Apply as a coarse, low-pressure spray to harborage areas including crevices, baseboards, loose plaster, behind bed frames and headboards, beneath beds and furniture, and to bedsprings and bed frames. After removal of bed linens, apply Transport Mikron to mattress and boxsprings. Apply to tufts, edges, seams and folds (do not spray clothes or bed linens). Your may apply it to furniture, but not to areas where there is direct access to seating or arm placements. Infested bed linens should not be treated, but should be removed, placed in sealed plastic bags, and taken for laundering and drying at high temperatures.
Begin by reducing clutter in the room; things like clothes, books, and other personal belongings shouldn’t be left on the floor, as they make treatment more difficult and add hiding places for bed bugs and eggs. Seal those items in garbage bags and store them away from the room. Any clothing that was picked up or removed from dresser drawers should be dried on high heat for at least 45 minutes. Once treated, clothing that you don’t normally wear should be stored inside garbage bags outside of the infested room.
Research has shown that some bed bugs are resistant to the pyrethroid pesticides that have been most commonly used in recent years by pest management professionals. Likewise, pyrethroids such as deltamethrin and permethrin have been among the active ingredients most commonly available in pesticides at retail stores. The ongoing use of pyrethroids has undoubtedly contributed to the resistance we see today in some bed bug populations.
When the controversial pesticide DDT was banned in 1972, most bed bugs were already resistant to it, Schal says, and today's populations are even more widely resistant thanks to the use of a new class of pesticides. Pyrethroids, the main class of pesticides used against bedbugs today, targets sodium channels in bedbug cells, just like DDT. Consequently, as bedbugs develop resistance to pyrethroids, they also become cross-resistant to DDT.
Research has shown that some bed bugs are resistant to the pyrethroid pesticides that have been most commonly used in recent years by pest management professionals. Likewise, pyrethroids such as deltamethrin and permethrin have been among the active ingredients most commonly available in pesticides at retail stores. The ongoing use of pyrethroids has undoubtedly contributed to the resistance we see today in some bed bug populations.
Monitor your home. Bed bugs like to hide in cracks and crevices like walls, luggage, boxes, and clothing, but since they feed on humans while they sleep, they’re most commonly found in beds. If you suspect an infestation, or if you live in an apartment building with a bed bug problem, regularly inspect your bed sheets, mattress (including underneath), and box-spring seams for bugs. They’re flat and oval-shaped, with red or brown bodies, roughly the size of an apple seed. Watch for adults, nymphs, and eggs, as well as exoskeletons (casings that the bugs leave behind when they molt) and dark, rust-colored spots (feces).
Bedbugs lurk in cracks and crevices and they've been living on human blood for centuries. Though they aren't known to transmit disease or pose any serious medical risk, the stubborn parasites can leave itchy and unsightly bites. However, bedbugs don't always leave marks. The best way to tell if you have a bedbug infestation is to see the live, apple-seed-size critters for yourself. Unfortunately, once bedbugs take up residence in homes and businesses, they can be difficult to exterminate without professional help.
Checking beds for bed bugs was a common practice long ago, especially while traveling. Travelers today should consider doing the same, preferably before unpacking. This would entail examining the bed sheets and seams of the mattress and perhaps box spring for signs of bed bugs, especially along the head (pillow end) of the bed. Experts also remove and check behind headboards since this is a frequent hiding place for bed bugs in hotels. Headboards are heavy and cumbersome, however, and untrained persons should not attempt removal themselves.
Heat Remediation For this method, the area is heated to about 130 degrees F and maintained so the heat moves into the furniture and everything else in the room. Lazarus says there’s less preparation needed with this method (you’ll likely just need to remove things that are sensitive to heat, like medication and plants). It usually takes just one treatment to effectively kill all of the bed bugs at their various life stages. Sometimes heat remediation is used along with insecticide for an extra-thorough approach.
Bed bugs often hide in seams, folds and crevices of mattresses, box springs, bed frames and headboards. A thorough inspection requires dismantling the bed so that upper and lower seams and surfaces can be examined. Things to look for are the bugs themselves, shed skins of the nymphs (immature bed bugs), and the blackish fecal spots. The dark spots of dried bed bug excrement are often present along mattress seams or wherever the bugs have resided. Box springs afford many places for bed bugs to hide, especially along the upper seams and underneath, where the bottom edge of the box rests on the frame. If an underlying dust cover is present, it may have to be removed to gain access for inspection and possible treatment. Successful treatment of mattresses and box springs can be difficult, however, and infested ones may need to be discarded or encased in a protective cover. 
Well, among others, you would want to purchase Bed Bug Bully. As stated in FIFRA 25 (b), it is a minimum-risk pesticide. That’s because it is made with organic-based products. More than that, pest-control companies already proved that they truly work withtheir continuous use of it. And with its new licensing agreement, you could also now enjoy its effectiveness, safety and affordability.

Bed bugs are small, flat insects that feed on our blood, typically at night, while we are sleeping. Adult bed bugs are about 1/4 of an inch long, have flat, rusty-red-colored oval bodies, and look like an apple seed. They feed for about 3-10 minutes and their bodies swell and become bright red. During the bed bug life cycle, a female can lay 200-400 eggs depending on food supply and temperature. Bed bugs don't fly, but can quickly walk across floors, walls, and other surfaces.
Select and use insecticides safely. There are no magic sprays that kill bed bugs very well.  Most commercial insecticides will kill bed bugs if applied carefully and directly to the insects and their hiding places. An exception is “Bug bombs”, or aerosol foggers. Foggers are mostly ineffective in controlling bed bugs. Because bed bugs hide in crevices and voids where aerosols do not penetrate, they are able to avoid contact with these insecticides. Their use is not recommended. Some of the products you may find helpful include:

Systematically treat the room–all cracks and crevices around windows, outlets, blinds, pictures, posters and clocks on walls, baseboards, under edges of carpets and any other crevices or void areas in the room. Remember that immature bed bugs are very tiny. Dozens of bed bugs can hide in a recessed screw hole in a bed frame or dresser. Therefore it’s important that no hiding place be overlooked. Treatment can include vacuuming, but should not be limited to vacuuming only. Vacuums do not remove eggs, and will likely not remove all bed bugs from deeply infested cracks and crevices. Vacuums can remove many bed bugs from mattresses and the exterior of box springs (remember to immediately double-bag the vacuum bag after cleaning and dispose of outside in a trash can or dumpster). Sticky tape is another method of picking up bed bugs from furniture, walls, etc.


You can also try spraying an insecticide yourself. Just make sure the product you use is intended to kill bedbugs and is made for the type of space you are using it in (some are intended only for outdoor or garage use, rather than for indoor use in areas where you may be sleeping, cooking, and eating, among other things). And know that insecticides available to professionals are usually stronger and more effective than those that are available to consumers. (6)
I'm a former scientist, using words and an audio recorder as my new research tools to untangle the health and food issues that matter most to consumers. I live in Brooklyn, N.Y., where I cook as much as possible. You can find me in the grocery aisle scrutinizing the fine print of every food item I put into my cart. Follow me on Twitter @juliacalderone.
Great read and very helpful info. However, when you describe how to use essential oil sprays for bed bug treatment, it would be most helpful if you included the amount of water used to mix with the oils. Simply stating to use “a small spray bottle filled with water” isn’t a very good description. A quick search for “small spray bottle” will get results for a wide range from 2-ml to 16-ounce bottles, all classified as small. This makes for a rather potent mixture to an extremely weak mixture.
If you think that by discarding the whole bed means getting rid of bed bugs, you are wrong. By moving the mattress and the bed frame, you not only risk moving the bed bugs all around the house, you are also missing out on many other spots these bed bugs could be at. For example, curtains, floor panels and skirting or even the door frames are able to hide these bed bugs very well. The root causes of the infestation must be eradicated fully.
Bedbugs normally feed at night, usually approximately 1 hour before dawn. However, if the conditions are favorable, they also feed during the day. Feeding takes 3-12 minutes. In proper conditions, adult bedbugs can survive without a meal for 1 year or longer. Each female lays approximately 300 eggs in her lifetime. The eggs hatch in 10 days. The nymph stage lasts 6 weeks, undergoing 5 molts.
Bedbugs are diagnosed in two ways. The first is the appearance of bites on your body. However, these are very similar to other insect bites and can appear days after being bitten. Finding the signs of bedbugs in your sleeping environment is more conclusive evidence that there is an infestation. You will usually do your own self-diagnosis, but you might see a doctor due to unexplained bite marks or a skin infection after scratching. Learn how to determine whether you have been bitten by bedbugs.
You can check bedding, mattresses, furniture, and crevices in walls for bed bug infestation. Do your inspection just before dawn, which is when they are the most active. The bugs will be larger and slower after feeding. Bedbugs will quickly flee from light, so live bugs are best located in the folds and seams of mattresses and sheets. Bedbugs are about the size of an apple seed, about 1/4 inch long. They change from light brown to purple-red after feeding. You may also see their eggs, which are about the same size as the adults. The eggs will often be in seams, cracks, or crevices.
Bed Bugs can re-infest your freshly treated bed, so be sure to stop them from crawling up the bed posts by using Climb-Up Bed Bug Insect Interceptors. The Climb-Up Insect Interceptor is a small dish that is placed under the bed post and captures bedbugs in a a powder coated ring. These type of bed bug traps are very effective and should be used on every bed to help make a complete bed bug proof bed.
Pay attention to when the bites occur. Consider, for example, if you notice the bites after waking up when previously you hadn't noticed them. However, this can also be difficult to determine because each person's reaction time can vary significantly. Symptoms that result from the bite can manifest at any point from a couple of hours to more than a week after the bite occurred.

Some pest control firms utilize specialized heating equipment to de-infest furnishings, rooms, and entire dwellings. The procedure involves heating up the infested item or area to temperatures lethal to bed bugs. Portable heaters and fans are used to gradually heat the air to about 120 - 130°F while monitoring with strategically placed sensors. By carefully controlling the temperature, bugs and eggs are killed wherever they may be without damaging household items. 
While most of the bed bugs were wiped out by the chemicals, three groups continued to thrive after being treated with chlorfenapyr, and five groups were still kicking after being treated with bifenthrin. That means that while some bed bugs will respond to these chemicals, others won't—and it's likely that more and more bugs will become resistant over time.
Inspection requires knowledge, dedication and time. At minimum an inspection should involve a detailed examination of mattresses, box springs and bed frames, as well as likely hiding places for bed bugs within 20 feet of beds and other places where residents may sleep or rest, e.g., on couches). Clutter-free space will be needed to allow furnishings to be moved and manipulated for inspection. In general, rooms with more furnishings will take more time to inspect.
The best bed bug traps are those that are used under the bed. The Climb-Up Bed Bug Interceptor is placed below the bed frame rollers or legs. The Climb-Up prevents bed bugs from being able to crawl either from the bed to the floor or from the floor to the bed. The Climb-Up works very well at isolating the bed from the floor and making it bed bug proof. As long as the comforter or some other linen is not touching the floor, then the bed is protected.
Monitor your home. Bed bugs like to hide in cracks and crevices like walls, luggage, boxes, and clothing, but since they feed on humans while they sleep, they’re most commonly found in beds. If you suspect an infestation, or if you live in an apartment building with a bed bug problem, regularly inspect your bed sheets, mattress (including underneath), and box-spring seams for bugs. They’re flat and oval-shaped, with red or brown bodies, roughly the size of an apple seed. Watch for adults, nymphs, and eggs, as well as exoskeletons (casings that the bugs leave behind when they molt) and dark, rust-colored spots (feces).
Buy “say bye bugs” I think its liquid diatemacious earth food grade, I put powder down on my couch took all loose wood off and they were hidden under material sprayed and dusted it with the diatemacious earth kills them on contact, of course you have to do it 10 days. Because even dead they can lay eggs……keep spraying every day, wash bedding in hot water dry at least 45 min on high heat, after you think they are dead, put mattress or furniture in bed bug bag for a year, because they can stay alive for a year without eating…om working on it going on 3 days now!!
Bedbugs do, however, have a unique bite pattern. Although some bites may appear alone, most bites occur in a row of three to five bites (termed "breakfast, lunch, and dinner") or in a cluster of red bumps (a rash called bedbug dermatitis). The bites often appear in a zig-zag formation, but may appear in a straight line if the bugs bite you in the morning.
A cloth and hot soapy water: Like the sticky tape, a cloth with hot water can be useful for capturing bed bugs. Have a bucket of water handy and as you wipe an area, check the surface of the cloth for bed bugs and then immerse the cloth in the bucket. Wring the cloth to remove excess water; you do not need to soak the surface that you are wiping. Also, check the area that you just wiped because heat may cause hungry bed bugs to move. The cloth is particularly effective when you find a cluster or group of bed bugs. Keep in mind that wet surfaces will reduce the effectiveness of sticky tape as a trapping method.
Excessively scratching the itchy, bitten areas also may increase the chance of a secondary skin infection. Antiseptic creams or lotions can be used to ward off infection and antihistamines can be used to treat the itching. And an infestation can take a psychological toll on those affected: People whose homes have been infested with bedbugs may have trouble sleeping for fear of being bitten in the night. There are also public health, social and economic consequences; office buildings and schools often have to close if they are dealing with a bedbug infestation.
Heat Treatment – this method kills bed bugs with heat. This could be implemented on clothes by putting them in a drier at a high temperature for 30 minutes. In a room, the use of heating devices could kill even the eggs and the nymphs of bed bugs at certain levels temperature at different durations of time. Ideally, to kill bed bugs in all stages, the temperature must be 115 degrees F or 46 degrees C.
Cracks and crevices of bed frames should also be examined, especially if the frame is wood. (Bed bugs have an affinity for wood and fabric more so than metal or plastic.) Wooden support slats, if present, should be removed and examined since bed bugs often congregate where the ends rest on the frame. Screw holes, knots and other recesses are also common hiding places. Headboards secured to walls should be removed and inspected. In hotels, the area behind the headboard is often the first place that bed bugs become established. Bed bugs also frequently hide within items stored under beds. 
Whether you use traps or not, beds and bedclothes should not touch walls or furniture, and bed clothes should not contact the floor. In this way the bed is isolated, forcing bed bugs that attempt to access a sleeping person, to enter the traps, be captured and expire. Wrapping double-sided carpet tape or duct tape around bed legs also can trap bed bugs attempting to enter beds.

Bed bugs are highly vulnerable to heat; exposing them to a certain amount of direct heat will kill them instantly, while lower temperatures can kill them in a matter of minutes. This is why many forms of heat treatments are recommended. Some methods, such as steamers and portable heaters, have been proven effective through professional use and are quickly becoming standard issue in holistic treatment arsenals.
Ticks are known transmitters of disease to humans and animals. Tick-borne diseases include Lyme disease, Rocky Mountain spotted fever, Q fever, tularemia, babesiosis, and Southern tick-associated rash illness. Infected ticks spread disease once they've bitten a host, allowing the pathogens in their saliva and mouth get into the host's skin and blood. Tick bites are typically painless, but the site of the bite may later itch, burn, turn red, and feel painful. Individuals allergic to tick bites may develop a rash, swelling, shortness of breath, numbness, or paralysis. Tick bite treatment involves cleaning and applying antibiotic cream.
Some preparation is still required (e.g. removal of heat-sensitive items such as aerosol cans, indoor plants and medications), but it is seldom necessary to bag, launder and/or hot dry bedding and clothing since these items will be heated along with other furnishings. Another advantage of heat treatment is that infestations can often be eliminated in one day, rather than over multiple days or weeks. Conversely, heat treatment alone has no lasting (residual) effect should bed bugs be reintroduced into the dwelling. Consequently, some companies recommend concurrently applying residual insecticides. To further minimize reintroduction, occupants are advised to take as few belongings as possible with them while the heat treatment is in progress.    

Apply residual Bed Bug Insecticide Spray. After every crack, crevice, switch plate, electrical switch, baseboard, box springs, mattress, etc, has been treated and everything is put back, it is time for the residual treatment. Using a hand held sprayer such as the Chapin Sure Spray apply Optimate, Cy-Kick, Suspend SC or Demand along the baseboards in the bedroom and closet, under and around the bed, behind the headboard, inside bed stands etc.
Once Step 2B is complete and the insecticide mixture is dry, you can follow up with a bed bug aerosol spray. Bed bug aerosol sprays are insecticides that have fine particles that get deep into cracks and crevices. By using both a liquid concentrate insecticide mixture and an aerosol spray, you can treat bed bugs that may have built up a resistance to one product but not the other.
Treatment for bedbug bites is typically supportive. Local antiseptic lotions or antibiotic creams can be applied for secondary infections, whereas corticosteroid creams and oral antihistamines can be used for allergic reactions. Bedbugs can be eliminated through the use of permethrin insecticides, baited traps, special bedbug-free beds, and bed nets. Homemade methods, such as wrapping duct tape around bed legs as shown, may be effective, but bedbugs have been known to climb other objects and then fall down onto a bed. Image courtesy of Wikimedia Commons.
Desiccant dusts.  Two low toxicity dusts with good effectiveness include silica aerogel and diatomaceous earth (DE).  Both of these dusts are low risk to humans, and work by desiccating, or drying out, bed bugs that come in contact with it. Silica aerogel is, in some studies, superior for this purpose.  It is sold under various trade names including Tri-Die™ and CimeXa™.  Diatomaceous earth can also be effective.  Look for DE for insect control–it is not the same product as diatomaceous earth used in swimming pool filters, which is dangerous to breath. Some pest control companies now use desiccant dusts extensively in bed bug control. These relatively inexpensive dust can be purchased online or in garden centers or hardware stores. Look for products labeled for indoor use and lightly dust all accessible crack, crevices and voids.  A paint brush is useful for applying these dusts to seams and crevices in sofas and mattresses, along baseboards and inside drawers and dresssers.

Bed bugs are found across the globe from North and South America, to Africa, Asia and Europe. Although the presence of bed bugs has traditionally been seen as a problem in developing countries, it has recently been spreading rapidly in parts of the United States, Canada, the United Kingdom, and other parts of Europe. Bed bugs have been found in five-star hotels and resorts and their presence is not determined by the cleanliness of the living conditions where they are found.
Dust the wall voids. Bed bugs can often travel from room to room, especially in apartments, hotels and condo's. They travel along electrical wiring and plumbing lines. Specifically treat wall voids with a hand duster either by removing wall switch plate covers and/or drill access holes discreetly between studs. Cimexa Dust or Delta Dust are excellent choices for void applications. It kills populations in walls and voids and creates a repellent, hostile environment which reduces the likelihood of bed bugs traveling through voids to other areas. Use a small hand type duster to "puff" insecticidal dusts into these areas. A light coating is all that is needed. To much dust and the bed bugs will just crawl around it.
Bed bugs tend to congregate, but it’s also common to find a single bug or some eggs here and there. A thorough inspection and treatment may take up to several hours. Some companies use specially trained dogs to assist in finding small dispersed infestations, especially in such places as hotels, schools, libraries and office buildings. When properly trained, bed bug detection dogs can be quite effective. Relatively few companies are routinely using them, however, due to the expense of training and maintaining such animals. Reliability of some of the dogs is also being questioned as more enter the market.    
General housecleaning measures, (e.g. vacuuming floors and surfaces), seldom reach where bed bugs hide. For this reason, repetitive vacuuming by occupants may not be worth the effort, especially compared to other important preparatory activities. Targeted vacuuming of bed bugs and infested harborages, however, can help remove some of the bugs before other treatment measures are undertaken. Bed bugs and especially the eggs can be difficult to dislodge. Optimum results will be achieved by moving and scraping the end of the suction wand along infested areas such as seams and fabric folds of beds and sofas, and the perimeter edge of wall-to-wall carpet. Bed bugs can survive the high speed trip down a vacuum, so it’s important to carefully dispose of the vacuum contents in a sealed trash bag afterwards. 
Pay attention to when the bites occur. Consider, for example, if you notice the bites after waking up when previously you hadn't noticed them. However, this can also be difficult to determine because each person's reaction time can vary significantly. Symptoms that result from the bite can manifest at any point from a couple of hours to more than a week after the bite occurred. 

Insecticides are an effective way to eradicate bed bugs, but not the only way. If you or someone in your house is highly sensitive to chemicals, or you’re just not crazy about the idea of spraying chemicals where you sleep, kill the little blood suckers with heat. Temperatures above 120 degrees F kill all stages of bed bugs. Steamers can be used to treat all the same areas where you would have sprayed contact killers. Steamers like the one shown at (top) cost about $150 and are good for many other projects like removing wallpaper, cleaning tile, removing labels, cleaning engine parts and removing wrinkles from fabric.
Bedbugs are highly resistant to many sprays. There are, however, certain sprays that may be able to kill bedbugs. Check with a professional exterminator about advice using sprays to try and remove the bedbugs yourself. Dead bedbugs usually won't move, may be arched back, or red in color. Ultimately, you may be better off replacing your mattress and bedding and fumigating your home to kill the bedbugs.
What can I do about head lice? Head lice are tiny, parasitic insects that live on the scalp, usually on young children. They are not dangerous but are highly contagious and can be difficult to remove. Treatment involves OTC or prescription medication, but resistance to these treatments is growing. Learn more about treatment and home remedies here. Read now
Seal cracks and crevices between baseboards, on wood bed frames, floors and walls with caulking. Repair or remove peeling wallpaper, tighten loose light switch covers, and seal any openings where pipes, wires or other utilities come into your home. Pay special attention to apartments or rooms that share a wall - bed bugs can move through extremely small gaps to infest new areas.
In the case of beds, a more economical option is to encase both the mattress and box spring in a protective cover like those used for allergy relief. Encasements specifically designed to help protect against bed bugs are available through retail or pest control firms. Higher quality ones tend to be more durable and comfortable to sleep on. Once the encasement is installed and zipped shut, any bugs which happen to be inside are entombed and eventually will die. Encasements also help protect newly purchased beds, and make it easier to spot and destroy any bugs residing on the outer surface during subsequent examination. Encasements will not, however, keep bed bugs from crawling onto a bed and biting a sleeping person.
×