Blood spots found on one's sheets, bites and the presence of bed bug feces and cast skins are some of the indications of a bed bug infestation. Bites are commonly found on the parts of the body that are more likely to be exposed to bed bugs during sleep - the hands, neck, face, shoulders, legs and arms. While not always the case, bed bug bites are often grouped together in a small area and at times may occur in a line or a zigzag pattern. Bites normally look like small, flat or raised areas that may become inflamed, itchy, red or blistered. Bed bug bite reactions don’t always appear immediately after you’re bitten and may take a few days to begin causing symptoms. However, not everyone reacts to bed bug bites in the same manner.
Please be sure to read the product label of any insecticide you choose to use to get information on the personal protective safety gear you will need. In most situations, it is recommended that you wear long pants, a long sleeved shirt, closed toe shoes with socks, chemical resistant gloves, and goggles. In areas where ventilation is poor, a manufacturer may recommend you wear a mask or a respirator. We have put together two different safety kits that will make selecting the correct safety gear easier for you.
^ Kambu, Kabangu; Di Phanzu, N.; Coune, Claude; Wauters, Jean-Noël; Angenot, Luc (1982). "Contribution à l'étude des propriétés insecticides et chimiques d'Eucalyptus saligna du Zaïre (Contribution to the study of insecticide and chemical properties of Eucalyptus saligna from Zaire ( Congo))". Plantes Médicinales et Phytothérapie. 16 (1): 34–38. hdl:2268/14438.
Insecticides are an effective way to eradicate bed bugs, but not the only way. If you or someone in your house is highly sensitive to chemicals, or you’re just not crazy about the idea of spraying chemicals where you sleep, kill the little blood suckers with heat. Temperatures above 120 degrees F kill all stages of bed bugs. Steamers can be used to treat all the same areas where you would have sprayed contact killers. Steamers like the one shown at (top) cost about $150 and are good for many other projects like removing wallpaper, cleaning tile, removing labels, cleaning engine parts and removing wrinkles from fabric.

Bed bugs have five immature nymph life stages and a final sexually mature adult stage.[13] They shed their skins through ecdysis at each stage, discarding their outer exoskeleton.[14] Newly hatched nymphs are translucent, lighter in color, and become browner as they moult and reach maturity. Bed bugs may be mistaken for other insects, such as booklice, small cockroaches, or carpet beetles; however, when warm and active, their movements are more ant-like, and like most other true bugs, they emit a characteristic disagreeable odor when crushed.
Alternatively, place a bed bug proof mattress cover over an infested mattress to trap the bed bugs inside and starve them to death. This will eliminate the need to purchase a new mattress/boxspring and make treatment and future inspections easier. (Starving the bugs CAN take up to 400 days, so make sure your cover stays sealed for at least that long.)[6]

Isolating your bed from the rest of the house.  If you don’t use a bed, purchase a frame that gets your mattress off the floor and install bed bug interceptors under all feet of the bed frame to keep bed bugs off your bed while you are sleeping. Interceptors are special platforms or cups that are purchased to prevent bed bugs from climbing on to your bed.  An interceptor can be as simple as a sticky card placed under a bed post (sticky and messy).  Better are one of the commercial pitfall traps made specifically for this purpose.  The Climbup™ Bed bug Interceptor and BlackOut BedBug Detector (Google them) are two such products sold online. Relatively inexpensive, these cups trap bed bugs attempting to climb (or exit) the bed. If you have encased your bedding, treated your bed frame thoroughly and installed interceptors, you will be instantly protected against bed bugs.  Don’t take out your clean bedding or put it back on the bed until the bed has been treated (and dried) and encasements installed. And note that for this method to be effective, beds and bedding must not touch the floor, furniture or walls.  This would provide bed bugs other ways to climb onto the bed and foil your defenses.


I was at a motel for a week, and had no problems with bed bugs. I then left to go to a shelter, because I had no more money to pay for a motel. The second day I went job searching all day, and started itching really bad on the back of my neck. At first I thought it was from the heat, and from me sweating. I then looked at my neck and noticed red swelling bites on my neck, and I scratched it to make the itch go away. I then noticed as the day progressed that it was spreading fast up the back of my neck. Now I’m getting worried, what is this, and why is it itching and spreading so fat. I asked the shelter workers what they thought it was and they said, I don’t know, but you can take anti-itching cream. I took the cream and put it on my neck, the itching went away, but the bites still were there. The next day I wake up and I have another bite on my upper right arm, and a bite on my right thumb. That night I talked to a resident staying there, and she said you have bed bug bites. I was so disgusted and scared. She then told me that three other people had the same problem I did, with the red bumps on their neck too, and they had left because of it. I want your advice on if I should persue legal action. Thank YoU
They also have the ability to travel beyond the bedroom, so all adjoining rooms should be checked for infestation. Any area that offers a layer of protection, e.g. dark, isolated areas, should be checked. They do leave excrement droppings behind, so even if they are not seen, you can often see where they have been. The best method to find them is to check only at night, and with a red light.
Alcohol will kill bed bugs but not their eggs and will need to be used often to control infestation. It is not an effective way to get rid of bed bugs permanently. If you want to use this bed bug treatment you need to mix nine parts 91 percent isopropyl (rubbing) alcohol with one part water. Place the solution in a chemical sprayer to cover large areas. Use a spray bottle for small areas and to get into crevices. Spray all areas including head/foot boards, hard surfaces, base boards, door jams and any other bed bug hiding spots.
If you need to treat items that can’t be laundered or steamed, you can use a portable bed bug heater, like a ZappBug Oven or a ThermalStrike Ranger. These heaters can safely treat household items like books, papers, CDs, and dry clean only clothing. Not only are bed bug heaters an effective part of a bed bug treatment process, but they’re one of the most popular prevention tools on the market. When you come home from a trip, just put your suitcase in the heater, zip it shut, and turn it on. In just a few hours, any bed bugs or eggs hiding in your belongings will be dead.
Some oils like tea tree and neem oil can't kill bedbugs, but they work well to repel them. Tea tree oil is an extract from the Melaleuca alternifolia plant—it can cause various health problems with pet birds, cats, and small dogs. If there are pets in the house, look for other safer choices. If you use the oil, apply it in small quantities to the skin to repel bed bugs. Since bed bugs are active at night, apply it before bedtime.
We use cookies and similar technologies to improve your browsing experience, personalize content and offers, show targeted ads, analyze traffic, and better understand you. We may share your information with third-party partners for marketing purposes. To learn more and make choices about data use, visit our Advertising Policy and Privacy Policy. By clicking “Accept and Continue” below, (1) you consent to these activities unless and until you withdraw your consent using our rights request form, and (2) you consent to allow your data to be transferred, processed, and stored in the United States.
Use a Hand Bellow Duster to apply dusts into the cracks and crevices with the Cimexa Dust. Put dust into duster. Remove switch plates and electrical outlet covers and dust into the openings. Another tool used for dusting would be a small paint brush or small makeup brush. Apply a small amount of dust on the tip of the brush, brushing into cracks and crevices. Dust any items hanging on the wall such as pictures with a small paint brush. Use a small paint brush to paint dust in seams and around buttons of mattress. Use dust or aerosol in all joints of the bed frame.
Consider using insecticides. Residual insecticides (usually pyrethroids) are applied as spot treatments to cracks and crevices where bed bugs are hiding. Increased penetration of the insecticide into cracks and crevices can be achieved if accumulated dirt and debris are first removed using a vacuum cleaner. Many readily available aerosol pesticide sprays will cause bed bugs to scatter making eradication more difficult. Dust formulations may be used to treat wall voids and attics.[16]
Please be sure to read the product label of any insecticide you choose to use to get information on the personal protective safety gear you will need. In most situations, it is recommended that you wear long pants, a long sleeved shirt, closed toe shoes with socks, chemical resistant gloves, and goggles. In areas where ventilation is poor, a manufacturer may recommend you wear a mask or a respirator. We have put together two different safety kits that will make selecting the correct safety gear easier for you.
Pest management professionals are increasingly looking to heat to control bed bugs. Whole houses and, in some cases, multi-unit structures are heated to temperatures well above those lethal to bed bugs, to help assure uniform heating of household contents. Rooms must be heated for several hours during which bulky contents are turned to help ensure heat penetration deep enough to kill bed bugs hiding inside.
Once the mattress and box spring are dry, encase them in sealed bed bug encasements. Encasements are crucial, as they prevent bed bugs from entering or escaping the mattress and box spring, cutting off key hiding places. Remember to leave the encasements on for at least 18 months to ensure that any bed bugs already inside have starved to death. Once the encasements have been applied, you can put your mattress and box springs back on your treated bed frame, and put your laundered bedding back on your bed. 

First off you should ALWAYS go to pest control if you think you have bedbugs! You shouldn’t try and get rid of them yourself, 99% of the time it does not work. Plus even if you removed infected areas and wash them it wouldn’t kill the eggs. Plus bedbugs are very easy to get but very hard to get rid of. So you should never do it yourself it won’t work!
While the mattress and box spring are left to dry, spray down the joints of the bed frame, headboard, and footboard with a contact spray and residual spray. The contact spray will kill bed bugs quickly and then evaporate, while the residual spray will kill bed bugs over several weeks. Remember to follow the sprays’ product labels and MSDS for safe and effective usage.
Bring in only what is needed, and avoid sitting or placing coats and other items on beds, floors and sofas where the bugs commonly reside. Essential items can be placed on a tabletop or other hard surface, preferably away from bedrooms and sleeping areas. Better to sit on a hard (non-upholstered) chair than on sofas and recliners. Also try to avoid leaning or brushing against beds and upholstered furniture. If such items are carried out of infested dwellings (e.g., by sanitation workers or firefighters), it’s best to wrap them in plastic or at least not hold them against your body during transport. Emergency Medical (EMS) personnel may need to take additional precautions, such as removing a patient’s bed bug-infested shoes or clothing, or installing plastic sheeting before transporting them in the emergency vehicle.    
×