Heat Remediation For this method, the area is heated to about 130 degrees F and maintained so the heat moves into the furniture and everything else in the room. Lazarus says there’s less preparation needed with this method (you’ll likely just need to remove things that are sensitive to heat, like medication and plants). It usually takes just one treatment to effectively kill all of the bed bugs at their various life stages. Sometimes heat remediation is used along with insecticide for an extra-thorough approach.
According to textile experts (Drycleaning & Laundry Institute, Laurel, MD), most garments designated as ‘dry-clean only’ (e.g., cotton, wool, silk, linen, rayon, nylon) will not be harmed provided they are dry before being placed in a clothes dryer at a moderate temperature setting. Dry cleaning procedures also kill bed bugs, but there is a risk of infesting the establishment when buggy items are tagged and sorted.
It's possible that your son is just the only one showing a reaction to them - or the bedbugs are in his room somewhere. Thoroughly examine the bedding, mattress, under the bed, and the room in general. Usually it's best to call an exterminator to completely get rid of bed bugs. As for where they came from in the first place, there's usually numerous ways for bugs to get into a house or apartment - cracks, open doors/windows, unknowingly bringing into the home something with bedbugs, etc.
Repeat this same search with the box-spring. The only difference is that box-springs usually have plastic edge guards and a loose fabric called “ticking” stapled on the underside. These seams and edges on the underside of the box-spring are very common hiding places for bed bugs. To ensure there are no bed bugs inside the box-spring, you should remove the ticking and check the wood, cracks and crevices, and screw holes within. After inspection, the ticking can be re-stapled in place.
Mechanical approaches, such as vacuuming up the insects and heat-treating or wrapping mattresses, are effective. An hour at a temperature of 45 °C (113 °F) or over, or two hours at less than −17 °C (1 °F) kills them. This may include a domestic clothes drier for fabric or a commercial steamer. Bed bugs and their eggs will die on contact when exposed to surface temperatures above 180 °F (82 °C) and a steamer can reach well above 230 °F (110 °C). A study found 100% mortality rates for bed bugs exposed to temperatures greater than 50 °C (122 °F) for more than 2 minutes. The study recommended maintaining temperatures of above 48 °C (118 °F) for more than 20 min to effectively kill all life stages of bed bugs, and because in practice treatment times of 6 to 8 hours are used to account for cracks and indoor clutter. This method is expensive and has caused fires. Starving them is not effective as they can survive without eating for 100 to 300 days, depending on temperature. One expert recommends not trying to get rid of bed bugs exclusively on one's own.
You can check bedding, mattresses, furniture, and crevices in walls for bed bug infestation. Do your inspection just before dawn, which is when they are the most active. The bugs will be larger and slower after feeding. Bedbugs will quickly flee from light, so live bugs are best located in the folds and seams of mattresses and sheets. Bedbugs are about the size of an apple seed, about 1/4 inch long. They change from light brown to purple-red after feeding. You may also see their eggs, which are about the same size as the adults. The eggs will often be in seams, cracks, or crevices.
They also have the ability to travel beyond the bedroom, so all adjoining rooms should be checked for infestation. Any area that offers a layer of protection, e.g. dark, isolated areas, should be checked. They do leave excrement droppings behind, so even if they are not seen, you can often see where they have been. The best method to find them is to check only at night, and with a red light.
CrossFire Bed Bug Concentrate has two different active ingredients for dual modes of action (both a quick kill and residual activity). Mix 3 oz of CrossFire Insecticide with one gallon of water or 0.75 oz per quart (Remember to use what you mix-within 24 hours.) Adjust the spray pattern to a mist by turning the nozzle. A low fine mist is best for most spraying, but you may need to use a stream to get into some cracks and crevices. If you can't get into the cracks and crevices use one of the aerosols described below with it's crack and crevice tips to reach into these areas.
Mix 8 ml (about 1/3 oz)(measurements on the bottle) or one 8 ml vial of Temprid FX with one gallon of water. Remember to use what you mix-within 24 hours. Adjust the spray pattern to a mist by turning the nozzle. A low fine mist is best for most spraying, but you may need to use a stream to get into some cracks and crevices. If you can't get into the cracks and crevices use one of the aerosols described below with it's crack and crevice tips to reach into these areas.
As mentioned earlier, applying insect repellent at bedtime will probably not deter bed bugs from biting. When working in severely infested dwellings, there may be some benefit to spraying tops and bottoms of shoes with DEET-based repellents. Those working in bed bug-infested environments may also want to hot wash or run clothing, etc. through a dryer upon returning home or to the office.
Killing all bed bugs on your bed frame and headboard. Normally this would be done by a pest control professional. Approximately 70% of all bed bugs in the typical infestation are located on the mattress, box spring and bed frame. You’ve encased the mattress and box spring and taken care of that problem. Now you have to make sure that your bed frame is bed bug free. Vacuuming alone won’t do this. Vacuuming can remove many bed bug adults and nymphs, but it isn’t very good at removing eggs. For this job you’ll need insecticide sprays and possibly dusts to treat every crevice and void in your bed. For insecticide spray and dust options see below. Remember that insecticides can be hazardous if you don’t follow label directions. Read the whole label before spraying or dusting. The label directions are the law and failure to follow the label not only puts you and your family at risk, it is against the law. Homemade sprays, by the way, are usually less safe than commercial insecticides. Stick with the legal stuff.
Pay attention to when the bites occur. Consider, for example, if you notice the bites after waking up when previously you hadn't noticed them. However, this can also be difficult to determine because each person's reaction time can vary significantly. Symptoms that result from the bite can manifest at any point from a couple of hours to more than a week after the bite occurred.
If you need to treat items that can’t be laundered or steamed, you can use a portable bed bug heater, like a ZappBug Oven or a ThermalStrike Ranger. These heaters can safely treat household items like books, papers, CDs, and dry clean only clothing. Not only are bed bug heaters an effective part of a bed bug treatment process, but they’re one of the most popular prevention tools on the market. When you come home from a trip, just put your suitcase in the heater, zip it shut, and turn it on. In just a few hours, any bed bugs or eggs hiding in your belongings will be dead.
Bed bug infestations are primarily the result of two species of insects from genus Cimex: Cimex lectularius (the common bed bug) and Cimex hemipterus. These insects feed exclusively on blood and may survive a year without eating. Adult Cimex are light brown to reddish-brown, flat, oval, and have no hind wings. The front wings are vestigial and reduced to pad-like structures. Adults grow to 4–5 mm (0.16–0.20 in) long and 1.5–3 mm (0.059–0.118 in) wide.