Some people develop allergic reactions to bedbug bites, which can include a fever, difficulty breathing, hives, or a swollen tongue. Others may develop an infection where the bite starts oozing pus. If you experience either of these reactions or you develop blisters where the bites occurred, it’s a good idea to make an appointment with a dermatologist.
Some pest control firms also employ commercial steamers or spot-freezing equipment to treat areas where bed bugs are found or suspected. Used correctly, they kill bugs and eggs on contact. Neither method, however, affords residual protection against bed bugs which may have been missed. Steaming and spot-freezing equipment also have limited ability to penetrate fabric, wood, and other materials where bed bugs often reside.
One of the many uses of tea tree oil around the house is to use it as a DIY natural bed bug spray. Tea tree oil contains compounds that have an insecticidal effect against insects as well as their larvae and eggs. Although no direct studies have been published on the effect of tea tree oil on bed bugs, research has shown that it has a lethal effect on many bugs and insects.
I work @ a hotel, and just found out that one of the rooms has a bed bug problem. I work at the front desk, and never go into the rooms. But i work third shift, and sleep in the chair in the lobby. Just wanted to know what my chances were of catching them? I will be going home and looking just to make sure. But since i work here, and its un-avoidable, what are some things i can do to protect myself from taking them home?
Inspection requires knowledge, dedication and time. At minimum an inspection should involve a detailed examination of mattresses, box springs and bed frames, as well as likely hiding places for bed bugs within 20 feet of beds and other places where residents may sleep or rest, e.g., on couches). Clutter-free space will be needed to allow furnishings to be moved and manipulated for inspection. In general, rooms with more furnishings will take more time to inspect.
Insecticide Application This is the most common way to get rid of bedbugs, Lazarus says. Oftentimes, the professional will use several different products to effectively treat the area, though it may take a few rounds to ensure removal. “The advantage to this method is that the residual insecticide will continue to offer protection for a period of time,” Lazarus says. “The biggest drawback is that the preparation for service is time-consuming and must be repeated prior to each service.”
People don't often consider bed bugs until they've left their mark. The appearance of flat, red welts in zigzag lines or small clusters is a key sign of bed bugs on humans. Bed bugs can also leave their bites in straight rows and, while they don't spread diseases to humans, their bites are quite irritating and scratching them can lead to bleeding and infection.
While your laundry cycle is running, use a vacuum cleaner to remove any bed bugs, shells, fecal droppings, or eggs that might be along the seams of your mattress, pillows, box spring, and along the cracks and crevices in the bed frame, headboard, and footboard. Follow up the vacuuming with a high pressure steamer to penetrate deep inside mattresses, box springs, bed frames, headboards, and footboards to kill bed bugs and eggs on contact.
Treatment is symptomatic. Eliminating bed bugs from the home is often difficult, partly because bed bugs can survive up to a year without feeding. Repeated treatments of a home may be required. These treatments may include heating the room to 50 °C (122 °F) for more than 90 minutes, frequent vacuuming, washing clothing at high temperatures, and the use of various pesticides.
One method of applying freezing temperatures to bed bugs entails the use of carbon dioxide (CO2) applied as “snow” with a portable application device, i.e., Cryonite™. When applied directly onto bed bugs, the frozen CO2 will kill them. However, this method is similar to using contact pesticides, that is, there is no residual activity. It can kill only as many bed bugs as the applicator can find. The advantage of using this type of freezing device is that bed bugs may be killed quickly and without the use of more hazardous pesticides. Again, this is not a stand-alone treatment, and it is recommended that it be used as a supplemental to the application of residual pesticides and/or other means of control.
Other types of bed bug traps include those that do not rely on humans as bait, but instead use CO2and/or other attractants. CO2 is thus far the most powerful lure for bed bugs, as it is the primary cue they follow to locate hosts. Traps that issue CO2 for a period of time are more expensive than Climbup™ traps, but can effectively trap bed bugs when no host is present, such as in common areas, vacant homes or units, offices, schools, and theaters. Thus they can help confirm infestation and eradication.
Quote: Similarly, bed bugs will perish in extremely cold temperatures. If it is possible to keep a room unheated for a prolonged period of time, it may kill the population. All stages of the common bed bug, from nymphs to adults, can survive for up to five days in temperatures of fourteen degrees Fahrenheit. Prolonged exposure, however, to these temperatures, will kill them.
Pyrethroid sprays are among the stronger and longer-lasting pesticides, but most bed bugs are resistant to these sprays to some degree. Special care should be taken when using pyrethroid sprays, especially when children are present. Only use pyrethroids in places indicated on the label. Do not spray electrical outlets with any type of liquid spray. Spraying should be done when children are not present, and all label directions followed carefully.
Steaming is a great option in rooms and areas where the use of pesticides must be limited due to health or other concerns. When using the steamer, take your time and slowly move the steamer across the item you are treating for the best possible treatment. We still strongly recommend you follow-up with an insecticide labeled for bed bugs in areas where it is permissible to do so. All steaming should be done prior to covering a mattress or box spring with a protective cover and applying insecticides.
Dessicants are substances that destroy the bugs’ protective outer coating. Without this coating, the bugs dry out and die. Two examples of dessicants are silica aerogel (Tri-Die and CimeXa) and diatomaceous earth. The advantage to dessicants is that bedbugs can’t become resistant to them, but they work slowly. These products can take a few months to kill off all the bugs.
Waking up with bites might be the first indicator that you have a bed bug problem. Their bites are often arranged in lines or clusters on the face, neck, arms or hands. Where there are bed bugs in large numbers, you might smell a sweet, musty odor (from the bugs’ scent glands) or see rust-colored spots on your bedding or mattress caused by bed bug blood or excrement. If you look closely, you might see adult bed bugs themselves, usually in mattress folds or seams or on the wall behind the headboard. Bed bugs prefer to stay close to their food source and are typically found hiding out within 1 to 5 ft of infested beds or furniture.
To use EcoRaider, the manufacturers recommend spraying all edges and seams of mattresses, as well as box springs, and bed frames. You can also use the spray to kill bed bugs from cushions, behind baseboards, edges of carpets, and moldings. It is safe for the whole household and won’t harm pets. You can get more information about EcoRaider and purchase it in Amazon here.
Insecticides are an effective way to eradicate bed bugs, but not the only way. If you or someone in your house is highly sensitive to chemicals, or you’re just not crazy about the idea of spraying chemicals where you sleep, kill the little blood suckers with heat. Temperatures above 120 degrees F kill all stages of bed bugs. Steamers can be used to treat all the same areas where you would have sprayed contact killers. Steamers like the one shown at (top) cost about $150 and are good for many other projects like removing wallpaper, cleaning tile, removing labels, cleaning engine parts and removing wrinkles from fabric.
Encase Mattresses and use bed bug interceptor traps on bed frames. After everything is put back and all pesticides are dried, vacuum the area again to remove any dead or dying bedbugs and to pick up any spilled dust or pesticide. Be sure to throw the vacuum cleaner bag away outdoors. A thorough treatment is essential to achieve adequate control. It is usually desirable to apply insecticides for bed bugs early in the day, so that insecticide spray residues will have several hours to dry, or dusts will have time to settle, before the room will be used again for sleeping. As a safety consideration it is particularly important to dry and cover mattresses completely before they are reused. A mattress encasement such as The Elite Zippered Mattress and Boxspring Encasement should be used to cover and conceal the mattress and the boxsprings. It is important to use a quality zippered encasement (cover) with a special zipper closure to make sure that bedbugs do not crawl out of the zipper opening.
Because their bodies are flat, they can hide under the smallest spots like the border of beds, under the mattress, edges of carpets, couches, cracks in the walls and ceilings, in your pillows, under your bed sheets, behind electrical plugs and wall sockets, in your cupboards and dressers, or under furniture. In fact, bed bugs prefer any fabric materials. They can travel pretty good distances, too. Expect them to be able to be found anywhere in the room.
First up are the contact sprays, like STERI-FAB and JT Eaton Kills Bed Bugs. These will kill quickly, but evaporate shortly after, leaving no long-lasting protection. Spray along baseboards, below drawers and on drawer slides, behind cabinets, and behind night stands. Follow up with a residual spray, such as Bedlam Plus and JT Eaton Kills Bed Bugs Plus. Residual sprays will offer long-lasting protection against bed bugs and hatchlings. Bedlam Plus is ideal for cracks and crevices throughout the room, while JT Eaton Plus can be used below the cushions and bases of sofas, chairs, edges of carpets and other fabric items.
After bedbugs find a food source, they bite down with their mouths and inject anticoagulant and anesthetic compounds into the skin. Depending on the species, these parasites feed on the host blood via 1 of 2 mechanisms. Vessel feeders directly insert their mouthparts into superficial capillaries, whereas pool feeders damage the superficial tissue and feed on the accumulated blood. As bedbugs feed, their color may change as they swell with the host blood, as shown in this picture of a larval bedbug feeding on a volunteer host. Image courtesy of the US Centers for Disease Control and Prevention (CDC).
To check for signs of a bedbug infestation, Dr. DerSarkissian says that you may notice rusty-colored spots on bed linen and mattresses. These spots could be either blood stains or bedbug excrement. You may also find shed skins around bed frames, mattresses, and other hiding places. Also, a musty smell is usually present where a large number of bed bugs are living.4
"In the past, bedbugs have repeatedly shown the ability to develop resistance to products overly relied upon for their control. The findings of the current study also show similar trends in regard to chlorfenapyr and bifenthrin resistance development in bedbugs," study researcher Ameya Gondhalekar, research assistant professor at Purdue's Center for Urban and Industrial Pest Management, said in the Entomology Today statement. "With these findings in mind and from an insecticide resistance management perspective, both bifenthrin and chlorfenapyr should be integrated with other methods used for bed bug elimination in order to preserve their efficacy in the long term."
THIS TOOL DOES NOT PROVIDE MEDICAL ADVICE. It is intended for general informational purposes only and does not address individual circumstances. It is not a substitute for professional medical advice, diagnosis or treatment and should not be relied on to make decisions about your health. Never ignore professional medical advice in seeking treatment because of something you have read on the WebMD Site. If you think you may have a medical emergency, immediately call your doctor or dial 911.
Pesticides should always be used with caution, and especially when used indoors. Never use a pesticide for bed bugs that does not bear clear directions stating that it can be used indoors. Never spray yourself, children or pets with a pesticide. And follow the label safety directions carefully. Pesticide labels contain directionsfor use that are not merely suggestions. Failure to follow directions exactly is illegal and can result in poor control and possible harm to yourself and family. For more information, see the EPA Consumer Alert on pesticides and bed bugs.
However, low-level infestations are also much more challenging to find and correctly identify. Other insects, such as carpet beetles, can be easily mistaken for bed bugs. If you misidentify a bed bug infestation, it gives the bugs more time to spread to other areas of the house or hitchhike a ride to someone else's house to start a new infestation. Learn about identifying bed bugs.
Another common suggestion is to use either double-sided tape or Vaseline. The theory is that you can stop bed bugs from climbing the legs of your bed by applying these to the legs. Unfortunately, report after report from customers has indicated that these solutions simply don’t work. I hear all the time about bed bugs crawling right over Vaseline, carpet tape, and other adhesive traps like glue boards.
Fumigation using a penetrating gas is another way to de-infest dwellings or furnishings, but the procedure is only offered by certain companies. True fumigation is not the same as setting off a total release fogger or ‘bug bomb.’ (It should be noted that bug bombs are considered ineffective in the treatment of bed bugs, and can be quite dangerous if misused.) The fumigation process is technically complex and requires vacating the building for a period of days. The building is then sealed and injected with a lethal gas, usually sulfuryl fluoride. Because the entire building must be vacated, structural fumigation is logistically more challenging with multi-unit buildings such as apartments, than for single family homes. Bed bug fumigations tend to be more common in southern and western states, where the procedure is also used to control certain types of wood-dwelling termites.
Wash bedding and clothing (hot water and hot drying cycle for 30–60 minutes), vacuum cracks and crevices, and freeze articles that may have been used as hiding places for bedbugs may reduce infestation until extermination can be performed. Vacuum with special attention to cracks and crevices in furniture, equipment, walls, and floors. Vacuuming some talcum powder will reduce the chance that the bugs will crawl out of the vacuum cleaner. Dispose of the vacuum cleaner filter and bags in a tightly sealed plastic bag.
Treat other areas in your home. This is perhaps the most challenging part of do-it-yourself bed bug control. If you catch an infestation early you may not need to do anything more than treat and isolate your bed as described above. But if an infestation has spread to other parts of the home, bed isolation may not be good enough. Here is where professional help may be needed, especially if you’re not up to moving furniture. Still determined? Here are some tips that may improve your chances of success: