Don't assume your bites are bedbugs. Bites can be hard to identify, even for doctors. Rule out mosquitoes, fleas, mites, and biting gnats by conducting a visual inspection. It's best to collect and identify bedbugs to confirm bites. Look for the bugs themselves or their bloodstains, especially along the seams of mattresses. Further, look for dark spots of insect waste where bedbugs might crawl into hiding places on furniture, walls, and floors.
Because bed bugs have become so prevalent in the past few years, many fear they’ll be their next victim. They became so anxious and paranoid of the possible bed bug presence. If you eliminate the pests though, you could have a certain sense of peace knowing that you would not be bothered or bitten them. However, you wouldn’t be able to sleep well for long if you would not kill bed bugs right and continuously do the bed bug preventive steps.
Waking up with bites might be the first indicator that you have a bed bug problem. Their bites are often arranged in lines or clusters on the face, neck, arms or hands. Where there are bed bugs in large numbers, you might smell a sweet, musty odor (from the bugs’ scent glands) or see rust-colored spots on your bedding or mattress caused by bed bug blood or excrement. If you look closely, you might see adult bed bugs themselves, usually in mattress folds or seams or on the wall behind the headboard. Bed bugs prefer to stay close to their food source and are typically found hiding out within 1 to 5 ft of infested beds or furniture.

Treat mattress box spring and furniture voids with Cimexa Dust or Delta Dust. Turn bed box springs over and remove the cloth cover seal. Thoroughly inspect and treat the box springs area with insecticidal dust. After treatment replace the cloth cover seal with staples or screws. Hollow bed-frames, platforms, headboards and any other voids discovered during inspection should also be treated where possible. The upper mattress can be sprayed and treated with Bedlam Plus, Zenprox or Sterifab.
Start with the bed, including mattress, box-spring and bed frame. Inspect the visible areas first. Look along all edges and corners.  Also check along all stitch lines and the mattress label. Five sides the mattress can be checked while the mattress is on the bed.  When you are finished checking the upper surfaces, you can then stand the mattress upright so you can check the bottom of the mattress.
A flashlight:  Bed bugs hide in dark areas and in cracks and crevices.  Bed bugs are a dark red to brown color, but they can be light brown if they haven’t been feeding. This makes it very hard to see them. When hunting for bed bugs hold your flashlight parallel to the surface being inspected, this will cause eggs and small bed bugs to cast a shadow, making them easier to find.
Flat surfaces can be wiped with alcohol or sprayed with a bed bug—killing contact pesticide, but all items that have a small nook or cranny where bed bugs could hide (which is most stuff) need to be treated with penetrating fumes. Build yourself a kill chamber out of a large storage bin. Tape a pesticide strip to the side or lid of the bin, and seal your stuff inside for a couple days or however long the manufacturer recommends. Seal the lid of the bin with duct tape.

As for traps, these capture methods may not be full-proof for all bedbug species. Researchers have found that while both the common and tropical bedbug species have hairy feet, C. hemipterushas denser foot hairs, making this tropical insect an expert climber on slick surfaces. In the study, detailed on March 15, 2017, in the Journal of Economic Entomology, the researchers found that adult tropical bedbugs were much better at escaping traditional pitfall traps, which held onto most of the common bedbugs in the study.
At room temperature, bed bugs can survive for up to 3 months without feeding. So, even if no one is living in the room, bed bugs can still survive, especially if there is enough moisture in the air. However, to get rid of bed bugs effectively, you should not just rely on bed bug sprays for exterminating the pests, you should have an integrated pest control management program. This includes using various methods for bed bug removal.
Just to be clear, you can kill bed bugs with heat. It’s just a matter of using the right equipment. A high-pressure steamer is the weapon of choice for killing bed bugs on contact, since their steam can surpass 200 degrees, and can penetrate deep into soft materials like mattresses and upholstered furniture. You can also use a steamer on more than just clothes or other fabrics; a steamer can kill bed bugs hiding along baseboards, floorboards, window sills, door frames, and the edges of the carpet.
Bedbugs lurk in cracks and crevices and they've been living on human blood for centuries. Though they aren't known to transmit disease or pose any serious medical risk, the stubborn parasites can leave itchy and unsightly bites. However, bedbugs don't always leave marks. The best way to tell if you have a bedbug infestation is to see the live, apple-seed-size critters for yourself. Unfortunately, once bedbugs take up residence in homes and businesses, they can be difficult to exterminate without professional help.
Bed bugs multiply quickly, and in just six months, a few can turn into a full-on infestation of 13,000 or more. Detection is critical to break the bed bug life cycle before they become a bigger problem. Orkin Bed Bug Detection Service gets to the root of the problem with targeted inspections of common bed bug hiding places in your home and ongoing monitoring to ensure the pests never return.

Vinegar can kill bed bugs if it comes into direct contact with them and it may help repel them from areas where it is sprayed. However, vinegar cannot be your only defense against bedbugs. For one, vinegar only works if you can see the bugs, and often they will hide or even just be too small to see easily. Second, vinegar will not kill bedbug eggs, which means that vinegar alone will never stop an infestation. Vinegar also needs to be reapplied frequently to have any effectiveness.
Cracks and crevices of bed frames should also be examined, especially if the frame is wood. (Bed bugs have an affinity for wood and fabric more so than metal or plastic.) Wooden support slats, if present, should be removed and examined since bed bugs often congregate where the ends rest on the frame. Screw holes, knots and other recesses are also common hiding places. Headboards secured to walls should be removed and inspected. In hotels, the area behind the headboard is often the first place that bed bugs become established. Bed bugs also frequently hide within items stored under beds. 

If the bed bugs are coming from someplace other than your bed, I’d sprinkle uncalcinated diatomaceous earth around cluttered areas and the walls, and bleach the crap out of surrounding furniture. What the diatomaceous earth does is basically attach to their exoskeleton, dehydrate the insect, and they’ll either die of dehydration or get shredded apart as they crawl. Unless your pet or kid would directly eat the diatomaceous earth, it is safe to be in contact with since it’s not a chemical pesticide and it’s fairly cheap.


Prior to the widespread use of synthetic insecticides, this small, brown blood-sucking bug was perhaps the most unwanted pest in America. The insidious bed bug was loathed even more than the cockroach. Although the bug’s impact was greatly reduced by insecticides during the 1940s and 1950s, it remained an occasional invader of homes, hotels and shelters. Pest management professionals now agree that bed bugs have become the most difficult pest to control.

If you arrive home and discover that you have brought some unwanted guests home with you, immediately notify the hotel of your discovery. Having a possible infestation in hotels and motels can be a public relations nightmare for the owners. Politely ask them to pay for any and all costs incurred to rid your clothing and home of a possible new infestation.

×