To use sprays effectively to eliminate all traces of bed bugs, you need to know the signs of a bed bug infestation. The first sign that you may have bedbugs are some itchy bite marks on your skin when you wake up in the morning. Dr. Carol DerSarkissian on WebMD says that the bites from bed bugs cause red itchy bumps on the skin.3 You can learn about their other signs and symptoms in my articles on what do bed bug bites look like.
Low toxicity contact sprays like SteriFab™ or Bedlam® are likely to kill bed bugs only on contact. Alcohol- and soap-based sprays, are only partly effective. All of these products, once dry, are likely to provide no further control. Eggs will not be killed by alcohol-based sprays, so repeat treatments are usually needed. Be careful when using sprays containing alcohol because they may be flammable.
Bed bug eradication is challenging and it’s prudent to hire a professional when resources allow. However treatment can be expensive, often costing hundreds or thousands of dollars. Those who cannot afford this often must cope with the problem themselves. A useful step that anyone can take to combat bed bugs is to install bed encasements. Covering the mattress and box spring can help eliminate a substantial portion of the bed bug population -- especially if discovered early while most of the bugs are still confined to the bed area. Extra care should be taken when installing budget encasements since these can tear easily, especially on metal bed frames. Ideally both the mattress and box spring should be encased. If only one encasement is possible it’s often best to cover the box spring which is harder to subsequently inspect.
Bed bugs are attracted to their hosts primarily by carbon dioxide, secondarily by warmth, and also by certain chemicals.[4][16][17][18] Cimex lectularius only feeds every five to seven days, which suggests that it does not spend the majority of its life searching for a host. When a bed bug is starved, it leaves its shelter and searches for a host. It returns to its shelter after successful feeding or if it encounters exposure to light.[19] Cimex lectularius aggregate under all life stages and mating conditions. Bed bugs may choose to aggregate because of predation, resistance to desiccation, and more opportunities to find a mate. Airborne pheromones are responsible for aggregations.[20]
Dust the wall voids. Bed bugs can often travel from room to room, especially in apartments, hotels and condo's. They travel along electrical wiring and plumbing lines. Specifically treat wall voids with a hand duster either by removing wall switch plate covers and/or drill access holes discreetly between studs. Cimexa Dust or Delta Dust are excellent choices for void applications. It kills populations in walls and voids and creates a repellent, hostile environment which reduces the likelihood of bed bugs traveling through voids to other areas. Use a small hand type duster to "puff" insecticidal dusts into these areas. A light coating is all that is needed. To much dust and the bed bugs will just crawl around it.
To know it's bedbugs, it's important to find the bugs themselves. Look at bedsheets and mattresses for little spots of blood, rusty-looking stains (crushed bugs), or black dots (bugs' poop). You might see live bugs around the seams or tags of mattresses and box springs, or in cracks of bed frames and other furniture. They can even hide in books, carpet edges, and electrical outlets.
Kept replacing the sticky traps just in case but never caught anything other than the occasional spider. Always cycled the sheets and such using the car+sun. They were still getting to us. Bed bugs cannot fly or jump. They had to be in the bed frame. I check it over and notice rusty spotting, which is apparently bed bug fecal matter. Luckily ours was from IKEA so it was easy to take apart – and sure enough – there they were. The way my bed works is a metal frame with holes, rubber end caps fit into those holes, and wooden slats run across the frame in the end caps. So every few days I’d mix up a 50/50 mix of bleach and water in a bucket and soak the wooden slats and end caps for ten minutes. The bed bugs were gone a couple of weeks and came back. I started soaking the things longer and scraping them with a disposable spoon, which was hard to do on the end caps. It warped the wood a little but nothing too bad. After a couple of weeks or so, I stopped finding bed bugs in the frame. I was worried they were in the metal too, but I completely stopped getting bites. I think the added time and scraping got rid of eggs. Not a lot can survive a 30 minute bleach bath.
you have to get the heat treatment on your house & wash & dry EVERYTHING you own in a very hot dryer some there maybe some help to pay for it if you own your home w a no interest loan or if you rent you better tell your landlord he needs to treat his whole property & i bet he wont be happy its very expensive my moms apt bldg gets a dog checking every unit & its $850 for her tiny one bedroom..i just read a house can be $1500 to $2000 theres a hair treatment too its a very hot comb that costs about $150 a person..you cant be going to peoples homes anywhere you go youre spreading the joy 

A few decades ago, bedbugs were somewhat of a novelty in developed countries. But since the early 2000s, infestations have become more common in places like the United States, Canada, the United Kingdom and Europe, according to the U.S. Centers for Disease Control and Prevention (CDC). A 2013 study in the journal Nature Scientific Reports suggested that bedbugs have evolved ways to resist insecticides.
Discourage bed bug infestation by keeping clutter picked up, washing bedding and upholstery routinely and not buying used furniture. When you’re traveling, lower your risk of bringing bed bugs back home by opening your suitcase on a hotel desk or luggage rack instead of on the bed; keeping your belongings in your suitcase, not unpacked in dresser drawers; sealing dirty laundry in plastic bags that can be taken straight to the laundry room at home; and inspecting your luggage for bed bug activity before you bring it into your bedroom.
Some patients develop blisters filled with blood or bloody fluid, especially on the arms and legs. These blood blisters are extremely rare and can burst, causing bleeding or oozing of the bloody fluid. Healthcare providers are not sure if the cause of these blisters is related to the bug or the human but have found groups of patients that were all bitten by bugs on the same train exhibiting this sign.

Some preparation is still required (e.g. removal of heat-sensitive items such as aerosol cans, indoor plants and medications), but it is seldom necessary to bag, launder and/or hot dry bedding and clothing since these items will be heated along with other furnishings. Another advantage of heat treatment is that infestations can often be eliminated in one day, rather than over multiple days or weeks. Conversely, heat treatment alone has no lasting (residual) effect should bed bugs be reintroduced into the dwelling. Consequently, some companies recommend concurrently applying residual insecticides. To further minimize reintroduction, occupants are advised to take as few belongings as possible with them while the heat treatment is in progress.    


We are often asked, "How do you kill bed bugs?" While we would love to give a simple answer, this is actually a loaded question. There are many ways to kill a bed bug but, if you want to kill all of the bed bugs in your home or business, it is important to pay attention to the details. Here are some ways you can kill bed bugs, and what you should know about each.
If you suspect that bed bugs might be hiding in items that can’t be laundered or steamed, like books, papers, luggage, shoes, and dry-clean only clothing, you can treat those with a portable bed bug heater. Heaters are a popular way to safely heat-treat items during bed bug treatments, or as a preventative tool for travelers who want to ensure that bed bugs can’t escape from their luggage to infest their home.
Once the mattress and box spring are dry, encase them in sealed bed bug encasements. Encasements are crucial, as they prevent bed bugs from entering or escaping the mattress and box spring, cutting off key hiding places. Remember to leave the encasements on for at least 18 months to ensure that any bed bugs already inside have starved to death. Once the encasements have been applied, you can put your mattress and box springs back on your treated bed frame, and put your laundered bedding back on your bed.

Aerosols (D-Fense NXT, Crossfire Aerosol, or Bedlam Plus) Usage: Simply attach the plastic tip to the aerosol can. Apply as a crack and crevice or spot treatment where evidence of bed bugs occurs. This includes bed frames, box springs, inside empty dressers, clothes closets, curtain rods, hollow spaces, carpet edges, high and low wall moldings and wallpaper edges.
As mentioned earlier, applying insect repellent at bedtime will probably not deter bed bugs from biting. When working in severely infested dwellings, there may be some benefit to spraying tops and bottoms of shoes with DEET-based repellents. Those working in bed bug-infested environments may also want to hot wash or run clothing, etc. through a dryer upon returning home or to the office.    

Checking beds for bed bugs was a common practice long ago, especially while traveling. Travelers today should consider doing the same, preferably before unpacking. This would entail examining the bed sheets and seams of the mattress and perhaps box spring for signs of bed bugs, especially along the head (pillow end) of the bed. Experts also remove and check behind headboards since this is a frequent hiding place for bed bugs in hotels. Headboards are heavy and cumbersome, however, and untrained persons should not attempt removal themselves.
These nocturnal creatures can hide in beds, floors, furniture, wood, and paper trash during the day. We humans usually become their dinner during the night, with peak biting activity just before dawn.They can obtain their meal in as little as three minutes, after which they are engorged and drop off the host, then crawl into a hiding place to digest their meal. Bedbugs can live for 10 months, and can go weeks without feeding.
I'm a former scientist, using words and an audio recorder as my new research tools to untangle the health and food issues that matter most to consumers. I live in Brooklyn, N.Y., where I cook as much as possible. You can find me in the grocery aisle scrutinizing the fine print of every food item I put into my cart. Follow me on Twitter @juliacalderone.

Thus, although these insects usually cause mild cutaneous reactions, more severe responses, including anaphylaxis, may occur. [9] Bullae may be noted. Skin responses at bite sites may evolve from immediate, pruritic, edematous macules into bullae within 24 hours. Histopathologically, an urticarial-like reaction can develop into a leukocytoclastic vasculitis, sometimes with a destructive, necrotizing, eosinophil-rich vasculitis with prominent infiltration of CD68+ histiocytes and collagen necrobiosis.
Symptoms may not appear until some days after the bites have occurred.[5] Reactions often become more brisk after multiple bites due to possible sensitization to the salivary proteins of the bed bug.[3] The skin reaction usually occurs in the area of the bite which is most commonly the arms, shoulders and legs as they are more frequently exposed at night.[5] Numerous bites may lead to an erythematous rash or urticaria.[5]
Next, vacuum and steam along baseboards, window sills, and the edge of the carpet. When you’re done vacuuming, the bag or canister should be cleaned or discarded to limit exposure of bed bugs to other parts of the home. The steamer can also be used to treat sofas, chairs, furniture, and cabinets. When applying steam, remember to move the nozzle slowly (about one inch per second) to ensure that all bed bugs and eggs are killed.
Avoiding bed bugs is most challenging in hotels, apartment buildings, and other places where there are many people, high turnover and ongoing opportunities for introduction of the pests. Periodic, preventive inspection by tenants, housekeeping/maintenance staff, or pest control firms is the best way to detect infestations in their initial stages when they are easiest to control. Visual inspections can be supplemented by using various monitoring devices to capture and reveal bed bugs that may have been overlooked by occupants.   
Flat surfaces can be wiped with alcohol or sprayed with a bed bug—killing contact pesticide, but all items that have a small nook or cranny where bed bugs could hide (which is most stuff) need to be treated with penetrating fumes. Build yourself a kill chamber out of a large storage bin. Tape a pesticide strip to the side or lid of the bin, and seal your stuff inside for a couple days or however long the manufacturer recommends. Seal the lid of the bin with duct tape.
If at all possible, pull up the carpet where it meets the wall and puff powder around the whole perimeter of the room. Inside outlet boxes is a great place to use powders because sprays and electricity don’t mix. Bellow dusters work great for spreading residual insecticide powder. An old makeup brush is a good tool to spread the dust around on hard surfaces. Bed bug powders are available the same places you’ll find the spray pesticides.
Bed bug bites are caused primarily by two species of the insect Cimex: Cimex lectularius (the common bed bug) and Cimex hemipterus.[3] Their size ranges between 1 and 7 mm.[7] They spread by crawling between nearby locations or by being carried within personal items.[2] Infestation is rarely due to a lack of hygiene but is more common in high-density areas.[8][2] Diagnosis involves both finding the bugs and the occurrence of compatible symptoms.[5] Bed bugs spend much of their time in dark, hidden locations like mattress seams or cracks in the wall.[2]
Some pest control firms also employ commercial steamers or spot-freezing equipment to treat areas where bed bugs are found or suspected. Used correctly, they kill bugs and eggs on contact. Neither method, however, affords residual protection against bed bugs which may have been missed. Steaming and spot-freezing equipment also have limited ability to penetrate fabric, wood, and other materials where bed bugs often reside. 
We are often asked, "How do you kill bed bugs?" While we would love to give a simple answer, this is actually a loaded question. There are many ways to kill a bed bug but, if you want to kill all of the bed bugs in your home or business, it is important to pay attention to the details. Here are some ways you can kill bed bugs, and what you should know about each.
Especially in situations where a large amount of time would be required for a pest management professional to thoroughly inspect a structure, bed bug detecting dogs are sometimes employed. Well-trained and handled dogs can also be of value in structures or units with lesser infestations, i.e., where human inspectors might easily overlook bed bugs because only a few bugs are present.
Systematically treat the room–all cracks and crevices around windows, outlets, blinds, pictures, posters and clocks on walls, baseboards, under edges of carpets and any other crevices or void areas in the room. Remember that immature bed bugs are very tiny. Dozens of bed bugs can hide in a recessed screw hole in a bed frame or dresser. Therefore it’s important that no hiding place be overlooked. Treatment can include vacuuming, but should not be limited to vacuuming only. Vacuums do not remove eggs, and will likely not remove all bed bugs from deeply infested cracks and crevices. Vacuums can remove many bed bugs from mattresses and the exterior of box springs (remember to immediately double-bag the vacuum bag after cleaning and dispose of outside in a trash can or dumpster). Sticky tape is another method of picking up bed bugs from furniture, walls, etc.
Other types of bed bug traps include those that do not rely on humans as bait, but instead use CO2and/or other attractants. CO2 is thus far the most powerful lure for bed bugs, as it is the primary cue they follow to locate hosts. Traps that issue CO2 for a period of time are more expensive than Climbup™ traps, but can effectively trap bed bugs when no host is present, such as in common areas, vacant homes or units, offices, schools, and theaters. Thus they can help confirm infestation and eradication.

Caregivers, firefighters, and other service providers are sometimes required to enter and work in bed bug-infested dwellings. In doing so, there is the potential to transport some bugs home or to the workplace. It should be noted that bed bugs do not fly, nor jump onto people/pets as fleas do. During the day, bed bugs usually remain hidden and immobile, becoming more active at night when seeking a host. Consequently, the chance of picking up bed bugs by merely walking into an infested dwelling during the day is unlikely. The risk may increase while providing care but can be lessened by taking some precautions. 
The life cycle stages of a bed bug are egg, nymph, and adult. The reason they are called bed bugs is that they readily infest mattresses, bed frames and box springs. Eggs are laid along the edges of or around buttons on the mattresses. Eggs can also be glued to rough surfaces. Bed bug females lay about 200 eggs, usually at the rate of three or four a day. Eggs are placed in cracks, crevices and other isolated and protected shelters. Females lay eggs after a blood meal. Eggs will hatch in one or two weeks into Nymphs. Newly hatched bugs (Nymphs) begin feeding immediately. At room temperature, and with an available food supply, the nymphal period will last 14 to 30 days. They shed their skin (Instar) five times before becoming adults. Bed bugs will mate soon after becoming mature, so the time from egg hatch to egg laying is 4 to 9 weeks, under favorable conditions. The average life span of the bed bug is 6-12 months and they feed every 10 days or so during this time. Bed bugs can survive many months without a blood meal and their reproduction is high.
It is hard to tell if you’ve been bitten by a bed bug unless you find bed bugs or signs of infestation. When bed bugs bite, they inject an anesthetic and an anticoagulant that prevents a person from realizing they are being bitten. Most people do not realize they have been bitten until bite marks appear anywhere from one to several days after the initial bite. The bite marks are similar to that of a mosquito or a flea — a slightly swollen and red area that may itch and be irritating. The bite marks may be random or appear in a straight line. Other symptoms of bed bug bites include insomnia, anxiety, and skin problems that arise from profuse scratching of the bites.
Begin by reducing clutter in the room; things like clothes, books, and other personal belongings shouldn’t be left on the floor, as they make treatment more difficult and add hiding places for bed bugs and eggs. Seal those items in garbage bags and store them away from the room. Any clothing that was picked up or removed from dresser drawers should be dried on high heat for at least 45 minutes. Once treated, clothing that you don’t normally wear should be stored inside garbage bags outside of the infested room.
Use a Hand Bellow Duster to apply dusts into the cracks and crevices with the Cimexa Dust. Put dust into duster. Remove switch plates and electrical outlet covers and dust into the openings. Another tool used for dusting would be a small paint brush or small makeup brush. Apply a small amount of dust on the tip of the brush, brushing into cracks and crevices. Dust any items hanging on the wall such as pictures with a small paint brush. Use a small paint brush to paint dust in seams and around buttons of mattress. Use dust or aerosol in all joints of the bed frame.
Visit your doctor. You can also see a doctor for diagnosis if you do not find signs of bedbugs in your bed and cannot identify the source of the bites or rash. However, there is a very good chance that your physician will not be able to firmly diagnose that you have been bitten by a bedbug because the symptoms look so similar to those that result from other insect bites and skin conditions. Nevertheless, you may feel comforted by going to see your doctor, who can confirm for you that bedbugs pose little physical threat to humans.
Alternatively, place a bed bug proof mattress cover over an infested mattress to trap the bed bugs inside and starve them to death. This will eliminate the need to purchase a new mattress/boxspring and make treatment and future inspections easier. (Starving the bugs CAN take up to 400 days, so make sure your cover stays sealed for at least that long.)[6]

Some preparation is still required (e.g. removal of heat-sensitive items such as aerosol cans, indoor plants and medications), but it is seldom necessary to bag, launder and/or hot dry bedding and clothing since these items will be heated along with other furnishings. Another advantage of heat treatment is that infestations can often be eliminated in one day, rather than over multiple days or weeks. Conversely, heat treatment alone has no lasting (residual) effect should bed bugs be reintroduced into the dwelling. Consequently, some companies recommend concurrently applying residual insecticides. To further minimize reintroduction, occupants are advised to take as few belongings as possible with them while the heat treatment is in progress.    


Bed bugs have five immature nymph life stages and a final sexually mature adult stage.[13] They shed their skins through ecdysis at each stage, discarding their outer exoskeleton.[14] Newly hatched nymphs are translucent, lighter in color, and become browner as they moult and reach maturity. Bed bugs may be mistaken for other insects, such as booklice, small cockroaches, or carpet beetles; however, when warm and active, their movements are more ant-like, and like most other true bugs, they emit a characteristic disagreeable odor when crushed.
^ Kambu, Kabangu; Di Phanzu, N.; Coune, Claude; Wauters, Jean-Noël; Angenot, Luc (1982). "Contribution à l'étude des propriétés insecticides et chimiques d'Eucalyptus saligna du Zaïre (Contribution to the study of insecticide and chemical properties of Eucalyptus saligna from Zaire ( Congo))". Plantes Médicinales et Phytothérapie. 16 (1): 34–38. hdl:2268/14438.
"In the past, bedbugs have repeatedly shown the ability to develop resistance to products overly relied upon for their control. The findings of the current study also show similar trends in regard to chlorfenapyr and bifenthrin resistance development in bedbugs," study researcher Ameya Gondhalekar, research assistant professor at Purdue's Center for Urban and Industrial Pest Management, said in the Entomology Today statement. "With these findings in mind and from an insecticide resistance management perspective, both bifenthrin and chlorfenapyr should be integrated with other methods used for bed bug elimination in order to preserve their efficacy in the long term."

Although most furnishings need not be discarded, in some cases this may be necessary. This is especially true of heavily infested beds, sofas and recliners where bugs and eggs often reside in hard-to-reach places. Consequently, pest control firms may recommend such items be discarded, especially when in poor condition. When infested items are discarded, bagging or wrapping them prevents dislodgement of bugs en route to the trash. 
Bed bugs were mentioned in ancient Greece as early as 400 BC, and were later mentioned by Aristotle. Pliny's Natural History, first published circa AD 77 in Rome, claimed bed bugs had medicinal value in treating ailments such as snake bites and ear infections. (Belief in the medicinal use of bed bugs persisted until at least the 18th century, when Guettard recommended their use in the treatment of hysteria.[51])
Bedbug bites themselves are typically painless. However, the subsequent allergic reaction that may develop can cause intense pruritus. While feeding, bedbugs may inject one of several pharmacologically active substances, including hyaluronidase, proteases, and kinins. These compounds may induce different skin reactions, such as erythema, wheals, vesicles, or hemorrhagic nodules. Repeated bites may sensitize individuals, leading to more pronounced cutaneous manifestations or systemic hypersensitivity reactions. The local trauma from bedbug bites can lead to secondary bacterial infection, causing ecthyma, cellulitis, or lymphangitis. There is some evidence that bedbugs may also be a vector for hepatitis B and Chagas disease. Histologic findings from bite-site biopsy specimens typically show eosinophilic infiltrates, which are indicative of the allergic nature of the reaction. The image shown is papular urticaria, which may develop from bedbug bites.
Pay attention to when the bites occur. Consider, for example, if you notice the bites after waking up when previously you hadn't noticed them. However, this can also be difficult to determine because each person's reaction time can vary significantly. Symptoms that result from the bite can manifest at any point from a couple of hours to more than a week after the bite occurred. 

Bed bug sprays usually act as an insecticide and repellent. The best kind of bed bug sprays should kill bed bugs on contact and need to be used repeatedly to help eliminate your bug problem. According to the Texas A&M University, bed bug sprays are best used in combination with other bug control methods like natural bed bug powders. This is because bed bugs don’t build up resistance to natural bug powders and products like diatomaceous earth which kills bed bugs as long as the powder is dry.5
×