Research has shown that some bed bugs are resistant to the pyrethroid pesticides that have been most commonly used in recent years by pest management professionals. Likewise, pyrethroids such as deltamethrin and permethrin have been among the active ingredients most commonly available in pesticides at retail stores. The ongoing use of pyrethroids has undoubtedly contributed to the resistance we see today in some bed bug populations.
Insecticides might also have their work cut out for them: Entomologists have known that the common bedbug has built up resistance to some typical insecticides such as those containing certain pyrethroid chemicals like deltamethrin, according to Entomology Today. Deltamethrin apparently paralyzes an insect's nervous system, according to Cornell University.
Harris bed bug killer is another popular chemical spray to eliminate bed bugs from your home. The manufacturers say that Harris Bed Bug Killer can be used on all soft fabrics to get rid of bed bugs as it won’t stain. You can also spray the solution in all nooks and crannies in your bed frame, furniture, and corners of your room to exterminate the bugs. It is also odorless. You can get more information about Harris bed bug killer and purchase it in Amazon here.
Discourage bed bug infestation by keeping clutter picked up, washing bedding and upholstery routinely and not buying used furniture. When you’re traveling, lower your risk of bringing bed bugs back home by opening your suitcase on a hotel desk or luggage rack instead of on the bed; keeping your belongings in your suitcase, not unpacked in dresser drawers; sealing dirty laundry in plastic bags that can be taken straight to the laundry room at home; and inspecting your luggage for bed bug activity before you bring it into your bedroom.
You must repeat the entirety of Step 2 (except for the mattress and box spring treatment if you are encasing) every 7-10 days until no one in the home has bed bug bites and there is no further evidence (live bugs, cast skins, or fresh blood spots) found. This is absolutely crucial! Depending on the severity of the infestation it can take a minimum of 7-8 weeks, including repeat treatments. Failure to be thorough can prolong the process of getting rid of bed bugs and can make it harder to eliminate them.

To ensure that all bed bugs are killed, reapply the contact and residual sprays two weeks after the initial treatment, then again two weeks after that, for a total of three applications. These reapplications make sure that any eggs that have hatched will be killed off so that they can’t create a new infestation. Bed bug powders will not need to be reapplied, as they work for as long as they remain dry and undisturbed.

CrossFire Bed Bug Concentrate has two different active ingredients for dual modes of action (both a quick kill and residual activity). Mix 3 oz of CrossFire Insecticide with one gallon of water or 0.75 oz per quart (Remember to use what you mix-within 24 hours.) Adjust the spray pattern to a mist by turning the nozzle. A low fine mist is best for most spraying, but you may need to use a stream to get into some cracks and crevices. If you can't get into the cracks and crevices use one of the aerosols described below with it's crack and crevice tips to reach into these areas.


Adult bed bugs are brown, 1/4 to 3/8 inch long, and have a flat, oval-shaped body. Young bed bugs (called nymphs) are smaller and lighter in color. Bed bugs hide in a variety of places around the bed. They might also hide in the seams of chairs and couches, between cushions, and in the folds of curtains. They come out to feed about every five to ten days. But they can survive over a year without feeding.


Never treat any bedding, mattress, etc. with anything other than the treatments listed: borax, enzyme cleaner, Comet, sodium borate. Other pesticides and exterminating fluids can be harmful to humans. Even so, bedding and mattresses treated with chemicals such as borax or Comet should be left outside to dry naturally in the sun, then wrapped in plastic before next use, so as not to irritate the skin.
Stripping and vacuuming the mattresses and box springs, and encasing them.  Double bag your bedding and wash in hot water and dry for at least 30 minutes (discard the inner bag after putting bedding into the washer, as it could have bed bugs).  After vacuuming suspected bed bugs from the bed, take your vacuum cleaner outdoors and remove and discard the bag.  Purchase a good quality set of bed-bug-proof encasements for your mattresses and box springs. Bed bug-proof encasements are fabric sacks into which you slide your mattress or your box spring. The zippers on bed bug encasements are designed to be tight enough to prevent even the smallest life stages of the bed bugs from escaping. Also, good bed bug-proof encasements are woven to prevent bed bugs from biting you through the encasement. A good encasement will trap all bed bugs in the mattress and box spring inside, and will be smooth on the outside, providing few places for bed bugs to hide. Sears, Target, Walmart and other stores may sell bed bug-proof encasements, but these can also be purchased online. A good place to look for different brands and reviews of mattress encasements is Amazon.com (whether you buy there or at a local store). Go to http://www.amazon.com and search for “bed bug mattress protectors”.
The journal Insects published a study on products containing essential oils for bed bug control. It was found that essential oils like cedar oil, cinnamon oil, clove oil, peppermint oil, rosemary oil, and lemongrass oil all have insecticidal properties against bed bug populations. The study concluded that using these essential oils in a bug spray can be an effective way to reduce bed bug populations without putting humans at risk of exposure to chemicals.8
If all other options have been exhausted, you may need to seek a professional PMP (Pest Management Professional). There are pesticides that are approved for professionals to use during a infestation. These pesticides, however, are not always effective, and typically not as effective as steam cleaning, excessive heat, or excessive cold. The exterminator may opt to treat the area with carbon dioxide.
The life cycle stages of a bed bug are egg, nymph, and adult. The reason they are called bed bugs is that they readily infest mattresses, bed frames and box springs. Eggs are laid along the edges of or around buttons on the mattresses. Eggs can also be glued to rough surfaces. Bed bug females lay about 200 eggs, usually at the rate of three or four a day. Eggs are placed in cracks, crevices and other isolated and protected shelters. Females lay eggs after a blood meal. Eggs will hatch in one or two weeks into Nymphs. Newly hatched bugs (Nymphs) begin feeding immediately. At room temperature, and with an available food supply, the nymphal period will last 14 to 30 days. They shed their skin (Instar) five times before becoming adults. Bed bugs will mate soon after becoming mature, so the time from egg hatch to egg laying is 4 to 9 weeks, under favorable conditions. The average life span of the bed bug is 6-12 months and they feed every 10 days or so during this time. Bed bugs can survive many months without a blood meal and their reproduction is high.
Many news reports in recent years have focused on the discovery of bedbugs and their health effects (even in upscale five-star hotels), and a number of lawsuits have been filed by guests of fashionable hotels who awoke to find hundreds of bedbug bites covering their skin. Searching on travel-review web sites regularly reveals information and even photos confirming the presence of bedbugs in numerous hotels.
No two people react to bites in the same way, although some reactions are similar. Because of the saliva that they leave behind, the first reaction is usually severe itching and irritation. This is often followed by a raised appearance on the contacted area. Some people, however, react by having welts and hives all over the body. Still others will have small, pinkish bumps that are concentrated in one area.

Thanks to pesticide resistance, those cans of spray at your local hardware store simply will not do, Schal says, adding: "Relying strictly on chemicals is generally not a good solution." The most effective solutions are fumigation and heat treatments, but these can cost a cool $2,000 to $3,000 apiece for a single-family home. Scientists are diligently pursuing other strategies, including freezing and bait similar to that used for cockroaches. In the October 2010 issue of the Journal of Economic Entomology Schal and colleagues at the U.S. Department of Agriculture published a technique that employs inexpensive infrared and vibration sensors to track bedbug movement, which could be applied to the development of automated traps that detect the pests.


Alternatively, place a bed bug proof mattress cover over an infested mattress to trap the bed bugs inside and starve them to death. This will eliminate the need to purchase a new mattress/boxspring and make treatment and future inspections easier. (Starving the bugs CAN take up to 400 days, so make sure your cover stays sealed for at least that long.)[6]
Do encasements work? Yes. When you put an encasement on your mattress or box spring you can lock bed bugs in and prevent new bed bugs from getting in. No chemical control is needed, so you don't have to worry about being poisoned by powders or some other toxin in your bed. The problem is that encasements by themselves, or when used with traps, are simply a bandaid. They are not likely to contain or stop a bed bug infestation. As mentioned above, this method can lead to the growth of an infestation and, ultimately, a prolonged and frustrating infestation.
Bedbugs are found all over the world. Bed bug infestations were common in the U.S. before World War II and became rare after widespread use of the insecticide DDT for pest control began in the 1940s and 1950s. They remained prevalent in other areas of the world and, in recent years, have been increasingly observed again in the U.S. Increases in immigration and travel from the developing world as well as restrictions on the use of stronger pesticides may be factors that have led to the relatively recent increase in bedbug infestations. While bedbug infestations are often reported to be found when sanitation conditions are poor or when birds or mammals (particularly bats) are nesting on or near a home, bedbugs can also live and thrive in clean environments. Crowded living quarters also facilitate the spread of bedbug infestations.
What can I do about head lice? Head lice are tiny, parasitic insects that live on the scalp, usually on young children. They are not dangerous but are highly contagious and can be difficult to remove. Treatment involves OTC or prescription medication, but resistance to these treatments is growing. Learn more about treatment and home remedies here. Read now
Insecticide Application This is the most common way to get rid of bedbugs, Lazarus says. Oftentimes, the professional will use several different products to effectively treat the area, though it may take a few rounds to ensure removal. “The advantage to this method is that the residual insecticide will continue to offer protection for a period of time,” Lazarus says. “The biggest drawback is that the preparation for service is time-consuming and must be repeated prior to each service.”
CrossFire Bed Bug Concentrate has two different active ingredients for dual modes of action (both a quick kill and residual activity). Mix 3 oz of CrossFire Insecticide with one gallon of water or 0.75 oz per quart (Remember to use what you mix-within 24 hours.) Adjust the spray pattern to a mist by turning the nozzle. A low fine mist is best for most spraying, but you may need to use a stream to get into some cracks and crevices. If you can't get into the cracks and crevices use one of the aerosols described below with it's crack and crevice tips to reach into these areas.
The decline of bed bug populations in the 20th century is often credited to potent pesticides that had not previously been widely available.[44] Other contributing factors that are less frequently mentioned in news reports are increased public awareness and slum clearance programs that combined pesticide use with steam disinfection, relocation of slum dwellers to new housing, and in some cases also follow-up inspections for several months after relocated tenants moved into their new housing.[66]
If you arrive home and discover that you have brought some unwanted guests home with you, immediately notify the hotel of your discovery. Having a possible infestation in hotels and motels can be a public relations nightmare for the owners. Politely ask them to pay for any and all costs incurred to rid your clothing and home of a possible new infestation.

Most people use a combination of bed bug sprays and bed bug powders to kill off bed bugs fast. Bed bugs are notoriously difficult to get rid of and finding the right spray to eliminate bed bugs is not always easy. Many natural residual bed bug sprays contain natural ingredients that have a proven repellent and insecticidal action against these infesting bugs. Some feel that they have to resort to commercial bed bug sprays to completely get rid of an infestation of bed bugs.
Mix 8 ml (about 1/3 oz)(measurements on the bottle) or one 8 ml vial of Temprid FX with one gallon of water. Remember to use what you mix-within 24 hours. Adjust the spray pattern to a mist by turning the nozzle. A low fine mist is best for most spraying, but you may need to use a stream to get into some cracks and crevices. If you can't get into the cracks and crevices use one of the aerosols described below with it's crack and crevice tips to reach into these areas.
After the bugs developed resistance against many of the most powerful pesticides, such as DDT, exterminators had been increasingly relying on two chemicals—chlorfenapyr and bifenthrin. But until now, no one had looked at whether bed bugs were developing defenses against these chemicals too, says Ameya D. Gondhalekar, one of the study authors and a research assistant professor at the Center for Urban and Industrial Pest Management at the Department of Entomology at Purdue University.
"In the past, bedbugs have repeatedly shown the ability to develop resistance to products overly relied upon for their control. The findings of the current study also show similar trends in regard to chlorfenapyr and bifenthrin resistance development in bedbugs," study researcher Ameya Gondhalekar, research assistant professor at Purdue's Center for Urban and Industrial Pest Management, said in the Entomology Today statement. "With these findings in mind and from an insecticide resistance management perspective, both bifenthrin and chlorfenapyr should be integrated with other methods used for bed bug elimination in order to preserve their efficacy in the long term."
As soon as you determine you have bedbugs, isolate clothing, and start putting them into clean plastic bags. Accuracy is very important, so pinpoint the areas and rooms that need treatment and act swiftly. While some people think over-the-counter sprays are a solution, pyrethroid-based pesticides may kill or repel some of the insects, but can be dangerous if misused, and it's doubtful you'll be successful on your own.
Bed bugs have a fast and large reproduction nature. On an average, they can reproduce within 200 to 250 eggs at one time, and hatch during an interval between 6 to 10 days. Bed bugs largely live between 4 months to 6 months, and a 1-time treatment is not sufficient to cover the Bed Bug life stages. A 3 times treatment integrated with steam treatment and follow ups across 1.5 to 2 months is usually recommended. Read more here on 6 Questions to Get the Best Treatment for Bed Bugs.
Consumer Reports is an independent, non-profit organization dedicated to helping consumers. We make it easy to buy the right product from a variety of retailers. Clicking a retailer link will take you to that retailer’s website to shop. When you shop through retailer links on our site, we may earn an affiliate commission – 100% of the fees we collect are used to support our mission. Learn more. Our service is unbiased: retailers can’t influence placement. All prices are subject to change.
For more information about bed bugs, including their biology and how to recognize them, see other factsheets on the Citybugs bed bug page.  The State of Michigan has also recently published a very detailed guide to Do-it-yourself bed bug control. Also, if you decide you need professional help, check out our advice onHow to Select a Bed Bug Control Professional, ENTO-033

To know it's bedbugs, it's important to find the bugs themselves. Look at bedsheets and mattresses for little spots of blood, rusty-looking stains (crushed bugs), or black dots (bugs' poop). You might see live bugs around the seams or tags of mattresses and box springs, or in cracks of bed frames and other furniture. They can even hide in books, carpet edges, and electrical outlets.
You can check bedding, mattresses, furniture, and crevices in walls for bed bug infestation. Do your inspection just before dawn, which is when they are the most active. The bugs will be larger and slower after feeding. Bedbugs will quickly flee from light, so live bugs are best located in the folds and seams of mattresses and sheets. Bedbugs are about the size of an apple seed, about 1/4 inch long. They change from light brown to purple-red after feeding. You may also see their eggs, which are about the same size as the adults. The eggs will often be in seams, cracks, or crevices.
Perhaps more than any other structural pest, the bed bug illustrates the need for an integrated pest management (IPM) approach. IPM employs not a single method, such as pesticide application alone, but combines several of the best means of control, often adopting less hazardous and more effective pest management. Thus the best bed bug management plans incorporate more than one of the effective control methods listed below.

Some bed bug species are parasites of bats or birds, and may bite people if the wild hosts are no longer available. Although similar in overall appearance, the species of bed bugs that normally feed on bats, swallows, chimney swifts, pigeons or other wild hosts can be differentiated from those that prefer humans. Entomologists and knowledgeable pest managers can make this determination. If bat bugs or bird bugs are present, roosting and nesting sites should be the primary focus, and the animals should be removed and excluded from the building. 
Isolating your bed from the rest of the house.  If you don’t use a bed, purchase a frame that gets your mattress off the floor and install bed bug interceptors under all feet of the bed frame to keep bed bugs off your bed while you are sleeping. Interceptors are special platforms or cups that are purchased to prevent bed bugs from climbing on to your bed.  An interceptor can be as simple as a sticky card placed under a bed post (sticky and messy).  Better are one of the commercial pitfall traps made specifically for this purpose.  The Climbup™ Bed bug Interceptor and BlackOut BedBug Detector (Google them) are two such products sold online. Relatively inexpensive, these cups trap bed bugs attempting to climb (or exit) the bed. If you have encased your bedding, treated your bed frame thoroughly and installed interceptors, you will be instantly protected against bed bugs.  Don’t take out your clean bedding or put it back on the bed until the bed has been treated (and dried) and encasements installed. And note that for this method to be effective, beds and bedding must not touch the floor, furniture or walls.  This would provide bed bugs other ways to climb onto the bed and foil your defenses.
It is difficult to tell bedbug bites from those of mosquitoes, fleas, or other insects. You likely won't feel bedbugs biting as they inject an anesthetic and anticoagulant when they bite. You may develop bite marks one to 14 days after being bitten. As with mosquitoes, their saliva can provoke an allergic reaction at the site of the bite. Some people have no reaction, others have a mild one, while some can have significant swelling.
At room temperature, bed bugs can survive for up to 3 months without feeding. So, even if no one is living in the room, bed bugs can still survive, especially if there is enough moisture in the air. However, to get rid of bed bugs effectively, you should not just rely on bed bug sprays for exterminating the pests, you should have an integrated pest control management program. This includes using various methods for bed bug removal.
It’s perfectly natural to want to eliminate a bed bug infestation without spending a ton of money on professional-grade products or a treatment by a pest control operator. When people discover that they have bed bugs, they often turn to do-it-yourself recommendations from discussions on the Internet. These suggestions might include household items, some of which are recommended more often than others. Let’s take a closer look at some of the most popular items and how they might be used against bed bugs:
New tactics may be needed for this escalating public health concern in locations with high occupant turnover, such as hotels, hospitals, and nursing homes. [3] Indeed, in the past decade bedbugs have become a worldwide urban pest, with the number of American households affected markedly increased. [4] Genetic data suggest that C lectularius may be undergoing lineage divergence through host association. [5]
One method of applying freezing temperatures to bed bugs entails the use of carbon dioxide (CO2) applied as “snow” with a portable application device, i.e., Cryonite™. When applied directly onto bed bugs, the frozen CO2 will kill them. However, this method is similar to using contact pesticides, that is, there is no residual activity. It can kill only as many bed bugs as the applicator can find. The advantage of using this type of freezing device is that bed bugs may be killed quickly and without the use of more hazardous pesticides. Again, this is not a stand-alone treatment, and it is recommended that it be used as a supplemental to the application of residual pesticides and/or other means of control.
Some pest control firms also employ commercial steamers or spot-freezing equipment to treat areas where bed bugs are found or suspected. Used correctly, they kill bugs and eggs on contact. Neither method, however, affords residual protection against bed bugs which may have been missed. Steaming and spot-freezing equipment also have limited ability to penetrate fabric, wood, and other materials where bed bugs often reside. 

Human infestation with bedbugs, lice, and mites are common causes of dermatologic symptoms. Although these organisms thrive in conditions of overcrowding and decreased sanitation, Americans of all socioeconomic backgrounds may be at risk for infestation. Clinicians must maintain high suspicion in the appropriate set of clinical circumstances to identify and treat infestations, as they can cause substantial dermatologic and psychological discomfort for patients. Images courtesy of the US Centers for Disease Control and Prevention.


With practice and a flashlight, nonprofessionals can become proficient in finding and destroying bed bugs. The process is made easier by reducing clutter, especially in bedrooms and sleeping areas. Bugs that are spotted can be removed with a vacuum (see previous discussion), or killed with over-the-counter insecticides labeled for such use. Most bed bug sprays intended for householders have little remaining effect after the spray has dried. Therefore it’s important to initially contact as many of the insects as possible with the spray droplets. Insecticide labels should be read carefully as some bed bug products should not be used on mattresses and seating areas. Some insecticides applied as powders or dusts (e.g., diatomaceous earth) will kill bed bugs although boric acid powder will not. However powders can be messy and difficult to apply, especially by nonprofessionals. Total release foggers (otherwise known as ‘bug bombs’) are ineffective against bed bugs and potentially dangerous when used incorrectly (see University of Kentucky entomology fact sheet Limitations of Home Insect Foggers).
Treat other areas in your home.  This is perhaps the most challenging part of do-it-yourself bed bug control.  If you catch an infestation early you may not need to do anything more than treat and isolate your bed as described above.  But if an infestation has spread to other parts of the home, bed isolation may not be good enough. Here is where professional help may be needed, especially if you’re not up to moving furniture. Still determined?  Here are some tips that may improve your chances of success:

The only problem with Dee is that it is not safe if inhaled, the ground up po wder feels silky smooth but it is not, it is very jagged, this can only be seen under a magnified lens. (That is how it kills the bugs) it tears open their abdomen) With that being said the results of inhalation for humans as well as pets can be painful & expensive to cure. It causes respratory infection, as well as many other respratory issues, & can also lead to cancer. It is however very effective for the job.


The life cycle stages of a bed bug are egg, nymph, and adult. The reason they are called bed bugs is that they readily infest mattresses, bed frames and box springs. Eggs are laid along the edges of or around buttons on the mattresses. Eggs can also be glued to rough surfaces. Bed bug females lay about 200 eggs, usually at the rate of three or four a day. Eggs are placed in cracks, crevices and other isolated and protected shelters. Females lay eggs after a blood meal. Eggs will hatch in one or two weeks into Nymphs. Newly hatched bugs (Nymphs) begin feeding immediately. At room temperature, and with an available food supply, the nymphal period will last 14 to 30 days. They shed their skin (Instar) five times before becoming adults. Bed bugs will mate soon after becoming mature, so the time from egg hatch to egg laying is 4 to 9 weeks, under favorable conditions. The average life span of the bed bug is 6-12 months and they feed every 10 days or so during this time. Bed bugs can survive many months without a blood meal and their reproduction is high.
Bed bugs occur around the world.[36] Before the 1950s about 30% of houses in the United States had bedbugs.[2] Rates of infestations in developed countries, while decreasing from the 1930s to the 1980s, have increased dramatically since the 1980s.[3][4][36] Before the 1980s they were common in the developing world but rare in the developed world.[4] The increase in the developed world may have been caused by increased international travel, resistance to insecticides, and the use of new pest-control methods that do not affect bed bugs.[37]

Determine which rooms are infested. Bedrooms are the principal locations for bed bugs; however, any room where people sleep in the home may provide harborage for bed bugs. Living rooms with sofas and sofa beds are the next most common sites for bed bugs. Typically an infestation starts in one room and spreads slowly to other places where people sleep.  The sooner you find and treat bed bugs the easier it will be to get rid of them.  Wait too long and bed bugs may be found throughout your home.


In the case of beds, a more economical option is to encase both the mattress and box spring in a protective cover like those used for allergy relief. Encasements specifically designed to help protect against bed bugs are available through retail or pest control firms. Higher quality ones tend to be more durable and comfortable to sleep on. Once the encasement is installed and zipped shut, any bugs which happen to be inside are entombed and eventually will die. Encasements also help protect newly purchased beds, and make it easier to spot and destroy any bugs residing on the outer surface during subsequent examination. Encasements will not, however, keep bed bugs from crawling onto a bed and biting a sleeping person.
×