This includes identifying the bed bugs, assessing the structure and considering your treatment strategy. Bed bugs generally hide in cracks and crevices during normal daylight hours. They enter such areas easily because of their extremely flattened bodies. Typical hiding places are in the folds and tufts of mattresses, coils of springs, cracks and hollow posts of bedsteads, and upholstery of chairs and sofas. However, they are not restricted to these places. In heavy infestations, bed bugs are frequently found in places such as behind loose wallpaper, behind pictures on the wall, under door and window casings, behind baseboards, and even in light fixtures or medicine cabinets. When inspecting for bed bugs, you must look in any place that offers darkness, isolation, and protection.
Wash bedding and clothing (hot water and hot drying cycle for 30–60 minutes), vacuum cracks and crevices, and freeze articles that may have been used as hiding places for bedbugs may reduce infestation until extermination can be performed. Vacuum with special attention to cracks and crevices in furniture, equipment, walls, and floors. Vacuuming some talcum powder will reduce the chance that the bugs will crawl out of the vacuum cleaner. Dispose of the vacuum cleaner filter and bags in a tightly sealed plastic bag.
If you arrive home and discover that you have brought some unwanted guests home with you, immediately notify the hotel of your discovery. Having a possible infestation in hotels and motels can be a public relations nightmare for the owners. Politely ask them to pay for any and all costs incurred to rid your clothing and home of a possible new infestation.
Scrub infested surfaces with a stiff brush to dislodge eggs. Vacuum the room extensively. Use a vacuum hose attachment to thoroughly vacuum cracks and crevices on furniture and along baseboards on the walls. Vacuum along baseboards, furniture, bed stands, rails, headboards, foot boards, bed seams, tufts, buttons, edges of the bedding, as well as the edges of the carpets (particularly along the tack strips). A good vacuum cleaning job may remove particles from cracks and crevices to encourage greater insecticide penetration. Bed bugs cling tightly to surfaces, so it is best to vacuum by scraping the end of the vacuum attachment over the infested areas to pull out the bed bugs. Caution: It is not good to use a bristle attachment, because you may transfer bed bugs to other areas since they cling to the brush. Dispose of vacuum cleaner bags after you are finished in an outdoor trashcan.
Stripping and vacuuming the mattresses and box springs, and encasing them. Double bag your bedding and wash in hot water and dry for at least 30 minutes (discard the inner bag after putting bedding into the washer, as it could have bed bugs). After vacuuming suspected bed bugs from the bed, take your vacuum cleaner outdoors and remove and discard the bag. Purchase a good quality set of bed-bug-proof encasements for your mattresses and box springs. Bed bug-proof encasements are fabric sacks into which you slide your mattress or your box spring. The zippers on bed bug encasements are designed to be tight enough to prevent even the smallest life stages of the bed bugs from escaping. Also, good bed bug-proof encasements are woven to prevent bed bugs from biting you through the encasement. A good encasement will trap all bed bugs in the mattress and box spring inside, and will be smooth on the outside, providing few places for bed bugs to hide. Sears, Target, Walmart and other stores may sell bed bug-proof encasements, but these can also be purchased online. A good place to look for different brands and reviews of mattress encasements is Amazon.com (whether you buy there or at a local store). Go to http://www.amazon.com and search for “bed bug mattress protectors”.
Excessively scratching the itchy, bitten areas also may increase the chance of a secondary skin infection. Antiseptic creams or lotions can be used to ward off infection and antihistamines can be used to treat the itching. And an infestation can take a psychological toll on those affected: People whose homes have been infested with bedbugs may have trouble sleeping for fear of being bitten in the night. There are also public health, social and economic consequences; office buildings and schools often have to close if they are dealing with a bedbug infestation.
The mechanism of skin injury by arthropods depends on the structure of the mouthparts. These insects are categorized as vessel feeders if they insert the tip into a capillary or as pool feeders if they feed on the extravasated blood from damaged tissue. They often inject different pharmacologically active substances (eg, hyaluronidase, proteases, kinins), which may cause different skin reactions (eg, erythema, wheal, vesicle, hemorrhagic nodule). See the following images.
Some patients develop blisters filled with blood or bloody fluid, especially on the arms and legs. These blood blisters are extremely rare and can burst, causing bleeding or oozing of the bloody fluid. Healthcare providers are not sure if the cause of these blisters is related to the bug or the human but have found groups of patients that were all bitten by bugs on the same train exhibiting this sign.
Mix an insecticide labeled for use on bed bugs, such as Temprid FX, with water in a pump sprayer using the ratio found on the product label to create a bed bug spray. Spray onto baseboards, in corners, around door and window frames, around bed frames, and under furniture. Do not broadcast spray an entire carpet or floor. Allow the spray to dry before moving on to the next step.
Minimize its spread. First, notify your landlord if you rent in a building to control its spread to other units. Thoroughly vacuum any infested areas, including carpets and mattresses, and then empty the vacuum bag into a plastic bag, seal it, and throw it in the trash outside. If you can’t get the bed bugs out of your furniture, discard items in a responsible manner. To avoid someone else from salvaging infested furniture or mattreses, rip, remove stuffing, or spray paint with the words “bed bugs.”
Alternatively, place a bed bug proof mattress cover over an infested mattress to trap the bed bugs inside and starve them to death. This will eliminate the need to purchase a new mattress/boxspring and make treatment and future inspections easier. (Starving the bugs CAN take up to 400 days, so make sure your cover stays sealed for at least that long.)
Dismantling bed frames in infested areas typically exposes bed bug hiding sites. Having access to these areas during cleaning is important. Stand up the box spring and shine a flashlight through the gauze fabric and look for bed bugs. If the fabric is torn (possible hiding place), remove fabric to prepare for spraying. If the mattress and or box springs are infested, you may want to consider Encasements by Mattress Safe. Once covered with these encasements, bed bugs can not enter or exit. There is no need to treat the mattress or box spring when using these encasements. Keep them on for a year.
Perform a quick inspection of the upper piping every time you change your sheets. Make a more thorough examination by folding the piping over and closely inspecting both sides all the way around, top and bottom. Do this a couple times a year or every time you flip or rotate your mattress. If you spot any signs, keep reading to learn how to get rid of bed bugs.
When professionals need to treat an infestation, they don’t reach for rubbing alcohol or cedar oil or a blow dryer. They use a proven treatment process that involves a combination of proven products to get the job done. It’s not about whether or not a certain item can kill bed bugs, it’s about whether that item is the ideal part of a treatment that will actually get rid of an infestation. After all, your shoe would have a 100% kill rate on any bed bugs you smack with it – that doesn’t mean you can expect to be bed bug free after a diligent afternoon of shoe-wielding.
"By every metric that we use, it's getting worse and worse," says Coby Schal, an entomologist at North Carolina State University in Raleigh. Health authorities and pest control operators are regularly flooded with calls, and the epidemic may not have yet peaked. And because bedbugs are indoor pests, there are no high or low seasons throughout the year, he adds, only continual bombardment. "It's just the beginning of the problem in the U.S.," Schal says.
It’s not likely that you’ll kill all the bed bugs with a bed bug spray. That’s where a residual powder insecticide comes into play. It kills any bugs that wander through the powder. Some powders can kill bugs for many years if left undisturbed. Skip the open areas and spray the powder in those places where you think they’ll be traveling to and from, like near bed legs and under baseboard trim.
Bed bug sprays usually act as an insecticide and repellent. The best kind of bed bug sprays should kill bed bugs on contact and need to be used repeatedly to help eliminate your bug problem. According to the Texas A&M University, bed bug sprays are best used in combination with other bug control methods like natural bed bug powders. This is because bed bugs don’t build up resistance to natural bug powders and products like diatomaceous earth which kills bed bugs as long as the powder is dry.5
While alcohol can kill bed bugs on contact, it’s not going to kill nearly enough of bed bugs to be considered effective. In lab studies, even 99 percent concentrations of alcohol only killed between 40% to 60% of the adults that were sprayed. On top of that, alcohol has no long-lasting residual effect, and doesn’t affect bed bug eggs. 60% sounds good, but a contact killer should be able to kill a lot closer to 100% of the bed bugs you see. Otherwise, a shoe or a blowtorch would be the more reliable tool for the job. (Editor’s note: please don’t use a blowtorch.)
you probably ALREADY HAVE THEM..you cant let people that you know have an infestation of blood sucking parasites in your HOUSE..im sure you already have them but a hot dryer does kill them yes but thats not going to protect you these are very easily spread they fall off their bodies or hair right into your house & if you have children with bedbugs in your home you most likely already have them..sometimes people have no idea they even have them the bites dont affect some people..other people after about 3 week get an allergy & thats why the bites swell like hives..they became allergic & that can be a dangerous allergic reaction
So wear a face mask and just… bleach the crap out of your bed frame. Cover the mattress, repeatedly super heat your bedding and such, and bleach bleach bleach. MAKE SURE TO CHECK YOUR MATTRESS COVER. I did kill a few trying to hide in the zipper area. I picked out the crawlies with gloves and killed them, then repeatedly did a bleach scrub in case of any eggs. I do recommend the sticky traps a lot because if you keep your bed away from any walls or furniture, then the sticky traps will let you know if the bed bugs are coming from elsewhere.
Look for bedbug bites. You most likely know a bedbug infestation by a rash that resembles a mosquito bite. Most often these come at night but in an serious infestation they can occur during the day. A bedbug bite unlike a mosquito bite swells and spreads out. Also, the bites can come in lines and also burn unlike a mosquito bite. A mosquito bite stays round and neat looking.
Bring in only what is needed, and avoid sitting or placing coats and other items on beds, floors and sofas where the bugs commonly reside. Essential items can be placed on a tabletop or other hard surface, preferably away from bedrooms and sleeping areas. Better to sit on a hard (non-upholstered) chair than on sofas and recliners. Also try to avoid leaning or brushing against beds and upholstered furniture. If such items are carried out of infested dwellings (e.g., by sanitation workers or firefighters), it’s best to wrap them in plastic or at least not hold them against your body during transport. Emergency Medical (EMS) personnel may need to take additional precautions, such as removing a patient’s bed bug-infested shoes or clothing, or installing plastic sheeting before transporting them in the emergency vehicle.