Spray all baseboards, loose plaster, behind bed frames and headboards, beneath beds and furniture, and bedsprings and bed frames. Do not apply to furniture surfaces or mattresses where people will be laying or sitting unless using a product labeled for that type of treatment. Infested bedding should not be treated, but should be removed, placed in sealed plastic bags, and taken for laundering and drying at high temperature.
If disposal isn't an option, encasing the mattress and box spring will be helpful if bugs are still present (allergy supply companies sell zippered bed encasements for dust mite prevention). Vacuuming and brushing will further help to remove bugs and eggs from mattresses and box springs that cannot be discarded. Some pest control firms also treat beds with portable steam machines. The technique is useful, but does not kill bugs or eggs that are hidden inside the box spring or mattress.
While alcohol can kill bed bugs on contact, it’s not going to kill nearly enough of bed bugs to be considered effective. In lab studies, even 99 percent concentrations of alcohol only killed between 40% to 60% of the adults that were sprayed. On top of that, alcohol has no long-lasting residual effect, and doesn’t affect bed bug eggs. 60% sounds good, but a contact killer should be able to kill a lot closer to 100% of the bed bugs you see. Otherwise, a shoe or a blowtorch would be the more reliable tool for the job. (Editor’s note: please don’t use a blowtorch.)
Pesticides alone are not the answer to bed bugs. Most of the commonly used pesticides today, including professional products and consumer products advertised for control of bed bugs, are at best moderately effective at controlling these pests. Pesticides must be used with care for safety and with attention to proper application to work well. Aerosol “bug bombs” or “fumigators” are also mostly ineffective in eliminating bed bugs. Aerosol insecticides mainly kill insects that are exposed, and out of their hiding places, not those hidden behind baseboards, in cracks and crevices of the bed, under carpet edging and in walls.
Bed bug bites are caused primarily by two species of the insect Cimex: Cimex lectularius (the common bed bug) and Cimex hemipterus. Their size ranges between 1 and 7 mm. They spread by crawling between nearby locations or by being carried within personal items. Infestation is rarely due to a lack of hygiene but is more common in high-density areas. Diagnosis involves both finding the bugs and the occurrence of compatible symptoms. Bed bugs spend much of their time in dark, hidden locations like mattress seams or cracks in the wall.
Please be sure to read the product label of any insecticide you choose to use to get information on the personal protective safety gear you will need. In most situations, it is recommended that you wear long pants, a long sleeved shirt, closed toe shoes with socks, chemical resistant gloves, and goggles. In areas where ventilation is poor, a manufacturer may recommend you wear a mask or a respirator. We have put together two different safety kits that will make selecting the correct safety gear easier for you.
Before you begin your own bed bug treatment, you will need to prepare the room or rooms where bed bugs have been found, in addition to rooms that share walls with the infested rooms. Remove any items in the room that you absolutely cannot treat or that have already been treated. Cover items that will be removed from the room in plastic bags before moving to the next room to prevent any unseen bed bug from infesting another room.
Units that produce “dry” steam are less likely to damage household goods. Steam must be at least 113 degrees Fahrenheit (F), the minimum temperature to kill bed bugs, and care must be taken to reduce pressure so that bed bugs are not literally “blown away” before they can be killed by the steam. Steaming should be avoided around hazards such as electrical outlets.
Other types of bed bug traps include those that do not rely on humans as bait, but instead use CO2and/or other attractants. CO2 is thus far the most powerful lure for bed bugs, as it is the primary cue they follow to locate hosts. Traps that issue CO2 for a period of time are more expensive than Climbup™ traps, but can effectively trap bed bugs when no host is present, such as in common areas, vacant homes or units, offices, schools, and theaters. Thus they can help confirm infestation and eradication.
Itchy swollen bites may be the first sign of a bed bug problem. However, these itchy bites can take as long as 14 days to develop in some people, so it's important to look for other clues if you are concerned about an infestation. Bed bugs typically infest mattresses, box springs, bed frames, and couches. You may be able to find them hiding within the cracks and crevices of beds, furniture, floors, and walls. Bed bugs often leave evidence of small dark stains (fecal droppings) and rusty red spots (bloodstains) on bedding sheets, mattresses, and other areas they hide in or travel along. Heavy bed bug infestations can cause a sweet, musty smell.
Thus, although these insects usually cause mild cutaneous reactions, more severe responses, including anaphylaxis, may occur.  Bullae may be noted. Skin responses at bite sites may evolve from immediate, pruritic, edematous macules into bullae within 24 hours. Histopathologically, an urticarial-like reaction can develop into a leukocytoclastic vasculitis, sometimes with a destructive, necrotizing, eosinophil-rich vasculitis with prominent infiltration of CD68+ histiocytes and collagen necrobiosis.
Research has shown that some bed bugs are resistant to the pyrethroid pesticides that have been most commonly used in recent years by pest management professionals. Likewise, pyrethroids such as deltamethrin and permethrin have been among the active ingredients most commonly available in pesticides at retail stores. The ongoing use of pyrethroids has undoubtedly contributed to the resistance we see today in some bed bug populations.
Although bedbugs are generally nocturnal, they're like humans—if they're hungry, they'll get up and get something to eat. "If you go away to visit a friend for a week and you come back and sit down on the couch, even though it's daytime the bedbugs will come looking for you," Schal says. Keeping a light on, then, unfortunately does not keep these tiny vampires away.
Bedbugs are parasitic arthropods from the family Cimicidae. They are typically less than 1 cm in length and reddish brown in color. Bedbugs can be found in furniture, floorboards, peeling paint, or other small spaces, most commonly in areas of clutter. These insects come out at night in search of prey upon which to feed, with peak feeding times just before dawn. Bedbugs are typically attracted to body heat, carbon dioxide, vibration, sweat, and odor. The image of a Cimex lectularius is shown courtesy of the US Centers for Disease Control and Prevention (CDC).
First off you should ALWAYS go to pest control if you think you have bedbugs! You shouldn’t try and get rid of them yourself, 99% of the time it does not work. Plus even if you removed infected areas and wash them it wouldn’t kill the eggs. Plus bedbugs are very easy to get but very hard to get rid of. So you should never do it yourself it won’t work!
Bed bugs are very hardy insects. Both adults and nymphs can survive prolonged periods without food or under adverse temperature conditions. Adults can live for a year or longer without feeding and can survive over winter in an unheated building. Nymphs are not as hardy as adults, but they can survive for considerable periods under adverse conditions.
Bed bugs occur around the world. Before the 1950s about 30% of houses in the United States had bedbugs. Rates of infestations in developed countries, while decreasing from the 1930s to the 1980s, have increased dramatically since the 1980s. Before the 1980s they were common in the developing world but rare in the developed world. The increase in the developed world may have been caused by increased international travel, resistance to insecticides, and the use of new pest-control methods that do not affect bed bugs.
Excessively scratching the itchy, bitten areas also may increase the chance of a secondary skin infection. Antiseptic creams or lotions can be used to ward off infection and antihistamines can be used to treat the itching. And an infestation can take a psychological toll on those affected: People whose homes have been infested with bedbugs may have trouble sleeping for fear of being bitten in the night. There are also public health, social and economic consequences; office buildings and schools often have to close if they are dealing with a bedbug infestation.
Now that you’ve killed the bed bugs hiding in your bed, it’s time to put up defensive measures to keep them out. Remember, bed bugs can be hiding in all sorts of cracks and crevices throughout your bedroom – in furniture, along baseboards, and inside of the walls – so you need a way to keep them out of your freshly treated bed. By cutting off the infestation’s food supply (you), you halt their breeding and reproductive cycle, making the treatment a whole lot easier.
Have had the same issue. We finally used Diatemacios Earth. Haven’t seen any since we put it down 3 months ago. Drawback to using this is that the powder has to be there. As long as you can see the powder it is working. All baseboards, cracks, crevices and around beds. Even between the boxspring and mattress. It if food grade so it is not harmful to humans or animals.
Heat Treatment – this method kills bed bugs with heat. This could be implemented on clothes by putting them in a drier at a high temperature for 30 minutes. In a room, the use of heating devices could kill even the eggs and the nymphs of bed bugs at certain levels temperature at different durations of time. Ideally, to kill bed bugs in all stages, the temperature must be 115 degrees F or 46 degrees C.
When the controversial pesticide DDT was banned in 1972, most bed bugs were already resistant to it, Schal says, and today's populations are even more widely resistant thanks to the use of a new class of pesticides. Pyrethroids, the main class of pesticides used against bedbugs today, targets sodium channels in bedbug cells, just like DDT. Consequently, as bedbugs develop resistance to pyrethroids, they also become cross-resistant to DDT.
Pull carpet edges back from walls. Being careful, take a pair pliers and gently grab the corners of the carpet and pull the carpet back about 1 foot. Do this one wall at time during treatment. After treatment as described below, replace the carpet and tuck under the baseboards. If you do this 1 wall at time you will not usually need to re-stretch the carpet.
CrossFire Bed Bug Concentrate has two different active ingredients for dual modes of action (both a quick kill and residual activity). Mix 3 oz of CrossFire Insecticide with one gallon of water or 0.75 oz per quart (Remember to use what you mix-within 24 hours.) Adjust the spray pattern to a mist by turning the nozzle. A low fine mist is best for most spraying, but you may need to use a stream to get into some cracks and crevices. If you can't get into the cracks and crevices use one of the aerosols described below with it's crack and crevice tips to reach into these areas.
One method of applying freezing temperatures to bed bugs entails the use of carbon dioxide (CO2) applied as “snow” with a portable application device, i.e., Cryonite™. When applied directly onto bed bugs, the frozen CO2 will kill them. However, this method is similar to using contact pesticides, that is, there is no residual activity. It can kill only as many bed bugs as the applicator can find. The advantage of using this type of freezing device is that bed bugs may be killed quickly and without the use of more hazardous pesticides. Again, this is not a stand-alone treatment, and it is recommended that it be used as a supplemental to the application of residual pesticides and/or other means of control.
First up is the most commonly recommended tool by far: rubbing alcohol diluted in water. This is suggested because alcohol can kill bed bugs on contact, and evaporates shortly after, so it’s considered safe for use pretty much anywhere in a home. A recurring theme in these recommendations are household items that are considered to be safer for people than mainstream chemicals.
DIY bed bug sprays are mostly ineffective in dealing with a large bed bug infestation. This is because a do-it-yourself method lacks proper knowledge on pest behavior to fully control the infestation. For example, bed bugs are real flat and tiny; they hide very well at unexpected places which you may not know. A pest control professional is able to identify key hotspots to treat effectively.
While most of the bed bugs were wiped out by the chemicals, three groups continued to thrive after being treated with chlorfenapyr, and five groups were still kicking after being treated with bifenthrin. That means that while some bed bugs will respond to these chemicals, others won't—and it's likely that more and more bugs will become resistant over time.
I'm a former scientist, using words and an audio recorder as my new research tools to untangle the health and food issues that matter most to consumers. I live in Brooklyn, N.Y., where I cook as much as possible. You can find me in the grocery aisle scrutinizing the fine print of every food item I put into my cart. Follow me on Twitter @juliacalderone.