Bed bugs were once a common public health pest worldwide, but declined in incidence through the mid 20th century. However, bed bugs have undergone a dramatic, worldwide resurgence since they have now evolved resistance to common insecticides.[1] Bed bugs are one of the great travelers of the world and are readily transported via luggage, clothing, bedding, and furniture. To get rid of bed bugs, act at the first signs of infestation and use an integrated pest management approach involving prevention, sanitation, and chemical treatment. Bed bugs can be persistent, so you'll need to demonstrate a greater level of persistence if you want to eliminate them.

Systematically treat the room–all cracks and crevices around windows, outlets, blinds, pictures, posters and clocks on walls, baseboards, under edges of carpets and any other crevices or void areas in the room. Remember that immature bed bugs are very tiny. Dozens of bed bugs can hide in a recessed screw hole in a bed frame or dresser. Therefore it’s important that no hiding place be overlooked. Treatment can include vacuuming, but should not be limited to vacuuming only. Vacuums do not remove eggs, and will likely not remove all bed bugs from deeply infested cracks and crevices. Vacuums can remove many bed bugs from mattresses and the exterior of box springs (remember to immediately double-bag the vacuum bag after cleaning and dispose of outside in a trash can or dumpster). Sticky tape is another method of picking up bed bugs from furniture, walls, etc.
Minimize its spread. First, notify your landlord if you rent in a building to control its spread to other units. Thoroughly vacuum any infested areas, including carpets and mattresses, and then empty the vacuum bag into a plastic bag, seal it, and throw it in the trash outside. If you can’t get the bed bugs out of your furniture, discard items in a responsible manner. To avoid someone else from salvaging infested furniture or mattreses, rip, remove stuffing, or spray paint with the words “bed bugs.”
Bedbugs are highly resistant to many sprays. There are, however, certain sprays that may be able to kill bedbugs. Check with a professional exterminator about advice using sprays to try and remove the bedbugs yourself. Dead bedbugs usually won't move, may be arched back, or red in color. Ultimately, you may be better off replacing your mattress and bedding and fumigating your home to kill the bedbugs. 

It was stated in 2012 that no truly effective insecticides were available.[6] Insecticides that have historically been found effective include pyrethroids, dichlorvos, and malathion.[4] Resistance to pesticides has increased significantly over time, and harm to health from their use is of concern.[3] The carbamate insecticide propoxur is highly toxic to bed bugs, but it has potential toxicity to children exposed to it, and the US Environmental Protection Agency has been reluctant to approve it for indoor use.[33] Boric acid, occasionally applied as a safe indoor insecticide, is not effective against bed bugs[34] because they do not groom.[35]
Bedbugs are a species of insect known as cimex lectularius (literallycimex is Latin for bug and lactularius is Latin for bed). There is a second common species of bedbugs known as cimex hemiptera. These are known as the tropical bedbugs, staying within 30 degrees of the equator. There are published reports, many without supporting evidence, that each of the common bedbug species has chemically different saliva. Some researchers, however, have found no difference in the reactions caused by each species.
Bed bugs are challenging to eradicate. Since they can hide in so many places, inspections must be thorough and elimination is not always a certainty. Whenever resources allow, it’s prudent to enlist the services of a professional. Experienced pest controllers know where to look for bed bugs, and have an assortment of tools at their disposal. Nonetheless, owners and occupants can assist the professional in several important ways. Affording access to all living areas is crucial, and excess clutter will need to be removed. Belongings strewn about rooms offer many places for the bugs to hide, and impede inspection and treatment. Since bed bugs can disperse throughout a building, it often will be necessary to inspect adjoining rooms and apartments as well. 

You’ll likely only see them in their hiding spots or crawling across the floor since, unlike other insects, bedbugs cannot fly or jump. Durham says to check along the edges of your mattress. You may see the exoskeletons that bedbugs have shed as they matured, or you may notice a musty smell, both of which indicate there could be bedbugs in the area. It can also be helpful to check your bed with a flashlight during the middle of the night (since these crawlers tend to be more active at night.)
Avoiding bed bugs is most challenging in hotels, apartment buildings, and other places where there are many people, high turnover and ongoing opportunities for introduction of the pests. Periodic, preventive inspection by tenants, housekeeping/maintenance staff, or pest control firms is the best way to detect infestations in their initial stages when they are easiest to control. Visual inspections can be supplemented by using various monitoring devices to capture and reveal bed bugs that may have been overlooked by occupants.   
Unfortunately standard insect monitors (“sticky traps”) are not very good at trapping bed bugs. To date, the best bed bug trap as measured by cost, ease of use, and effectiveness, is the “Climbup™ Insect Interceptor.” This trap resembles a plastic dish and is placed beneath the legs of beds and other furniture on which persons might relax and serve as “bait” for bed bugs. Bed bugs that climb into the dish are unable to climb its slippery inner surface (which is coated with talcum powder). Studies have shown that even inspections performed by trained and experienced pest management professionals often miss some bed bugs, especially in heavier infestations, and that bed leg traps can catch many of those missed bed bugs.

I'm a former scientist, using words and an audio recorder as my new research tools to untangle the health and food issues that matter most to consumers. I live in Brooklyn, N.Y., where I cook as much as possible. You can find me in the grocery aisle scrutinizing the fine print of every food item I put into my cart. Follow me on Twitter @juliacalderone.


Dogs have been sniffing out insects such as termites for many years, and are now being used as inspection tools for bed bug detection. But while companies using dogs may advertise them as being highly accurate in finding bed bugs, one should not get the impression that dogs are infallible or that they are in all ways superior to human inspectors. Research on the effectiveness of dogs as bed bug detectors suggests that for those who would employ dogs, the message is buyer beware. There appears to be great variance in the accuracy of bed bug dogs, and even well-trained dogs are subject to missing bed bugs and to giving “false positives” (signaling the presence of bed bugs where there are none).


Prior to World War II, bed bug infestations were common. Since the development of synthetic organic insecticides such as DDT and chlordane almost 70 years ago, bed bug infestations in buildings have declined significantly - almost disappeared. In fact, in the United States, bed bug infestations have been exceedingly rare - almost non-existent - until a few years ago.
One method of applying freezing temperatures to bed bugs entails the use of carbon dioxide (CO2) applied as “snow” with a portable application device, i.e., Cryonite™. When applied directly onto bed bugs, the frozen CO2 will kill them. However, this method is similar to using contact pesticides, that is, there is no residual activity. It can kill only as many bed bugs as the applicator can find. The advantage of using this type of freezing device is that bed bugs may be killed quickly and without the use of more hazardous pesticides. Again, this is not a stand-alone treatment, and it is recommended that it be used as a supplemental to the application of residual pesticides and/or other means of control.
^ Johann Friedrich Wolff; Johann Philip Wolff. "According to Scopoli's 2nd work (loc. cit.), found in Carniola and adjoining regions. According to Linnaeus' second work on exotic insects (loc. cit.), before the era of health, already in Europe, seldom observed in England before 1670". Icones Cimicum descriptionibus illustratae. p. 127. Retrieved 1 December 2016. fourth fascicle (1804)

The main reason people seem to favor the essential oil option is that it’s considered a natural and chemical-free alternative to pesticide sprays. What they don’t realize is that today’s home pesticides are carefully regulated by the EPA to make sure that they’re safe for indoor use. The EPA also requires that health and safety guidelines are included in the product label and MSDS, to ensure that anyone who uses a spray has instructions on how to use it safely and effectively. When used correctly, even our strongest bed bug sprays won’t have any effect on you, but they will kill bed bugs more effectively than any mixture of household items like herbs or oils.

Bed bugs occur in all regions of the globe.[7] Rates of infestations are relatively common, following an increase since the 1990s.[3][4][6] The exact causes of this increase is unclear; with proposals including greater travel, more frequent exchange of second-hand furnishings, a greater focus on control of other pests, and increasing resistance to pesticides.[4] Bed bugs have been known human parasites for thousands of years.[2]
Successful control of bed bugs often depends on thorough inspection of the premises believed to be infested. Finding no insects identified as bed bugs does not mean that bed bugs are not present. It can mean that the inspection was inadequate, or that bed bugs are present but so few in number that the inspector missed them. It is not uncommon for even the most diligent and experienced inspectors to fail to find all of the bed bugs present in a structure.
Bed bugs tend to live in clusters similar to German cockroaches. Adult bed bugs generally travel 15 to 20 feet, or less, from their harborage sites. Common bed bugs feed on human blood just below the surface of the skin with their piercing-sucking mouthparts. Those bitten by a bed bug may develop small, white to red, hard welts at the bite site. These bites itch intensely.
Vinegar can kill bed bugs if it comes into direct contact with them and it may help repel them from areas where it is sprayed. However, vinegar cannot be your only defense against bedbugs. For one, vinegar only works if you can see the bugs, and often they will hide or even just be too small to see easily. Second, vinegar will not kill bedbug eggs, which means that vinegar alone will never stop an infestation. Vinegar also needs to be reapplied frequently to have any effectiveness.
While the former methods are helpful, insecticides are widely used by most pest control companies. A variety of EPA-registered materials are available formulated as liquids, dusts and aerosols. Baits used to control ants and cockroaches are ineffective in this case since bed bugs must bite and feed on blood. Professional-use insecticides such as Temprid®, Transport® and Phantom® tend to be more effective than bed bug sprays sold by retailers. Bleach, alcohol, cigarette lighters, etc. should NOT be used to control bed bugs. Besides being ineffective, such actions can result in fires and other dangerous outcomes.   
Dust the wall voids. Bed bugs can often travel from room to room, especially in apartments, hotels and condo's. They travel along electrical wiring and plumbing lines. Specifically treat wall voids with a hand duster either by removing wall switch plate covers and/or drill access holes discreetly between studs. Cimexa Dust or Delta Dust are excellent choices for void applications. It kills populations in walls and voids and creates a repellent, hostile environment which reduces the likelihood of bed bugs traveling through voids to other areas. Use a small hand type duster to "puff" insecticidal dusts into these areas. A light coating is all that is needed. To much dust and the bed bugs will just crawl around it.
Spectre 2 SC has a low odor and is not dectectable by the bed bugs. Adjust the spray pattern to a mist by turning the nozzle. A low fine mist is best for most spraying, but you may need to use a stream to get into some cracks and crevices. If you can't get into the cracks and crevices use one of the aerosols described below with it's crack and crevice tips to reach into these areas.
Some pest control firms also employ commercial steamers or spot-freezing equipment to treat areas where bed bugs are found or suspected. Used correctly, they kill bugs and eggs on contact. Neither method, however, affords residual protection against bed bugs which may have been missed. Steaming and spot-freezing equipment also have limited ability to penetrate fabric, wood, and other materials where bed bugs often reside. 
A flashlight:  Bed bugs hide in dark areas and in cracks and crevices.  Bed bugs are a dark red to brown color, but they can be light brown if they haven’t been feeding. This makes it very hard to see them. When hunting for bed bugs hold your flashlight parallel to the surface being inspected, this will cause eggs and small bed bugs to cast a shadow, making them easier to find. 

Bedbugs do, however, have a unique bite pattern. Although some bites may appear alone, most bites occur in a row of three to five bites (termed "breakfast, lunch, and dinner") or in a cluster of red bumps (a rash called bedbug dermatitis). The bites often appear in a zig-zag formation, but may appear in a straight line if the bugs bite you in the morning.
2. Active Guard Liners: Active Guard Mattress Liners may be placed on beds and are effective as both preventative and active bed bug treatments. They kill bed bugs and dust mites within 72 hours and will prevent bed bugs from infesting mattresses. ActiveGuard Liners act like a fitted sheet; it comes in single, full, queen, and king sizes that fit up to 17" in depth.
Bed bug bites are caused primarily by two species of the insect Cimex: Cimex lectularius (the common bed bug) and Cimex hemipterus.[3] Their size ranges between 1 and 7 mm.[7] They spread by crawling between nearby locations or by being carried within personal items.[2] Infestation is rarely due to a lack of hygiene but is more common in high-density areas.[8][2] Diagnosis involves both finding the bugs and the occurrence of compatible symptoms.[5] Bed bugs spend much of their time in dark, hidden locations like mattress seams or cracks in the wall.[2]
Amazingly, these sneaky little bloodsuckers dine on you without waking you. You don't feel their stealthy bite because they inject a numbing agent into your body, along with an anticoagulant to keep your blood flowing as they suck. The first sign of bedbugs may be itchy, red bites on the skin, usually on the arms or shoulders. Bedbugs tend to leave straight rows of bites.
Doctors often misdiagnose those afflicted because it is nearly impossible to tell, if you are experiencing an allergic reaction, what bit you. Often healthcare providers and individuals that have been bitten by a member of the Hemiptera order mistake bites for those of a mosquito. The only way to discern, with complete surety, what your bites are from, is to get a sample of what has bitten you.
Nightstands and dressers may need to be emptied and examined inside and out, and tipped over to inspect the woodwork underneath. Oftentimes the bugs will be hiding in cracks, corners, and recesses. Other common bed bug hiding places include: along and under the edge of wall-to-wall carpeting, especially behind beds and sofas; cracks in wood molding; ceiling-wall junctures; behind wall-mounted pictures, mirrors, outlets and switch plates; under loose wallpaper; clothing and clutter within closets; and inside clocks, phones, televisions and smoke detectors.
Mix 8 ml (about 1/3 oz)(measurements on the bottle) or one 8 ml vial of Temprid FX with one gallon of water. Remember to use what you mix-within 24 hours. Adjust the spray pattern to a mist by turning the nozzle. A low fine mist is best for most spraying, but you may need to use a stream to get into some cracks and crevices. If you can't get into the cracks and crevices use one of the aerosols described below with it's crack and crevice tips to reach into these areas.
People don't often consider bed bugs until they've left their mark. The appearance of flat, red welts in zigzag lines or small clusters is a key sign of bed bugs on humans. Bed bugs can also leave their bites in straight rows and, while they don't spread diseases to humans, their bites are quite irritating and scratching them can lead to bleeding and infection. 
×