Use of Organic-Based Bed Bug Spray – thanks to growing going green trend, there are now bed bug products made with natural ingredients. With them, you could now get rid of the crawlies safely, easily and inexpensively. However, you should take note that this method only works if you have the best-selling bed bug spray that kills on contact and is without harsh chemical ingredients.
We recommend spraying Steri-Fab in areas where live bed bugs are visible. Steri-Fab combines a synthetic pyrethroid insecticide and isopropyl alcohol to kill bed bugs fast on contact. Steri-Fab also acts as a sanitizer. Steri-Fab does not leave any residual, meaning it can be applied virtually anywhere. Simply shake well, then apply to desired treatment areas. Insect mortality is imminent, generally within 10 minutes of spraying.
Successful control of bed bugs often depends on thorough inspection of the premises believed to be infested. Finding no insects identified as bed bugs does not mean that bed bugs are not present. It can mean that the inspection was inadequate, or that bed bugs are present but so few in number that the inspector missed them. It is not uncommon for even the most diligent and experienced inspectors to fail to find all of the bed bugs present in a structure.
Unfortunately standard insect monitors (“sticky traps”) are not very good at trapping bed bugs. To date, the best bed bug trap as measured by cost, ease of use, and effectiveness, is the “Climbup™ Insect Interceptor.” This trap resembles a plastic dish and is placed beneath the legs of beds and other furniture on which persons might relax and serve as “bait” for bed bugs. Bed bugs that climb into the dish are unable to climb its slippery inner surface (which is coated with talcum powder). Studies have shown that even inspections performed by trained and experienced pest management professionals often miss some bed bugs, especially in heavier infestations, and that bed leg traps can catch many of those missed bed bugs.
Bed bugs are tiny, flat, wingless insects that range in color from nearly white to deep brown/reddish. The parasitic pests get their name from their hiding spot of choice – they prefer burrowing into bed frames and mattresses during the day, then become active at night when they feed on people and pets. Bed bugs are resilient pests that can hitch a ride on luggage, furniture, storage boxes, backpacks and clothing (but rarely humans), very quickly causing an infestation.

Inspection requires knowledge, dedication and time. At minimum an inspection should involve a detailed examination of mattresses, box springs and bed frames, as well as likely hiding places for bed bugs within 20 feet of beds and other places where residents may sleep or rest, e.g., on couches). Clutter-free space will be needed to allow furnishings to be moved and manipulated for inspection. In general, rooms with more furnishings will take more time to inspect.

Next, apply a bed bug powder into confined areas where it won’t be stirred up into the air. Places like the edges of carpeting, inside deep cracks and wall voids, and inside electrical outlets and light switches (accessed by removing the faceplate with a screwdriver) are good candidates for powders, as sprays can’t reach into these areas quite as well. We recommend using a professional powder applicator, which offers better control when applying the powder.
First off you should ALWAYS go to pest control if you think you have bedbugs! You shouldn’t try and get rid of them yourself, 99% of the time it does not work. Plus even if you removed infected areas and wash them it wouldn’t kill the eggs. Plus bedbugs are very easy to get but very hard to get rid of. So you should never do it yourself it won’t work!
1. Mattress Safe Encasements: Mattress Safe Products are bed encasements to place over your mattress or boxspring so you don't have to throw them away. They are bedbug certified. If using a labeled insecticide on the mattress or boxspring first, apply on mattress or box springs then zip it up. It has a patented hook to keep the bed bugs inside the encasement so they cannot escape. Keep the encasement in place for one year (due to bed bug life cycles).
I paid $1200 for extermination heat treatment- lasted a few months and they are back- bought all new furniture! Still bugs- spray bye bye bugs spray which kills on contact but didn’t stop the infestation! This is going on 2 years now!!!! Mainly they are just in the 2 bedrooms. Ours and one that hardly no one sleeps in. But when grandkids come- they get bitten bad- I scrub, spray, vacuum & steam clean, & wash all bedding n still bit!!! Ready to burn the house down!!! HELP!!!!!! Can’t afford another $1200
While cleaning up infested areas will be helpful in controlling bedbugs, getting rid of them usually requires chemical treatments. Because treating your bed and bedroom with insecticides can be harmful, it is important to use products that can be used safely in bedrooms. Do not treat mattresses and bedding unless the label specifically says you can use them on bedding.

Fumigation using a penetrating gas is another way to de-infest dwellings or furnishings, but the procedure is only offered by certain companies. True fumigation is not the same as setting off a total release fogger or ‘bug bomb.’ (It should be noted that bug bombs are considered ineffective in the treatment of bed bugs, and can be quite dangerous if misused.) The fumigation process is technically complex and requires vacating the building for a period of days. The building is then sealed and injected with a lethal gas, usually sulfuryl fluoride. Because the entire building must be vacated, structural fumigation is logistically more challenging with multi-unit buildings such as apartments, than for single family homes. Bed bug fumigations tend to be more common in southern and western states, where the procedure is also used to control certain types of wood-dwelling termites.  

Fumigation using a penetrating gas is another way to de-infest dwellings or furnishings, but the procedure is only offered by certain companies. True fumigation is not the same as setting off a total release fogger or ‘bug bomb.’ (It should be noted that bug bombs are considered ineffective in the treatment of bed bugs, and can be quite dangerous if misused.) The fumigation process is technically complex and requires vacating the building for a period of days. The building is then sealed and injected with a lethal gas, usually sulfuryl fluoride. Because the entire building must be vacated, structural fumigation is logistically more challenging with multi-unit buildings such as apartments, than for single family homes. Bed bug fumigations tend to be more common in southern and western states, where the procedure is also used to control certain types of wood-dwelling termites.  


Pay attention to when the bites occur. Consider, for example, if you notice the bites after waking up when previously you hadn't noticed them. However, this can also be difficult to determine because each person's reaction time can vary significantly. Symptoms that result from the bite can manifest at any point from a couple of hours to more than a week after the bite occurred.

If you arrive home and discover that you have brought some unwanted guests home with you, immediately notify the hotel of your discovery. Having a possible infestation in hotels and motels can be a public relations nightmare for the owners. Politely ask them to pay for any and all costs incurred to rid your clothing and home of a possible new infestation. 

Mattress Encasements:  Mattress encasements are large “fabric bags” that you place a mattress inside. Once zippered closed, any surviving bed bugs will eventually starve. You will need an encasement for each mattress and box-spring in your home. If there are bed bugs in your mattress or box-spring they will start to die within two weeks, inside an encasement, but encasements should be left on for at least a year.There are many types of encasements so it is important to make sure you use an encasement designed for bed bug control. 
Bedbugs lurk in cracks and crevices and they've been living on human blood for centuries. Though they aren't known to transmit disease or pose any serious medical risk, the stubborn parasites can leave itchy and unsightly bites. However, bedbugs don't always leave marks. The best way to tell if you have a bedbug infestation is to see the live, apple-seed-size critters for yourself. Unfortunately, once bedbugs take up residence in homes and businesses, they can be difficult to exterminate without professional help.
Some firms want beds stripped and furniture moved before they arrive, while other firms prefer to inspect first and perform these tasks themselves. Clutter and belongings on floors (especially beneath beds) must be removed since they impede treatment and afford additional places for bugs to hide. Bedding and garments normally will need to be laundered and/or hot dried (120°F minimum) since they cannot be treated with insecticides. An effective and efficient alternative to laundering is to simply place bedding, clothing, toys, shoes, backpacks, etc., in a clothes dryer set at medium-to-high heat for 10 to 20 minutes. This can be done in lieu of washing and will kill all bed bug life stages. 
Some bed bug products cannot be used where others can. Also, bed bugs can build up a resistance to certain pyrethroids, making them difficult to treat. This is why using a variety of products to kill and control bed bugs will produce the best results. We recommend using one of our bed bug kits. These kits include our most powerful and effective products for a variety of applications to save you time and money.
Inspection requires knowledge, dedication and time. At minimum an inspection should involve a detailed examination of mattresses, box springs and bed frames, as well as likely hiding places for bed bugs within 20 feet of beds and other places where residents may sleep or rest, e.g., on couches). Clutter-free space will be needed to allow furnishings to be moved and manipulated for inspection. In general, rooms with more furnishings will take more time to inspect.
Dust every crack and crevice. Every crack and crevice, electrical switch plate, wall switch - EVERYTHING - within 10 to 15 feet of the bed should be treated, particularly those closest to the bed. Use the "running method" of moving the application tip along the length of the crack. Look for cracks from the ground level to the ceiling as you treat each section of the room. Use Cimexa Dust or Delta Dust. If you make a mess, simply wipe it up. To much insecticide is better than too little for bed bug control.
Some bed bug species are parasites of bats or birds, and may bite people if the wild hosts are no longer available. Although similar in overall appearance, the species of bed bugs that normally feed on bats, swallows, chimney swifts, pigeons or other wild hosts can be differentiated from those that prefer humans. Entomologists and knowledgeable pest managers can make this determination. If bat bugs or bird bugs are present, roosting and nesting sites should be the primary focus, and the animals should be removed and excluded from the building. 
×