Individual responses to bites vary, ranging from no visible effect (in about 20–70%),[5][3] to small macular spots, to prominent wheals and bullae formations along with intense itching that may last several days.[5] The bites often occur in a line. A central spot of bleeding may also occur due to the release of anticoagulants in the bug's saliva.[4]
If disposal isn't an option, encasing the mattress and box spring will be helpful if bugs are still present (allergy supply companies sell zippered bed encasements for dust mite prevention). Vacuuming and brushing will further help to remove bugs and eggs from mattresses and box springs that cannot be discarded. Some pest control firms also treat beds with portable steam machines. The technique is useful, but does not kill bugs or eggs that are hidden inside the box spring or mattress.[23]
You must repeat the entirety of Step 2 (except for the mattress and box spring treatment if you are encasing) every 7-10 days until no one in the home has bed bug bites and there is no further evidence (live bugs, cast skins, or fresh blood spots) found. This is absolutely crucial! Depending on the severity of the infestation it can take a minimum of 7-8 weeks, including repeat treatments. Failure to be thorough can prolong the process of getting rid of bed bugs and can make it harder to eliminate them.
If you live in an apartment or condominium, it’s best to alert the property manager.  A coordinated bed bug control effort using a pest control company is generally needed in such situations. Bed bugs readily move from apartment to apartment, with many people unaware that they have a problem. If one apartment is infested, adjoining units (left side, right side, above and below) should be assumed to be infested unless shown otherwise through inspection or monitoring.  Simply asking tenants whether they have bed bugs is not enough.  In one recent study only half of apartment residents whose homes were determined to have bed, bugs knew (or admitted) they had a bed bug problem.
Unlike cockroaches and flies that feed on filth, there is often no relationship between bed bugs and cleanliness. Since the bugs feed solely on blood, pristine dwellings can be as vulnerable to infestation as are places of squalor. That said, poverty and privation can lead to increased risk of bed bug problems, as can the inability to hire a professional exterminator.    
Apply as a coarse, low-pressure spray to harborage areas including crevices, baseboards, loose plaster, behind bed frames and headboards, beneath beds and furniture, and to bedsprings and bed frames. After removal of bed linens, apply Transport Mikron to mattress and boxsprings. Apply to tufts, edges, seams and folds (do not spray clothes or bed linens). Your may apply it to furniture, but not to areas where there is direct access to seating or arm placements. Infested bed linens should not be treated, but should be removed, placed in sealed plastic bags, and taken for laundering and drying at high temperatures.
The size of bed bug bites varies with a number of different factors. Bed bugs inject an anti-coagulant along with their saliva when they pierce the skin to take a blood meal. This anti-coagulant is mostly responsible for how a person reacts to the bite and determines the size of the bug’s bite. Since people will have various sensitivities to the bed bug’s bite, the size of the bite will vary, as well. Another factor that influences the size of a bed bug reaction is the number of times a person is bitten. Bite reactions of people bitten many times are also variable, and their response may be either more or less intense as the number of bites increases.
One method of applying freezing temperatures to bed bugs entails the use of carbon dioxide (CO2) applied as “snow” with a portable application device, i.e., Cryonite™. When applied directly onto bed bugs, the frozen CO2 will kill them. However, this method is similar to using contact pesticides, that is, there is no residual activity. It can kill only as many bed bugs as the applicator can find. The advantage of using this type of freezing device is that bed bugs may be killed quickly and without the use of more hazardous pesticides. Again, this is not a stand-alone treatment, and it is recommended that it be used as a supplemental to the application of residual pesticides and/or other means of control.
Traps aren’t an effective way to wipe out a bed bug infestation, but they’re an excellent way to determine whether you have them. Set traps in areas where they may hide or travel, like near baseboard trim or under nightstands. If they aren’t living in your mattress or other parts of your bed, that means they need to travel up the legs of the bed frame to get to you, so place traps there as well.
Dust every crack and crevice. Every crack and crevice, electrical switch plate, wall switch - EVERYTHING - within 10 to 15 feet of the bed should be treated, particularly those closest to the bed. Use the "running method" of moving the application tip along the length of the crack. Look for cracks from the ground level to the ceiling as you treat each section of the room. Use Cimexa Dust or Delta Dust. If you make a mess, simply wipe it up. To much insecticide is better than too little for bed bug control.
We kept feeling something crawling on us when we sat on tge couch. Then tiny bites Started appearing. After months of trying various cleaning approaches, we contacted Terminex. Their inspector found two bedbugs in the seams of a chair in the bedroom , but nothing on the sofa. They charged me a thousand dollars and steam cleaned both the bed, chair and sofa. About 10 days later, we started getting bites again. Terminex came and “dusted” the areas thus time. This continued for a a few months and them the “inspector” from Terminex said they could fund no signs of the bugs rhe last few times and he thought misquitoes were probably biting us. It has been months now and the problem has worsened. Now I get horrible welts when bitten and we constantly look for tangible signs: excrement, bugs in tape, anything before we call a different extermination company but life has become unbearable. We can’t have guests over because we fear they’ll become infected. It has been and is a truly awful experience.
One bed bug will usually take more than one bite. Once a bed bug inserts its mouthparts and finds a suitable blood vessel, it will begin feeding. However, finding the right blood vessel may take more than one injection into the skin. In addition, bed bugs are very sensitive to movement by the host they are feeding on. Therefore, if a sleeping person moves, a feeding bed bug will probably withdraw its mouthparts and begin its search for a blood meal on another part of the body. It’s important to remember that the number of bites a person receives is not indicative of the number of bed bugs that feed on that person.
Quote: Similarly, bed bugs will perish in extremely cold temperatures. If it is possible to keep a room unheated for a prolonged period of time, it may kill the population. All stages of the common bed bug, from nymphs to adults, can survive for up to five days in temperatures of fourteen degrees Fahrenheit. Prolonged exposure, however, to these temperatures, will kill them.
Insecticides are an effective way to eradicate bed bugs, but not the only way. If you or someone in your house is highly sensitive to chemicals, or you’re just not crazy about the idea of spraying chemicals where you sleep, kill the little blood suckers with heat. Temperatures above 120 degrees F kill all stages of bed bugs. Steamers can be used to treat all the same areas where you would have sprayed contact killers. Steamers like the one shown at (top) cost about $150 and are good for many other projects like removing wallpaper, cleaning tile, removing labels, cleaning engine parts and removing wrinkles from fabric.
Next, apply a bed bug powder into confined areas where it won’t be stirred up into the air. Places like the edges of carpeting, inside deep cracks and wall voids, and inside electrical outlets and light switches (accessed by removing the faceplate with a screwdriver) are good candidates for powders, as sprays can’t reach into these areas quite as well. We recommend using a professional powder applicator, which offers better control when applying the powder.
Isolating your bed from the rest of the house.  If you don’t use a bed, purchase a frame that gets your mattress off the floor and install bed bug interceptors under all feet of the bed frame to keep bed bugs off your bed while you are sleeping. Interceptors are special platforms or cups that are purchased to prevent bed bugs from climbing on to your bed.  An interceptor can be as simple as a sticky card placed under a bed post (sticky and messy).  Better are one of the commercial pitfall traps made specifically for this purpose.  The Climbup™ Bed bug Interceptor and BlackOut BedBug Detector (Google them) are two such products sold online. Relatively inexpensive, these cups trap bed bugs attempting to climb (or exit) the bed. If you have encased your bedding, treated your bed frame thoroughly and installed interceptors, you will be instantly protected against bed bugs.  Don’t take out your clean bedding or put it back on the bed until the bed has been treated (and dried) and encasements installed. And note that for this method to be effective, beds and bedding must not touch the floor, furniture or walls.  This would provide bed bugs other ways to climb onto the bed and foil your defenses.
Aerosols (D-Fense NXT, Crossfire Aerosol, or Bedlam Plus) Usage: Simply attach the plastic tip to the aerosol can. Apply as a crack and crevice or spot treatment where evidence of bed bugs occurs. This includes bed frames, box springs, inside empty dressers, clothes closets, curtain rods, hollow spaces, carpet edges, high and low wall moldings and wallpaper edges.
You can check bedding, mattresses, furniture, and crevices in walls for bed bug infestation. Do your inspection just before dawn, which is when they are the most active. The bugs will be larger and slower after feeding. Bedbugs will quickly flee from light, so live bugs are best located in the folds and seams of mattresses and sheets. Bedbugs are about the size of an apple seed, about 1/4 inch long. They change from light brown to purple-red after feeding. You may also see their eggs, which are about the same size as the adults. The eggs will often be in seams, cracks, or crevices.
Bed bugs are very hardy insects. Both adults and nymphs can survive prolonged periods without food or under adverse temperature conditions. Adults can live for a year or longer without feeding and can survive over winter in an unheated building. Nymphs are not as hardy as adults, but they can survive for considerable periods under adverse conditions.
It often seems that bed bugs arise from nowhere. The bugs are efficient hitchhikers and are usually transported into dwellings on luggage, clothing, beds, furniture, and other items. This is a particular risk for hotels and apartments, where turnover of occupants is constant. Bed bugs are small and agile, escaping detection after crawling into suitcases, backpacks and belongings. Acquiring secondhand beds, couches and furniture is another way that the bugs are transported into buildings. Bed bugs also can be carried in on one’s clothing, shoes or wheelchair. Once bed bugs are introduced, they can crawl from room to room or floor to floor. They can also be transported throughout buildings on people and their belongings. 

I can definitely understand. This is has been going on with us for almost a year. My hands and arms look like I have leprocy or something. Horrible blisters, rash, scabs, and bunches of “bumps” especially in my right hand. I wind up with painful blood blisters some times. I am living on benedryl and calamine lotion. I hate going out because of what I look like. I have taken to using cover up and foundation on my hands to make the mess less noticable. i have a long-sleeved summer weight sweater that I wear whenever I do have to go out.

The best method of inspection is always using your body. Bed bugs have to have a blood meal, so if they persist after your treatment, they will find you. If you don't want them biting you and you want to get a good nights rest, then be sure to encase your mattresses, using climb-up bed bug interceptors on your bed frame and post and place Bed Bug Traps around to help monitor bedbug movement.  Replace traps every 90 days.
Bedbug bites may go unnoticed or be mistaken for flea or mosquito bites or other types of rash or skin conditions, since the signs of bedbug bites are difficult to distinguish from other bites or skin conditions. Bedbugs also have glands whose secretions may leave musty odors, and they also may leave dark fecal spots on bed sheets and around places where they hide (in crevices or protected areas around the bed or anywhere in the room).
Whether you use traps or not, beds and bedclothes should not touch walls or furniture, and bed clothes should not contact the floor. In this way the bed is isolated, forcing bed bugs that attempt to access a sleeping person, to enter the traps, be captured and expire. Wrapping double-sided carpet tape or duct tape around bed legs also can trap bed bugs attempting to enter beds.
Track your success. Interceptor cups under your bed posts are also one of the best ways of keeping track of your success with bed bug control. Check the cups regularly and empty into a trash bag or bucket of soapy water.  You may even want to keep track of how many bed bugs you catch weekly so that you can track your success. Wipe out the interceptors and make sure they are clean. Some devices, like the Climbup Interceptor, require redusting with a very small amount of talcum powder to make them slippery again and reduce the bed bug’s chance of escape. Note that talc is not toxic to bed bugs, but simply makes it harder for them to climb out of the cup.  The talc should be barely visible, and more is definitely not better.
Bedbugs normally feed at night, usually approximately 1 hour before dawn. However, if the conditions are favorable, they also feed during the day. Feeding takes 3-12 minutes. In proper conditions, adult bedbugs can survive without a meal for 1 year or longer. Each female lays approximately 300 eggs in her lifetime. The eggs hatch in 10 days. The nymph stage lasts 6 weeks, undergoing 5 molts.

The best bed bug traps are those that are used under the bed. The Climb-Up Bed Bug Interceptor is placed below the bed frame rollers or legs. The Climb-Up prevents bed bugs from being able to crawl either from the bed to the floor or from the floor to the bed. The Climb-Up works very well at isolating the bed from the floor and making it bed bug proof. As long as the comforter or some other linen is not touching the floor, then the bed is protected.


Next, apply a bed bug powder into confined areas where it won’t be stirred up into the air. Places like the edges of carpeting, inside deep cracks and wall voids, and inside electrical outlets and light switches (accessed by removing the faceplate with a screwdriver) are good candidates for powders, as sprays can’t reach into these areas quite as well. We recommend using a professional powder applicator, which offers better control when applying the powder.
Treatment for bedbug bites is typically supportive. Local antiseptic lotions or antibiotic creams can be applied for secondary infections, whereas corticosteroid creams and oral antihistamines can be used for allergic reactions. Bedbugs can be eliminated through the use of permethrin insecticides, baited traps, special bedbug-free beds, and bed nets. Homemade methods, such as wrapping duct tape around bed legs as shown, may be effective, but bedbugs have been known to climb other objects and then fall down onto a bed. Image courtesy of Wikimedia Commons.
One of the easiest ways to identify a bed bug infestation is by the tell-tale bite marks on the face, neck, arms, hands, or any other body parts while sleeping. However, these bite marks may take as long as 14 days to develop in some people so it is important to look for other clues when determining if bed bugs have infested an area. These signs include:
Treatment is symptomatic.[2] Eliminating bed bugs from the home is often difficult, partly because bed bugs can survive up to a year without feeding.[2] Repeated treatments of a home may be required.[2] These treatments may include heating the room to 50 °C (122 °F) for more than 90 minutes, frequent vacuuming, washing clothing at high temperatures, and the use of various pesticides.[2]
Dusts last longer than aerosols, but the crack and crevice tips on the Phantom and Bedlam areosols enable you to get into the smallest cracks. It is a good idea to use a combination of sprays and dusts. Temprid SC may be used on the tufts and seams of mattresses. It works well as a residual insecticide sprayed in other recommended treatment areas such as night stands, chests, dressers, couches and chairs.
To prevent bringing bed bugs to one's own home, travelers are advised to take precautions after visiting an infested site: generally, these include checking shoes on leaving the site, changing clothes in a garage before returning to their home, and putting the used clothes in a clothes dryer outside the house. When visiting a new lodging, it is advised to check the bed before taking suitcases into the sleeping area and putting the suitcase on a raised stand to make bedbugs less able to crawl in. "An extreme measure would be putting the suitcase in the tub." Clothes should be hung up or left in the suitcase, and never left on the floor.[29] The founder of a company dedicated to bedbug extermination said that 5% of hotel rooms he books into were infested. He advised people never to sit down on public transport; check office chairs, plane seats and hotel mattresses, and monitor and vacuum home beds once a month.[30]
Harris bed bug killer is another popular chemical spray to eliminate bed bugs from your home. The manufacturers say that Harris Bed Bug Killer can be used on all soft fabrics to get rid of bed bugs as it won’t stain. You can also spray the solution in all nooks and crannies in your bed frame, furniture, and corners of your room to exterminate the bugs. It is also odorless. You can get more information about Harris bed bug killer and purchase it in Amazon here.
While alcohol can kill bed bugs on contact, it’s not going to kill nearly enough of bed bugs to be considered effective. In lab studies, even 99 percent concentrations of alcohol only killed between 40% to 60% of the adults that were sprayed. On top of that, alcohol has no long-lasting residual effect, and doesn’t affect bed bug eggs. 60% sounds good, but a contact killer should be able to kill a lot closer to 100% of the bed bugs you see. Otherwise, a shoe or a blowtorch would be the more reliable tool for the job. (Editor’s note: please don’t use a blowtorch.)

One trick to make this disposal easier involves using the cut-off end of a nylon stocking (or a knee-high nylon stocking) and a rubber band. Insert the stocking (toe first) into the end of the vacuum suction wand/tube, leaving the opening of the stocking protruding out of the end of the suction wand. Then fold the stocking opening back over the end of the wand and use the rubber band to secure it there. When the vacuum is turned on and the bed bugs are sucked into the tube, they will be trapped in the stocking. Afterwards, carefully remove the rubber band and retrieve the bug-filled stocking. Then secure the end of the stocking with the rubber band and dispose of it. 


Fumigation using a penetrating gas is another way to de-infest dwellings or furnishings, but the procedure is only offered by certain companies. True fumigation is not the same as setting off a total release fogger or ‘bug bomb.’ (It should be noted that bug bombs are considered ineffective in the treatment of bed bugs, and can be quite dangerous if misused.) The fumigation process is technically complex and requires vacating the building for a period of days. The building is then sealed and injected with a lethal gas, usually sulfuryl fluoride. Because the entire building must be vacated, structural fumigation is logistically more challenging with multi-unit buildings such as apartments, than for single family homes. Bed bug fumigations tend to be more common in southern and western states, where the procedure is also used to control certain types of wood-dwelling termites.  
It’s not likely that you’ll kill all the bed bugs with a bed bug spray. That’s where a residual powder insecticide comes into play. It kills any bugs that wander through the powder. Some powders can kill bugs for many years if left undisturbed. Skip the open areas and spray the powder in those places where you think they’ll be traveling to and from, like near bed legs and under baseboard trim.
Use your vacuum's nozzle attachment to capture the bed bugs and their eggs. Vacuum all seams and crevices on your mattress, bed frame, baseboards, and any other objects close to the bed or furniture in the home found to be harboring bed bugs. It is essential to vacuum daily and immediately place the vacuum's contents into a sealed plastic bag and throw it away in an outdoor garbage can.
Bed bugs are troublesome household pests. They’re sneaky, hard to find, and can pose potential health risks for you and your family. Armed with pest control capabilities backed by science, over 100 years of experience, and state-of-the-art tools and products, Orkin is well-equipped to assess your bed bug problem and mount a strategic response to rid your home of the pest and provide maximum protection.
If you suspect that bed bugs might be hiding in items that can’t be laundered or steamed, like books, papers, luggage, shoes, and dry-clean only clothing, you can treat those with a portable bed bug heater. Heaters are a popular way to safely heat-treat items during bed bug treatments, or as a preventative tool for travelers who want to ensure that bed bugs can’t escape from their luggage to infest their home.
The scientific name for bed bugs is Cimex lectularius. They are small creatures that grow up to 5 mm in size, or about the size of an apple seed. They have a flat oval-shaped body and will become significantly larger if they have fed. According to the United States Environmental Protection Agency, bed bugs start life as a tiny egg, then grow into a nymph before becoming an adult.1
Dust the wall voids. Bed bugs can often travel from room to room, especially in apartments, hotels and condo's. They travel along electrical wiring and plumbing lines. Specifically treat wall voids with a hand duster either by removing wall switch plate covers and/or drill access holes discreetly between studs. Cimexa Dust or Delta Dust are excellent choices for void applications. It kills populations in walls and voids and creates a repellent, hostile environment which reduces the likelihood of bed bugs traveling through voids to other areas. Use a small hand type duster to "puff" insecticidal dusts into these areas. A light coating is all that is needed. To much dust and the bed bugs will just crawl around it.
Research has shown that some bed bugs are resistant to the pyrethroid pesticides that have been most commonly used in recent years by pest management professionals. Likewise, pyrethroids such as deltamethrin and permethrin have been among the active ingredients most commonly available in pesticides at retail stores. The ongoing use of pyrethroids has undoubtedly contributed to the resistance we see today in some bed bug populations.
Harris bed bug killer is another popular chemical spray to eliminate bed bugs from your home. The manufacturers say that Harris Bed Bug Killer can be used on all soft fabrics to get rid of bed bugs as it won’t stain. You can also spray the solution in all nooks and crannies in your bed frame, furniture, and corners of your room to exterminate the bugs. It is also odorless. You can get more information about Harris bed bug killer and purchase it in Amazon here.
I'm a former scientist, using words and an audio recorder as my new research tools to untangle the health and food issues that matter most to consumers. I live in Brooklyn, N.Y., where I cook as much as possible. You can find me in the grocery aisle scrutinizing the fine print of every food item I put into my cart. Follow me on Twitter @juliacalderone.
First up are the contact sprays, like STERI-FAB and JT Eaton Kills Bed Bugs. These will kill quickly, but evaporate shortly after, leaving no long-lasting protection. Spray along baseboards, below drawers and on drawer slides, behind cabinets, and behind night stands. Follow up with a residual spray, such as Bedlam Plus and JT Eaton Kills Bed Bugs Plus. Residual sprays will offer long-lasting protection against bed bugs and hatchlings. Bedlam Plus is ideal for cracks and crevices throughout the room, while JT Eaton Plus can be used below the cushions and bases of sofas, chairs, edges of carpets and other fabric items.
Quote: Similarly, bed bugs will perish in extremely cold temperatures. If it is possible to keep a room unheated for a prolonged period of time, it may kill the population. All stages of the common bed bug, from nymphs to adults, can survive for up to five days in temperatures of fourteen degrees Fahrenheit. Prolonged exposure, however, to these temperatures, will kill them.
Mix an insecticide labeled for use on bed bugs, such as Temprid FX, with water in a pump sprayer using the ratio found on the product label to create a bed bug spray. Spray onto baseboards, in corners, around door and window frames, around bed frames, and under furniture. Do not broadcast spray an entire carpet or floor. Allow the spray to dry before moving on to the next step.
Bed bug infestations have resurged since the 1980s[43] for reasons that are not clear, but contributing factors may be complacency, increased resistance, bans on pesticides, and increased international travel.[44] The U.S. National Pest Management Association reported a 71% increase in bed bug calls between 2000 and 2005.[45] The number of reported incidents in New York City alone rose from 500 in 2004 to 10,000 in 2009.[46] In 2013, Chicago was listed as the number 1 city in the United States with the worst bed bug infestation.[47] As a result, the Chicago City Council passed a bed bug control ordinance to limit their spread. Additionally, bed bugs are reaching places in which they never established before, such as southern South America.[48][49]

Well, among others, you would want to purchase Bed Bug Bully. As stated in FIFRA 25 (b), it is a minimum-risk pesticide. That’s because it is made with organic-based products. More than that, pest-control companies already proved that they truly work withtheir continuous use of it. And with its new licensing agreement, you could also now enjoy its effectiveness, safety and affordability.
Bed bugs are one of the most difficult pest problems to eradicate quickly. By far, the best solution for bed bugs is to hire a pest control company with experience successfully controlling bed bugs. Unfortunately, this can be expensive and beyond the means of many people. If you feel you cannot afford to hire a professional, and want to attempt do-it-yourself bed bug control, there are some things you can do. With diligence and patience and some hard work you have a fighting chance of getting rid of bed bugs in your home.
When professionals need to treat an infestation, they don’t reach for rubbing alcohol or cedar oil or a blow dryer. They use a proven treatment process that involves a combination of proven products to get the job done. It’s not about whether or not a certain item can kill bed bugs, it’s about whether that item is the ideal part of a treatment that will actually get rid of an infestation. After all, your shoe would have a 100% kill rate on any bed bugs you smack with it – that doesn’t mean you can expect to be bed bug free after a diligent afternoon of shoe-wielding. 

Mix an insecticide labeled for use on bed bugs, such as Temprid FX, with water in a pump sprayer using the ratio found on the product label to create a bed bug spray. Spray onto baseboards, in corners, around door and window frames, around bed frames, and under furniture. Do not broadcast spray an entire carpet or floor. Allow the spray to dry before moving on to the next step.
you have to get the heat treatment on your house & wash & dry EVERYTHING you own in a very hot dryer some there maybe some help to pay for it if you own your home w a no interest loan or if you rent you better tell your landlord he needs to treat his whole property & i bet he wont be happy its very expensive my moms apt bldg gets a dog checking every unit & its $850 for her tiny one bedroom..i just read a house can be $1500 to $2000 theres a hair treatment too its a very hot comb that costs about $150 a person..you cant be going to peoples homes anywhere you go youre spreading the joy
Apply residual Bed Bug Insecticide Spray. After every crack, crevice, switch plate, electrical switch, baseboard, box springs, mattress, etc, has been treated and everything is put back, it is time for the residual treatment. Using a hand held sprayer such as the Chapin Sure Spray apply Optimate, Cy-Kick, Suspend SC or Demand along the baseboards in the bedroom and closet, under and around the bed, behind the headboard, inside bed stands etc.
Bed bugs like to travel and are good hitchhikers. They will hide in suitcases, boxes and shoes to be near a food supply. They are elusive, nocturnal creatures. They can hide behind baseboards and in cracks, crevices, and folded areas of beds, bedding and adjacent furniture, especially mattresses and box springs. Bed bugs can also hide in electrical switchplates, picture frames, wallpaper and nearly anywhere inside a home, car, bus, or other shelter. Bed bugs usually come out at night for a blood meal. However, they are opportunistic insects and can take a blood meal during the day, especially in heavily-infested areas. Bed bugs usually require 5-10 minutes to engorge with blood. After feeding, they move to secluded places and hide for 5-10 days. During this time in the bed bug life cycle, they do not feed but instead digest their meal, mate, and lay eggs.
First up are the contact sprays, like STERI-FAB and JT Eaton Kills Bed Bugs. These will kill quickly, but evaporate shortly after, leaving no long-lasting protection. Spray along baseboards, below drawers and on drawer slides, behind cabinets, and behind night stands. Follow up with a residual spray, such as Bedlam Plus and JT Eaton Kills Bed Bugs Plus. Residual sprays will offer long-lasting protection against bed bugs and hatchlings. Bedlam Plus is ideal for cracks and crevices throughout the room, while JT Eaton Plus can be used below the cushions and bases of sofas, chairs, edges of carpets and other fabric items.
×