An adult bed bug is about 1/5 inch long and 1/8 inch wide. Its reddish brown to mahogany-colored body is greatly flattened and oval shaped. After feeding, the bug's body enlarges considerably, becoming longer and much less flattened. Although the body is covered with tiny hairs, these hairs are so small that they are almost invisible to the naked eye, so the general body appearance is shiny. Bed bugs have piercing-sucking mouthparts that enable them to pierce the skin and suck blood from their hosts.
Bed bug bites usually do not pose a serious medical threat. The best way to treat a bite is to avoid scratching the area and apply antiseptic creams or lotions and take an antihistamine. Bed bug infestations are commonly treated by insecticide spraying. If you suspect that you have an infestation, contact your landlord or professional pest control company that is experienced with treating bed bugs. The best way to prevent bed bugs is regular inspection for the signs of an infestation.
Treat or isolate your bagged items. For washable items research shows that dry cleaning, washing in hot water for 30 minutes, or tumble drying for 30 minutes on high will kill all stages of bed bugs. Non-washables are a little trickier.  Items that aren’t needed for a while can just be stored. It takes 2-5 months to kill bed bugs by isolating them in bags (the warmer the temperature, the shorter the survival time for starving bed bugs). Heating bags by placing in direct sunlight is one of the most effective methods during the warm summer months.  Seven pounds of items placed in clear bags in direct sunlight on a 95 degree day will get hot enough to kill all bed bug life stages in one afternoon.  Also, placing bagged items in a chest freezer (0 degrees F) for 8-10 hours is lethal for bed bugs and their eggs. Some toys may be disinfested by cleaning with hot soapy water and/or rubbing alcohol.
Prior to the widespread use of synthetic insecticides, this small, brown blood-sucking bug was perhaps the most unwanted pest in America. The insidious bed bug was loathed even more than the cockroach. Although the bug’s impact was greatly reduced by insecticides during the 1940s and 1950s, it remained an occasional invader of homes, hotels and shelters. Pest management professionals now agree that bed bugs have become the most difficult pest to control.
Thanks to pesticide resistance, those cans of spray at your local hardware store simply will not do, Schal says, adding: "Relying strictly on chemicals is generally not a good solution." The most effective solutions are fumigation and heat treatments, but these can cost a cool $2,000 to $3,000 apiece for a single-family home. Scientists are diligently pursuing other strategies, including freezing and bait similar to that used for cockroaches. In the October 2010 issue of the Journal of Economic Entomology Schal and colleagues at the U.S. Department of Agriculture published a technique that employs inexpensive infrared and vibration sensors to track bedbug movement, which could be applied to the development of automated traps that detect the pests.
To kill bed bugs is to save yourself from a lot of problems. However, before you could eliminate them, there are several preparatory steps that you first have to take so you will know how to get rid of bed bugs. With all those problems and pre-elimination work, many think it is better to prevent the pests by using bed bug spray than to let them in and just get rid of them.
Especially in situations where a large amount of time would be required for a pest management professional to thoroughly inspect a structure, bed bug detecting dogs are sometimes employed. Well-trained and handled dogs can also be of value in structures or units with lesser infestations, i.e., where human inspectors might easily overlook bed bugs because only a few bugs are present.
With practice and a flashlight, nonprofessionals can become proficient in finding and destroying bed bugs. The process is made easier by reducing clutter, especially in bedrooms and sleeping areas. Bugs that are spotted can be removed with a vacuum (see previous discussion), or killed with over-the-counter insecticides labeled for such use. Most bed bug sprays intended for householders have little remaining effect after the spray has dried. Therefore it’s important to initially contact as many of the insects as possible with the spray droplets. Insecticide labels should be read carefully as some bed bug products should not be used on mattresses and seating areas. Some insecticides applied as powders or dusts (e.g., diatomaceous earth) will kill bed bugs although boric acid powder will not. However powders can be messy and difficult to apply, especially by nonprofessionals. Total release foggers (otherwise known as ‘bug bombs’) are ineffective against bed bugs and potentially dangerous when used incorrectly (see University of Kentucky entomology fact sheet Limitations of Home Insect Foggers).
It’s perfectly natural to want to eliminate a bed bug infestation without spending a ton of money on professional-grade products or a treatment by a pest control operator. When people discover that they have bed bugs, they often turn to do-it-yourself recommendations from discussions on the Internet. These suggestions might include household items, some of which are recommended more often than others. Let’s take a closer look at some of the most popular items and how they might be used against bed bugs:
Spray all baseboards, loose plaster, behind bed frames and headboards, beneath beds and furniture, and bedsprings and bed frames. Do not apply to furniture surfaces or mattresses where people will be laying or sitting unless using a product labeled for that type of treatment. Infested bedding should not be treated, but should be removed, placed in sealed plastic bags, and taken for laundering and drying at high temperature.

Apply residual Bed Bug Insecticide Spray. After every crack, crevice, switch plate, electrical switch, baseboard, box springs, mattress, etc, has been treated and everything is put back, it is time for the residual treatment. Using a hand held sprayer such as the Chapin Sure Spray apply Optimate, Cy-Kick, Suspend SC or Demand along the baseboards in the bedroom and closet, under and around the bed, behind the headboard, inside bed stands etc.

DIY bed bug sprays are mostly ineffective in dealing with a large bed bug infestation. This is because a do-it-yourself method lacks proper knowledge on pest behavior to fully control the infestation. For example, bed bugs are real flat and tiny; they hide very well at unexpected places which you may not know. A pest control professional is able to identify key hotspots to treat effectively.
It's becoming easier to find bed bug mattress covers in local hardware stores. Menard's has one for 24.99 for all sizes. There are others, but beware! Some low quality versions are only plastic, tear easily, and have horrible cheap zippers. The real ones are made of a special fabric and heavy duty zippers. Also when you buy a new mattress, keep the plastic on as well as using a bug cover.
When professionals need to treat an infestation, they don’t reach for rubbing alcohol or cedar oil or a blow dryer. They use a proven treatment process that involves a combination of proven products to get the job done. It’s not about whether or not a certain item can kill bed bugs, it’s about whether that item is the ideal part of a treatment that will actually get rid of an infestation. After all, your shoe would have a 100% kill rate on any bed bugs you smack with it – that doesn’t mean you can expect to be bed bug free after a diligent afternoon of shoe-wielding.
Inspection requires knowledge, dedication and time. At minimum an inspection should involve a detailed examination of mattresses, box springs and bed frames, as well as likely hiding places for bed bugs within 20 feet of beds and other places where residents may sleep or rest, e.g., on couches). Clutter-free space will be needed to allow furnishings to be moved and manipulated for inspection. In general, rooms with more furnishings will take more time to inspect.
In the chemical-based category, there are two methods included. Though we consider the two as different means, they both rely on the use chemical pesticides. The first method is by hiring bed bug exterminators who use strong solutions to eliminate the pests. It offers an easy yet expensive and risky bed bug treatment even if the exterminator use the best chemical to kill bed bugs.
Copyright © 2019 HubPages Inc. and respective owners. Other product and company names shown may be trademarks of their respective owners. HubPages® is a registered Service Mark of HubPages, Inc. HubPages and Hubbers (authors) may earn revenue on this page based on affiliate relationships and advertisements with partners including Amazon, Google, and others.

Bedbugs lurk in cracks and crevices and they've been living on human blood for centuries. Though they aren't known to transmit disease or pose any serious medical risk, the stubborn parasites can leave itchy and unsightly bites. However, bedbugs don't always leave marks. The best way to tell if you have a bedbug infestation is to see the live, apple-seed-size critters for yourself. Unfortunately, once bedbugs take up residence in homes and businesses, they can be difficult to exterminate without professional help.
Today, bedbugs can be found in every State in the United States, and almost every city. Bedbugs are so common now that the federal government considers them almost "epidemic". The National Pest Management Association has declared war on bed bugs and has held bedbug meetings all across the Nation to help educate pest control companies in an effort to help control them.
We recommend spraying Steri-Fab in areas where live bed bugs are visible. Steri-Fab combines a synthetic pyrethroid insecticide and isopropyl alcohol to kill bed bugs fast on contact. Steri-Fab also acts as a sanitizer. Steri-Fab does not leave any residual, meaning it can be applied virtually anywhere. Simply shake well, then apply to desired treatment areas. Insect mortality is imminent, generally within 10 minutes of spraying.

Itchy swollen bites may be the first sign of a bed bug problem. However, these itchy bites can take as long as 14 days to develop in some people, so it's important to look for other clues if you are concerned about an infestation. Bed bugs typically infest mattresses, box springs, bed frames, and couches. You may be able to find them hiding within the cracks and crevices of beds, furniture, floors, and walls. Bed bugs often leave evidence of small dark stains (fecal droppings) and rusty red spots (bloodstains) on bedding sheets, mattresses, and other areas they hide in or travel along. Heavy bed bug infestations can cause a sweet, musty smell.
Raid MAX® No Mess Dry Fogger Raid® Wasp & Hornet Killer 33 Raid® Ant & Roach Barrier Raid® Ant & Roach Killer 26 Raid® Ant Baits III Raid MAX® Foaming Crack & Crevice Bed Bug Killer Raid MAX® Foaming Wasp & Hornet Killer Raid® Ant Gel Raid® Ant Killer 26 Raid® Bed Bug Detector & Trap Raid® Concentrated DEEP REACH™ Fogger Raid® Double Control Large Roach Baits Raid® Double Control Small Roach Baits Raid® Double Control Small Roach Baits and Raid® Plus Egg Stoppers™ Raid® Flea Killer Raid® Flea Killer Plus Carpet & Room Spray Raid® Flea Killer Plus Fogger Raid® Flying Insect Killer 7 Raid® House & Garden I Raid Max® Ant & Roach Raid® Bed Bug & Flea Killer I Raid Max® Bug Barrier Raid Max® Concentrated DEEP REACH™ Fogger Raid Max® Double Control Ant Baits Raid Max® Spider & Scorpion Killer
As for traps, these capture methods may not be full-proof for all bedbug species. Researchers have found that while both the common and tropical bedbug species have hairy feet, C. hemipterushas denser foot hairs, making this tropical insect an expert climber on slick surfaces. In the study, detailed on March 15, 2017, in the Journal of Economic Entomology, the researchers found that adult tropical bedbugs were much better at escaping traditional pitfall traps, which held onto most of the common bedbugs in the study.
Application entails treating all areas where the bugs are found or tend to hide or crawl. This takes considerable effort and follow-ups are usually needed. Companies typically treat seams, folds and crevices of bed components, chairs and sofas, but usually will not spray the entire sleeping surface or seating area. They also do not spray bed sheets, blankets or clothing, which instead should be hot washed or heated in a dryer. 
One method of applying freezing temperatures to bed bugs entails the use of carbon dioxide (CO2) applied as “snow” with a portable application device, i.e., Cryonite™. When applied directly onto bed bugs, the frozen CO2 will kill them. However, this method is similar to using contact pesticides, that is, there is no residual activity. It can kill only as many bed bugs as the applicator can find. The advantage of using this type of freezing device is that bed bugs may be killed quickly and without the use of more hazardous pesticides. Again, this is not a stand-alone treatment, and it is recommended that it be used as a supplemental to the application of residual pesticides and/or other means of control.
Next, vacuum and steam along baseboards, window sills, and the edge of the carpet. When you’re done vacuuming, the bag or canister should be cleaned or discarded to limit exposure of bed bugs to other parts of the home. The steamer can also be used to treat sofas, chairs, furniture, and cabinets. When applying steam, remember to move the nozzle slowly (about one inch per second) to ensure that all bed bugs and eggs are killed.
Bedbugs are most often found in hotels, hostels, shelters, and apartment complexes where lots of people come and go. Because bedbugs hide in small crevices, they can hitch a ride into your home on luggage, pets, furniture, clothing, boxes, and other objects. Bedbugs are found worldwide, but are most common in developing countries. Once rare in North America, they may be on the rise due, in part, to increases in international travel.
A lot of DIY bed bug recommendations involving household items stem from the desire to solve your bed bug problem without spending money or resorting to chemicals. Unfortunately, these recommendations don’t always pan out. Bloggers and forum posters usually aren’t professionals (this blog author being one of the exceptions). They haven’t done the same research, and they tend not to have much experience getting rid of bed bugs themselves.

The most frequent bed bug encountered in the United States is Cimes lectularius, the common bed bug. However, one other bed bug species occasionally found in the southern United States, is Cimex hemiperus, the tropical bed bug. Both of these species are oval, flat and reddish brown. They range from one-fourth inch to five-eighths inch in length. Nymphs and adults have piercing-sucking mouthparts and are incapable of flight. However, small stubby wing remnants can be observed on the adults.


While alcohol can kill bed bugs on contact, it’s not going to kill nearly enough of bed bugs to be considered effective. In lab studies, even 99 percent concentrations of alcohol only killed between 40% to 60% of the adults that were sprayed. On top of that, alcohol has no long-lasting residual effect, and doesn’t affect bed bug eggs. 60% sounds good, but a contact killer should be able to kill a lot closer to 100% of the bed bugs you see. Otherwise, a shoe or a blowtorch would be the more reliable tool for the job. (Editor’s note: please don’t use a blowtorch.)
We are often asked, "How do you kill bed bugs?" While we would love to give a simple answer, this is actually a loaded question. There are many ways to kill a bed bug but, if you want to kill all of the bed bugs in your home or business, it is important to pay attention to the details. Here are some ways you can kill bed bugs, and what you should know about each.
CrossFire Bed Bug Concentrate has two different active ingredients for dual modes of action (both a quick kill and residual activity). Mix 3 oz of CrossFire Insecticide with one gallon of water or 0.75 oz per quart (Remember to use what you mix-within 24 hours.) Adjust the spray pattern to a mist by turning the nozzle. A low fine mist is best for most spraying, but you may need to use a stream to get into some cracks and crevices. If you can't get into the cracks and crevices use one of the aerosols described below with it's crack and crevice tips to reach into these areas.

The next recommendation is a mixture of essential oils. You might see one of many oils or combinations of oils in online discussion, whether it’s clove oil, cedar wood, lavender, or a combination of mint oils. The use of these against bed bugs dates back centuries, as their simple method of suffocating the bugs predates the use of sophisticated chemical killers.


Some bed bug products cannot be used where others can. Also, bed bugs can build up a resistance to certain pyrethroids, making them difficult to treat. This is why using a variety of products to kill and control bed bugs will produce the best results. We recommend using one of our bed bug kits. These kits include our most powerful and effective products for a variety of applications to save you time and money. 

Once the mattress and box spring are dry, encase them in sealed bed bug encasements. Encasements are crucial, as they prevent bed bugs from entering or escaping the mattress and box spring, cutting off key hiding places. Remember to leave the encasements on for at least 18 months to ensure that any bed bugs already inside have starved to death. Once the encasements have been applied, you can put your mattress and box springs back on your treated bed frame, and put your laundered bedding back on your bed.

Skin reactions from bed bug bites vary from person to person. Bites may go unnoticed or may be mistaken for flea or mosquito bites or other skin conditions. The most common skin reaction to bed bug bites are itchy red bite marks that appear clustered or in a straight line, often along the edge of clothing or where sheets were pulled up to a person's skin. Small swollen red bumps are also common. In rare cases, people may develop large, often itchy, red welts. A single bed bug bite is similar to a flea bite, except that a red area does not occur in the center. Flea bites tend to be found around the ankles while bed bugs tend to bite any exposed area of the body while a person is sleeping, such as the face, neck, arms, hands, or legs.

Treat mattress box spring and furniture voids with Cimexa Dust or Delta Dust. Turn bed box springs over and remove the cloth cover seal. Thoroughly inspect and treat the box springs area with insecticidal dust. After treatment replace the cloth cover seal with staples or screws. Hollow bed-frames, platforms, headboards and any other voids discovered during inspection should also be treated where possible. The upper mattress can be sprayed and treated with Bedlam Plus, Zenprox or Sterifab.
It was stated in 2012 that no truly effective insecticides were available.[6] Insecticides that have historically been found effective include pyrethroids, dichlorvos, and malathion.[4] Resistance to pesticides has increased significantly over time, and harm to health from their use is of concern.[3] The carbamate insecticide propoxur is highly toxic to bed bugs, but it has potential toxicity to children exposed to it, and the US Environmental Protection Agency has been reluctant to approve it for indoor use.[33] Boric acid, occasionally applied as a safe indoor insecticide, is not effective against bed bugs[34] because they do not groom.[35]
Once Step 2B is complete and the insecticide mixture is dry, you can follow up with a bed bug aerosol spray. Bed bug aerosol sprays are insecticides that have fine particles that get deep into cracks and crevices. By using both a liquid concentrate insecticide mixture and an aerosol spray, you can treat bed bugs that may have built up a resistance to one product but not the other.
Bed bugs like to travel and are good hitchhikers. They will hide in suitcases, boxes and shoes to be near a food supply. They are elusive, nocturnal creatures. They can hide behind baseboards and in cracks, crevices, and folded areas of beds, bedding and adjacent furniture, especially mattresses and box springs. Bed bugs can also hide in electrical switchplates, picture frames, wallpaper and nearly anywhere inside a home, car, bus, or other shelter. Bed bugs usually come out at night for a blood meal. However, they are opportunistic insects and can take a blood meal during the day, especially in heavily-infested areas. Bed bugs usually require 5-10 minutes to engorge with blood. After feeding, they move to secluded places and hide for 5-10 days. During this time in the bed bug life cycle, they do not feed but instead digest their meal, mate, and lay eggs.
Next, vacuum and steam along baseboards, window sills, and the edge of the carpet. When you’re done vacuuming, the bag or canister should be cleaned or discarded to limit exposure of bed bugs to other parts of the home. The steamer can also be used to treat sofas, chairs, furniture, and cabinets. When applying steam, remember to move the nozzle slowly (about one inch per second) to ensure that all bed bugs and eggs are killed.
Bed bugs have five immature nymph life stages and a final sexually mature adult stage.[13] They shed their skins through ecdysis at each stage, discarding their outer exoskeleton.[14] Newly hatched nymphs are translucent, lighter in color, and become browner as they moult and reach maturity. Bed bugs may be mistaken for other insects, such as booklice, small cockroaches, or carpet beetles; however, when warm and active, their movements are more ant-like, and like most other true bugs, they emit a characteristic disagreeable odor when crushed.
Once a pest of the past, bedbugs now infest every state in the U.S.. Cimex lectularius—small, flattened insects that feed solely on mammalian and avian blood—have been living with humans since ancient times. Abundant in the U.S. prior to World War II, bedbugs all but vanished during the 1940s and '50s thanks to improvements in hygiene and the use of pesticides. In the past 10 years, however, the pests have staged a comeback worldwide—an outbreak after the 2000 Summer Olympics in Sydney was a harbinger of things to come. This revival may be the worst yet, experts say, due to densely populated urban areas, global travel and increasing pesticide resistance—something to consider as the summer travel season gets underway.
Some pest control firms utilize specialized heating equipment to de-infest furnishings, rooms, and entire dwellings. The procedure involves heating up the infested item or area to temperatures lethal to bed bugs. Portable heaters and fans are used to gradually heat the air to about 120 - 130°F while monitoring with strategically placed sensors. By carefully controlling the temperature, bugs and eggs are killed wherever they may be without damaging household items. 
Once the mattress and box spring are dry, encase them in sealed bed bug encasements. Encasements are crucial, as they prevent bed bugs from entering or escaping the mattress and box spring, cutting off key hiding places. Remember to leave the encasements on for at least 18 months to ensure that any bed bugs already inside have starved to death. Once the encasements have been applied, you can put your mattress and box springs back on your treated bed frame, and put your laundered bedding back on your bed. 

^ John Southall. "That soon after the Fire of London, in some of the new-built Houses they were observ'd to appear, and were never noted to have been seen in the old, tho' they were then so few, as to be little taken notice of; yet as they were only seen in Firr-Timber, 'twas conjectured they were then first brought to England in them; of which most of the new Houses were partly built, instead of the good Oak destroy'd in the old". A Treatise of Buggs [sic], pp. 16–17. Retrieved 1 December 2016.

If you need to treat items that can’t be laundered or steamed, you can use a portable bed bug heater, like a ZappBug Oven or a ThermalStrike Ranger. These heaters can safely treat household items like books, papers, CDs, and dry clean only clothing. Not only are bed bug heaters an effective part of a bed bug treatment process, but they’re one of the most popular prevention tools on the market. When you come home from a trip, just put your suitcase in the heater, zip it shut, and turn it on. In just a few hours, any bed bugs or eggs hiding in your belongings will be dead.
Some less proven heat weapons have been suggested online, such as clothes irons. Clothes irons might reach the temperature needed to kill bed bugs, but the heat won’t penetrate deep into soft materials to where bed bugs might be hiding. You also can’t iron areas besides clothes and sheets, like cracks and crevices in walls, floors, and furniture. The metal surface and high surface heat would damage many of the materials it wasn’t designed to be used on.
It takes time and persistence to get rid of bed bugs, and in some cases, the cooperation of landlords, neighbors and others. It can be physically and emotionally exhausting. It can also be expensive when pest control companies are called in. Just remember - bed bugs are more of a nuisance than a health concern and, with vigilance, you can avoid or deal with infestations.

Well, among others, you would want to purchase Bed Bug Bully. As stated in FIFRA 25 (b), it is a minimum-risk pesticide. That’s because it is made with organic-based products. More than that, pest-control companies already proved that they truly work withtheir continuous use of it. And with its new licensing agreement, you could also now enjoy its effectiveness, safety and affordability.
×