and may drain pus. Typically there will not be a fever unless a substantial area of the skin is involved. If you experience any of these symptoms, you must seek medical attention as it points to a secondary infection. Your physician may prescribe antibiotic therapy or, if the infection is mild, an antiseptic medication that you can buy without a prescription.
Insecticide Application This is the most common way to get rid of bedbugs, Lazarus says. Oftentimes, the professional will use several different products to effectively treat the area, though it may take a few rounds to ensure removal. “The advantage to this method is that the residual insecticide will continue to offer protection for a period of time,” Lazarus says. “The biggest drawback is that the preparation for service is time-consuming and must be repeated prior to each service.”
Most bed bug bites go away by themselves and don't need treatment. Keep the skin clean and try not to scratch. Over-the-counter, anti-itching cream for insect bites can help relieve the itching. If the bites are very itchy, your health care provider may prescribe cream or antihistamines to relieve the itchiness. Oral antibiotics may be prescribed for any secondary skin infection from excessive scratching.
Aerosols (D-Fense NXT, Crossfire Aerosol, or Bedlam Plus) Usage: Simply attach the plastic tip to the aerosol can. Apply as a crack and crevice or spot treatment where evidence of bed bugs occurs. This includes bed frames, box springs, inside empty dressers, clothes closets, curtain rods, hollow spaces, carpet edges, high and low wall moldings and wallpaper edges.
Because their bodies are flat, they can hide under the smallest spots like the border of beds, under the mattress, edges of carpets, couches, cracks in the walls and ceilings, in your pillows, under your bed sheets, behind electrical plugs and wall sockets, in your cupboards and dressers, or under furniture. In fact, bed bugs prefer any fabric materials. They can travel pretty good distances, too. Expect them to be able to be found anywhere in the room.
Start in the corners and along edges of an open wall. With the card, see if you can dig things out of the cracks and crevices. Work your way along the cracks and crevices. For example, if you are checking a baseboard along the floor, see if you can get the card between the baseboard and the floor, as well as the top of the baseboard and the wall. If you have a bare tile or wood floor, consider using a damp cloth or map to wipe the floor. Don’t use too much water as floors can be slippery. Look for anything moving after you wipe the floor. If you have carpeted areas vacuum the clean area. See Vacuuming Items to Capture Bed Bugs. Don’t forget to check pictures and other items on this wall.
You may be tempted to take treatment into your own hands. The nonchemical treatment options — such as heating and freezing — can help reduce the number of bedbugs you’re dealing with but probably won’t get rid of the population completely. Eggs and young bedbugs can be incredibly difficult to locate since they can be small enough to fit inside the head of a screw, Lazarus says.
Thanks to pesticide resistance, those cans of spray at your local hardware store simply will not do, Schal says, adding: "Relying strictly on chemicals is generally not a good solution." The most effective solutions are fumigation and heat treatments, but these can cost a cool $2,000 to $3,000 apiece for a single-family home. Scientists are diligently pursuing other strategies, including freezing and bait similar to that used for cockroaches. In the October 2010 issue of the Journal of Economic Entomology Schal and colleagues at the U.S. Department of Agriculture published a technique that employs inexpensive infrared and vibration sensors to track bedbug movement, which could be applied to the development of automated traps that detect the pests.
Treat mattress box spring and furniture voids with Cimexa Dust or Delta Dust. Turn bed box springs over and remove the cloth cover seal. Thoroughly inspect and treat the box springs area with insecticidal dust. After treatment replace the cloth cover seal with staples or screws. Hollow bed-frames, platforms, headboards and any other voids discovered during inspection should also be treated where possible. The upper mattress can be sprayed and treated with Bedlam Plus, Zenprox or Sterifab.
Prior to the widespread use of synthetic insecticides, this small, brown blood-sucking bug was perhaps the most unwanted pest in America. The insidious bed bug was loathed even more than the cockroach. Although the bug’s impact was greatly reduced by insecticides during the 1940s and 1950s, it remained an occasional invader of homes, hotels and shelters. Pest management professionals now agree that bed bugs have become the most difficult pest to control.
Research has shown that some bed bugs are resistant to the pyrethroid pesticides that have been most commonly used in recent years by pest management professionals. Likewise, pyrethroids such as deltamethrin and permethrin have been among the active ingredients most commonly available in pesticides at retail stores. The ongoing use of pyrethroids has undoubtedly contributed to the resistance we see today in some bed bug populations.
At room temperature, bed bugs can survive for up to 3 months without feeding. So, even if no one is living in the room, bed bugs can still survive, especially if there is enough moisture in the air. However, to get rid of bed bugs effectively, you should not just rely on bed bug sprays for exterminating the pests, you should have an integrated pest control management program. This includes using various methods for bed bug removal.